Used Sheet Metal Processing

Trusted Seller
Flagler 24 Junior Pittsburgh 10-000
- Manufacturer: Flagler
Call for Status and Pricing Ideal for small to medium sized sheet metal contractors or jobsite manufacturing.
Lynchburg, VA
1/4″ x 10″ Hydraulic Sheet Metal Notcher with Fixed Angle
The GMC Hydraulic Notcher delivers clean and sharp corner cuts. You can notch up to a 1/4″ thick sheet metal up to 12 strokes per minute. You can re-sharpen the blades repeatedly to improve the lifespan and save ...
Sutton, MA
Trusted Seller
Flagler 20 Ga. High Speed Pittsburgh 16-000
- Manufacturer: Flagler
Call for Status and Pricing Ideal for medium to large sized sheet metal contractors. Built on the same frame as the Flanger 16 Ga. Pittsburgh machine, makes this the most robust 20 Ga. Pittsburgh on the market. ...
Lynchburg, VA
Trusted Seller
Rollformer Quick hemmer QH-50
- Manufacturer: NBH Machinery
Call for Status and Pricing The benchtop Quickhem machine eliminates much of the time consuming brake work with the hem and kick in the fabrication of gravel stop, drip edge and coping. Ideal for roofing contract...
Lynchburg, VA
Trusted Seller
Trumpf TruTool F 300
- Manufacturer: Trumpf
- Model: F 300
Call for Status and Pricing The TruTool F 300 is ideal for closing Pittsburghs seams on straight or curved ducts. You can work quickly with the quiet roll/glide process and achieve a tight connection. The sheet t...
Lynchburg, VA
Trusted Seller
Mestek Automated Collar Attaching Machine CM-58-2
- Manufacturer: Mestek
Call for Status and Pricing Iowa Precision Collar-Matic Automated HVAC Duct Collar Production System takes the handwork out of collar production for collar/boot assemblies. The system uses convenient 2-1/8″ drive...
Lynchburg, VA
Trusted Seller
Mestek Automated Collar Attaching Machine CM-58-3
- Manufacturer: Mestek
Call for Status and Pricing Iowa Precision Collar-Matic Automated HVAC Duct Collar Production System takes the handwork out of collar production for collar/boot assemblies. The system uses convenient 2-1/8″ drive...
Lynchburg, VA
Trusted Seller
Mestek Automated Collar Attaching Machine CM-47-2
- Manufacturer: Mestek
Call for Status and Pricing Iowa Precision Collar-Matic Automated HVAC Duct Collar Production System takes the handwork out of collar production for collar/boot assemblies. The system uses convenient 2-1/8″ drive...
Lynchburg, VA
Trusted Seller
Mestek Iowa Precision AEMTM 3-16 Tube-Matic Elbow blanking machine
- Manufacturer: Iowa Precision
Call for Status and Pricing The Iowa Precision Tube-Matic HVAC Duct Elbow Blanking Machines provide highly accurate punched, crimped, beaded and rolled blanks ready for processing and is an ideal companion line f...
Lynchburg, VA
Trusted Seller
Flagler Collar Maker
- Manufacturer: Flagler
Pre-Owned Flagler 22ga Pittsburgh Collar Maker, serial number 5552-8-00.
Lynchburg, VA
Trusted Seller
Lockformer, Mestek Lockformer Triplex Cleatformer
- Manufacturer: Lockformer
Pre-owned Lockformer Triplex cleatformer with S-cleat, drive-cleat inboard, 5/16″ Pittsburgh rolls and 4-in-1 rolls outboard, and S&D Cutter attachment. Serial number TRI1620. 3phase/230volts. The flexible Loc...
Lynchburg, VA
Trusted Seller
Lockformer, Mestek Lockformer Spiral Tube Former 2.0 for Spiral Duct
- Manufacturer: Lockformer
Call for Status and Pricing up to 18 gauge (1.25 mm) thickness with a maximum speed of 235 ft/min (71 m/min) from 28-14 gauge (0.50-2.0 mm) thickness with maximum speeds of 287-344 ft/min (84-104 m/min) Features ...
Lynchburg, VA
Trusted Seller
Lockformer, Mestek Lockformer Spiral Tube Former 1.2 for Spiral Duct
- Manufacturer: Lockformer
Call for Status and Pricing up to 18 gauge (1.25 mm) thickness with a maximum speed of 235 ft/min (71 m/min) from 28-14 gauge (0.50-2.0 mm) thickness with maximum speeds of 287-344 ft/min (84-104 m/min) Features ...
Lynchburg, VA
Trusted Seller
Lockformer, Mestek Lockformer Standing “S” Cleat machine – 10 station
- Manufacturer: Lockformer
Call for Status and Pricing The Lockformer Standing “S” Cleat Roll Former | 10 Station allows you to — in one pass — form a shape that combines a conventional “S” cleat with a standing seam for greater strength a...
Lynchburg, VA
Trusted Seller
Lockformer, Mestek Lockformer Stand-alone 6016 Beader
- Manufacturer: Lockformer
Call for Status and Pricing Beading is a cost-conscious way to stiffen ductwork. It is 5 times faster than cross-braking and uses only one operator. The Lockformer 6016 Beading Roll Former was designed to meet th...
Lynchburg, VA
Roper Whitney Automax Sheet Metal Processing
- Manufacturer: Roper Whitney
- Model: Automax
Good condition Roper Whitney Automax Sheet Metal Processing. Located in USA and other countries. Click request price for more information.
USA