Used engine

18 x 10.5 ft (5.5 x 3.2 m) Fuller FLS SAG mill with 1,500 HP

SAG mill, 18 ft diameter, 10.5 ft length. - Manufactured by Fuller 1995 - Rubber-lined, used rubber liners included - 1500 HP, 4160 volt, 1192 RPM, continuous motor, 5010 frame Motor, rebuilt and inspected. - Sp...

20 x 10 ft (6.1 x 3.05 m) ANI FLSmidth SAG Mill with 2,500 HP

• Manufacturer: FLSmidth

- 20 ft diameter by 10 ft shell (6.1 x 3.05 meter) - Manufactured by ANI/FLS - Includes WEG 2,500 HP motor - Enclosed gear drive made by David Brown - Inching drive - Mill is currently operational and installed -...

21 x 11 ft Hardinge SAG mill with 2,875 HP

• Manufacturer: Hardinge

21 x 11 ft Hardinge SAG mill with 2,875 HP - Mill is currently removed and in storage - Without liners or bolt package - Nuttall gear reducer - McLellan liner handler available separately - Spare motor available...

22 x 7 ft (6.7 x 2.1 m) Hardinge SAG Mills

• Manufacturer: Hardinge

22 ft x 7 ft (7 x 2 m) Hardinge SAG Mills - Motor Quoted separately - Previously ran on two 800 HP motors - Dual Flender gearboxes - Shell reconditioned

32 x 12 ft (9.8 x 3.6 m) Hardinge Koppers ( Metso) SAG Mill 6800 HP

• Manufacturer: Hardinge

32 x 12 ft (9.8 x 3.7 m) Hardinge Koppers SAG Mill 6800 HP (5100 kW) Two GE wound rotor induction motors: - 3400 HP - 710 RPM - 4000 V - Includes motor starter. - Includes lube system and temperature sensors. - F...

36 x 17 ft (11x5m) Unused FLS SAG Mill with 18,350 HP (13,5009 kW)

- Unused surplus FLS Fuller-Traylor SAG mill - ABB brand 13,500 kW (18,350 HP) drive - Wrap around style drive motor - Braking system - Complete liner package - Feed chute - Hydraulic jacking system - Specialty t...

11 x 300 ft (3.5 x 97 m) FLSmidth Rotary kiln

• Manufacturer: FLSmidth

- Ring gear and pinion driven - Multi-section steel shell - Gearbox - Burner - Motors - Serparators - Electrical control panels - Dismantled and ready for inspection and shipping

New Galigher-Style Vertical Pump, Series 5000

• Manufacturer: Galigher

- Galigher style vertical sump pump - Interchangeable with original Galigher pumps - 5,000 series heavy duty pumps - Natural rubber wear parts - Heavy duty bearing assembly and mechanical components - Belt guard ...

New Galigher Style Series 1000 Vertical Pumps

• Manufacturer: Galigher

- Galigher Style pumps interchangeable with Series 1000 - Totally sealed bearings - Bottom box and top plate coated in vulcanized rubber - Semi-open impeller coated with abrasion-resistant polyurethane - 4140 ste...

New Wemco-Style flotation cells

• Manufacturer: Wemco

- New and unused flotation cells made to order in North America - Complete with mechanism, belt guards, and motor baseplate - All necessary cell and mechanism parts coated with protective 520 natural rubber (incl...

New Unused Krebs style Cyclones Made to Order

- New and unused cyclones made to order in Krebs and Denver styles - Fully assembled - Interior covered with 1/4 inch thick vulcanized rubber - Victaulic connections for feed and discharge - Variety of Apex and I...

#15 Sub-A Denver Flotation Cell Package

- Denver Sub-A flotation cells - Designed as rougher/scavenger circuit - 2 banks of 6 - 1 bank of 2 - 5 HP motors, 1 per bank of 2 and 2 motors per bank of 6 - 12 cubic foot cells - Motor guards - Pulleys - Prime...

Thermal Technologies unused surplus Elution Heaters

- Thermal Technologies unused surplus Elution Heaters - Two independent skids - Each Skid has 8 bundles - Each bundle rated 480v 3ph @ 313kw - (Total 2,504 kW per skid) - (5,008kw total) - 12″ NPS 316L SS shells ...

Unused surplus Peerless vertical turbine pumps with 200 HP

- Unused surplus Peerless vertical turbine pumps with 200 HP WEG motors - Pumps made in USA - 3 units available - Design rating of 1065 cubic meters per hour - Model 20HH - Closed impeller - 460 V motor, TEFC

8 ft 10 in x 8 disc EIMCO vacuum disc filter

• Manufacturer: Eimco

- 8 disc filter unit - 180 sq meter filter area (890 sq ft) - Nash vacuum pump - 200 HP induction motor belt drive