Used Machine Tools in Thuringia, Germany

1990 dirinler CD/PC 800 HK
- used
- Manufacturer: Dirinler
- Ram weight compensation Machine to be partially overhauled in our company in the coming year (disassembly, inspection, new paintwork, new wiring, new control cabinet)
Schmölln, Germany
1984 HYLATECHNIK HESSP 100 1.5 XA4
- used
- Manufacturer: Hylatechnik
- Fine stroke adjustment - Cutting shock damping - Oil extraction - 2 cylinders - Roll feed from Dreher, type WAV, control PMS3000 from Dreher - Soundproof booth - Machine was overhauled in 2001 and equipped with...
Schmölln, Germany
1988 HELMERDING ERH 100 B
- used
- Manufacturer: HELMERDING
Equipment: - Final drive - shaft with 3 bearings - Semi-automatic stroke adjustment - circulating oil lubrication - Hydraulic clutch - Separate hydraulics with oil cooler The machine is partially overhauled by us...
Schmölln, Germany
1990 HYDRAP HPSK-100 CNC
- used
- Manufacturer: ambold
- Ejector in the table, pressure force 40 t, stroke 100 mm - laterally movable work area guarding with BWS (light barrier) this with cycle operation - Cooling, behind the machine, accumulation water tank (beige) ...
Schmölln, Germany
BAD SALZUNGEN MHD 250/4
- used
- Manufacturer: ambold pressen- und maschinenbau
unbraked reel with pressure roller new painted Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Sheet width: 250 mm | Coil weight: 2.5 t | Inner coil diameter: 450 - 530 mm | Sh...
Schmölln, Germany
1987 GSW SCHWABE LHM 80/650
- used
- Manufacturer: Herman-Schwabe
motorized reel Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Sheet width: 150 mm | Coil weight: 80 kg | Outer coil diameter: 650 mm | Thorn height: 1000 mm | Expansion area: ...
Schmölln, Germany
1977 SMERAL LENP 40 A
- used
- Manufacturer: Šmeral Brno
- Model: LENP 40 A
- gear train - tiltable - table platen - mechan. Overload protection in the ram (break plate) - pneum. clutch
Schmölln, Germany
1978 MÜLLER CD 63.12.14
- used
- Manufacturer: Muller
- workspace enclosure with Sick light barrier - large plunger with ejector and trunnion clamping piece - foot switch - motorized depth stop in cylinder
Schmölln, Germany
KEPROMA AG DOD 40/100
- used
- Manufacturer: ambold pressen- und maschinenbau
- Demonstration model with branded overhauled control system - NC roll feed servo power with direct drive - plasma nitrided rolls - backlash free drive - strip side guide Performance data at 180 degrees - 1000 st...
Schmölln, Germany
1986 JELSINGRAD BPA 15
- used
- Manufacturer: Jelsingrad
Run only 2 years High-speed Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Pressure: 015 t | Installation height: - mm | Hubzahlen per minute: 200 - 2000 | Table surface: - mm...
Schmölln, Germany
1977 DUNKES ESPZ 63/28
- used
- Manufacturer: Dunkes
- Model: ESPZ 6328
- Draw cushion Press not safe for manual insertion work
Schmölln, Germany
1981 MÜLLER SZ 40.30.1
- used
- Manufacturer: Muller
- Model: SZ 40301
with hydr. Die cushion speeds: Rapid advance speed 240 mm / s continuously adjustable
Schmölln, Germany
WANZKE GMD I
- used
- Manufacturer: ambold pressen- und maschinenbau
- Motorized double-turn reel - newly painted Control type: conventional | Storage location: Schmölln | Freight basis: In stock | Coil weight: 2 x 0.15 t | Span area: 265 - 485 mm | Bandwidth: 200 mm | Tape streng...
Schmölln, Germany
1997 ZEULENRODA PED 100/3
- used
- Manufacturer: Zeulenroda
- Model: PED 1003
- Increased installation height - with draw cushion - converted to safe control (Pilz PLC), safe for manual insertion work on the open mold
Schmölln, Germany
Lathe GEMA
- used
- Manufacturer: Gema
1 piece lathe GEMA with various accessories, according to pictures and inspection, self-disassembly
Hausen, Germany