Used Mineral Processing

Mill, Sag, 38' X 25'5", Metso, 26,016 HP, Unused #D739643

• Manufacturer: Metso

Unused Metso sag mill, 38' (11.58 m) diameter x 25' 5" (7.76 m) long, 26,016 HP (19,400 kw) Siemens wrap around drive motor-operating frequency 50/60 Hz. EGL: 22' (6.7 m), mill speed: 7.5-10.08 RPM. Maximum volum...

2002 JCI 10121-32HDS

• Manufacturer: JCI

2002 JCI 10121-32HDS Heavy Duty 10 x 12’ Skid-Mounted Step-Deck Inclined Rip Rap VGF w/ Dual 40 HP Induction Motors, Double Vibration Isolators, 5-Section Bolt-Together Skid Structure 36 x 26’, Hopper & Chute, Da...

AGITAIR brand flotation cell system, 2.20 m long

• Manufacturer: AGITAIR

AGITAIR brand flowering cell system, 2.20 m long 5 mechanisms, 2.20 m long 1 m diameter pulley with 3 grooves 1 mechanism without pulley (MTY) 1 m diameter pulley with 3 grooves 1 mechanism without pulley Used, n...

2-cell flotation bank No. 24 with a capacity of 50 cu ft, GALIGHER brand

• Manufacturer: Galigher

GALIGHER 24-cell flotation bench with 50 cu ft capacity No. 24 Used - No service Motor specifications: Brand: ALLS-CHANLMERS Serial no.: 1-5124-86631-1-21 General Dimensions:

2-cell flotation bank No. 24 with a capacity of 50 cu ft, GALIGHER brand

• Manufacturer: Galigher

GALIGHER 24-cell flotation bench with 50 cu ft capacity No. 24 Used, in workshop Engine specifications: Brand: ALLS-CHANLMERS Serial no.: 1-5124-86631-1-7 General Dimensions:

2-cell flotation bank No. 24 with a capacity of 50 cu ft, GALIGHER brand

• Manufacturer: Galigher

2-cell flotation bank No. 24 with 50 cu ft capacity, GALIGHER brand No. 24 Used - No service Motor specifications: Brand: STERLING A.C. MOTOR Serial no.: M4512-4 General Dimensions:

Replacement rubber shield for 7x10 mill

Replacement rubber shield for 7x10 mill REF-205 Shims, 1.14 m long, curved type (12 pcs) Shims, 1.24 m long, curved type (1 pcs) Shims, 1.88 m long x 9 cm wide x 6 cm long (1 pcs) REF-206 Shims, 1.32 m long, Skec...

32" x 17" x 3" Manganese Steel Mill Wall Armor

• Manufacturer: NO-DISPONIBLE

32" x 17" x 3" Manganese Steel Mill Wall Armor With 1 Hole Only For Mill Wall Never Used

Lainer or shield for mill Part No. L22H

• Manufacturer: NO-DISPONIBLE

New mill shielding, part no. L22H 1 piece 19″ x 23″ with two holes spaced 10″ apart, weighing 113 kg 1 piece 24″ x 24″ with two holes spaced 12″ apart, weighing 131 kg 1 piece 14″ x 24″ with two holes spaced 11″ ...

Side guards for flotation cells 1.69 M X 1.27 M

• Manufacturer: NO-DISPONIBLE

Side guards for flotation cells 1.69 M X 1.27 M Thickness 1/8'' Never used

Side guards for flotation cells 1.82 M X 1.43 M

• Manufacturer: NO-DISPONIBLE

Side guards for flotation cells 1.82 M X 1.43 M Thickness 1/8'' Never used

Cummins 4089301RX PUMP WATER

• Manufacturer: Cummins

Cummins 4089301RX PUMP WATER Water pump brand: Komatsu Never used PCP

87″ wide x 38″ diameter magnetic roller

87″ wide x 38″ diameter magnetic roller PCP Measures of: 87" wide x 38" diameter | Product type: silver | Branch: [{"id"=>1, "name"=>"Hermosillo, Sonora, Mexico", "slug"=>"hermosillo-sonora-mexico"}] | Main indus...

Spinktek ST-11-3 Disc Filter, Stainless Steel #4444671

• Manufacturer: Spinktek Systems

Spintek Systems Model number ST-11-3 stainless steel disc filter. Equipment is driven by under-mounted drive, direct connected to spinning discs. Rated for 3-phase, 60-cycle, 460 volt, 70 PSI. Unitized on portabl...