Used in South Korea

2016 DONGKUK ENC DMR 2

• Manufacturer: DONGKUK ENC

Building roof Capa : 300 meter cube/min - 1 Set Lot type: Make Offer | Inventory id: AP250173

2x 'Production Machinery Co.' Annealing and Pickling Lines

• Manufacturer: 'PRODUCTION MACHINERY CO'

‘PRODUCTION MACHINERY CO’ Continuous Annealing & Pickling Line No. 1 max. 50 kg/mm2 annealed material max. 50 kg/mm2 hot rolled material max. 60 kg/mm2 annealed material max. 50 kg/mm2 hot rolled material 3 – 6 m...

‘HAEUSLER’ 60,000 TPY LSAW WELDED PIPE PRODUCTION LINE (1991/2014)

• Manufacturer: Haeusler

Hyundai RB Onsan Factory, located at Ulsan in South Korea produces welded pipes by means of LSAW – Longitudinal Submerged Arc Welding process. The line is offered complete, featuring advanced HAEUSLER (Switzerlan...

'HONDA' Slitting / Recoiling Line

• Manufacturer: 'HONDA'

‘HONDA’ Slitting Line 70 kgs/mm2 > tensile strength > 53 kgs kgs/mm2 52.5 kgs/mm2 > yield points > 21 kgs kgs/mm2 min. 45 mm exit 508 mm exit 40 m/min max. (2.0 – 3.5 mm) Utilities: Electric power: 60Hz 3Ø 440V ±...

'HONDA' Cut-to-Length Slitting and Shearing Line

• Manufacturer: 'HONDA'

‘HONDA’ Shearing Line with Side Trimmer and 2 x 6-High Finish Levellers 70 kgs/mm2 > tensile strength > 53 kgs kgs/mm2 52.5 kgs/mm2 > yield points > 21 kgs kgs/mm2 max. 60 mpm max. (0.3 – 2.0 mm) Mechanical equip...

'PRODUCTION MACHINERY CO' Grinding and Polishing Line

• Manufacturer: 'PRODUCTION MACHINERY CO'

‘PRODUCTION MACHINERY CO’ Grinding and Polishing Line AISI 300 and 400 Series (Annealed and Pickled) 3 – 6 mm hot rolled min. 1,000 mm 10 – 20 mpm polishing (high) min. 13,500 kg high speed 4 top side grinders (2...

'PRODUCTION MACHINERY CO' Coil Preparation Line

• Manufacturer: 'PRODUCTION MACHINERY CO'

‘PRODUCTION MACHINERY CO.’ Coil Preparation Line AISI 300 and 400 series 610 exit 2000 entry and exit max. 2200 mm incl. paper 4 – 10 m lenght max. 40 mm Mechanical equipment list: – Entry Coil Storage Saddle – E...

'SMS' 2-Hi Skin Pass Mill

• Manufacturer: 'MANNESMANN DEMAG SACK'

‘SMS-DEMAG-SACK’ Skin Pass Mill AISI 300 and 400 Series, Cold Rolled and Annealed min. 750 mm Mill gear: ratio : I=15,197 max. 1,200 tons max. 630 mm nominal 610 mm Skin Pass Mill Roll Shop: – Roll Grinder KWB8-4...

'SMS' 20-Hi ZM Cold Strip Mill – DEMAG AGC, LH Line

• Manufacturer: Demag

‘SMS-DEMAG-SACK’ 20-Hi Sendzimir Reversing Cold Strip Mill- 2 AISI 300 and 400 series min. 510 mm 0.3 – 3.5 mm exit (with paper and sleeves) max. 1950 mm min. 10000 mm spec. 15 kg/mm strip width Unwinder: n = 0-4...

'SMS' 20-Hi ZM Cold Strip Mill – TENOVA AGC, RH Line

• Manufacturer: Tenova

‘SMS-DEMAG-SACK’ 20-Hi Sendzimir Reversing Cold Strip Mill AISI 300 and 400 series min. 510 mm 0.3 – 3.5 mm exit (with paper and sleeves) max. 1,950 mm min. 1,000 mm spec. 15 kg/mm strip width Unwinder: n = 0-408...

HYUNDAI RB JCO-LSAW Welded Pipe Production Lines (NEW)

• Manufacturer: HYUNDAI RB
• Model: RB

Hilco Industrial is the selected partner by Hyundai RB to facilitate the sale of new LSAW Welded Pipe complete production lines as well as individual machinery, designed and manufactured by Hyundai RB (South Kore...

2015 MAN 7L27/38

• Manufacturer: MAN
• Model: 7L2738
• Hours: 0 hour
• Power: 2,450 kilowatt

The 2015 MAN 7L27/38 generator set, new and unused, features robust performance with a maximum continuous output of 2,450 kW. It is equipped with a 7-cylinder engine, each cylinder boasting a bore and stroke of 2...

EOT Cranes

12 x EOT (Electric Overhead Travelling) Cranes belonging to Hyundai Steel Thin Plate Steel Plant Facility: CRANE No. HC-008 Lifting Height (meters) Lifting Capacity (tons) CRANE No. HC-013 Lifting Height (meters)...

'KOBE-HANJUNG-YASKAWA' Skin Pass Mill No. 1 (1995/2019)

• Manufacturer: 'KOBE-HANJUNG-YASKAWA'

4 pts inner diam. Measuring devices: · Thickness Gauge (Thermo Fisher Scientific, 2011) · Width Gauge (Palmatech, 2018) · Center Position Controller (Nireco, 2015) · Coil Weigher (Kumyong Yamato, 2019) ROLLING RO...

'SMS' Compact Strip Process (1995/2011)

• Manufacturer: 'SMS'

CSP - COMPACT STRIP PROCESS | TSCR - THIN SLAB CAST & ROLLING This compact facility produces high-quality hot strips in a single manufacturing line that combines casting, heating, and rolling. The caster funnel-s...