Used Machine Tools in British Columbia, Canada

Masteel MSH-10250

• Manufacturer: Masteel

SPECIFICATIONS maximum mild steel thickness 0.25” maximum cutting length 10’6” throat depth 5-13/16” maximum back gauge travel 36” maximum front gauge measurement 48” rake angle 1°30’ motor 15 hp machine ...

Impact Driver, Impact Wrench, Grinder, Drill, Circular Saw (Set of 6)

MIlwaukee 2853-20, 1/4" (6mm) Impact Driver Dewalt DW297, 3/4" Impact Wrench MIlwaukee 6148, 4-1/2" Angle Grinder Milwaukee 2486-20, 2" (55 mm) Die Grinder Makita DS4000, 1/2" Spade Hand Drill Dewalt DC390, 6-1/...

RNP RN-250S Stoper Drills

• Manufacturer: RNP

View Spec Sheet Below Drive: Pneumatic | Air consumption (90 psi): 4.9m³ | Standard drill size: 22mm x 108mm (0.87in x 4.25in) | Revolutions: 225 RPM | Weight: 47kgs (103 Lbs.) | Length: 1,549mm (61in) | Cylinder...

Master 241-00-2412 Jack Hammer

• Manufacturer: Master.

T Handle. 1 in. Hex Chuck. Air Operated.

Joy AL60 jackleg drills

• Manufacturer: Joy

Joy AL60 jackleg drills. Comes with air leg. 3 drills available.

Masteel MIWH-130

• Manufacturer: Masteel

OVERVIEW PUNCH STATION: Universal die block for punching of large flats, angle & channel / beam flanges Quick change punch holder, ring and adapters Swing away punch stripper with view window Punch table with sca...

Masteel MIWH-66

• Manufacturer: Masteel

OVERVIEW PUNCH STATION: Universal die block for punching of large flats, angle & channel / beam flanges Quick change punch holder, ring and adapters Swing away punch stripper with view window Punch table with sca...

Masteel MIWH-180

• Manufacturer: Masteel

OVERVIEW PUNCH STATION: Universal die block for punching of large flats, angle & channel / beam flanges Quick change punch holder, ring and adapters Swing away punch stripper with view window Punch table with sca...

Masteel MIWH-90

• Manufacturer: Masteel

OVERVIEW PUNCH STATION: Universal die block for punching of large flats, angle & channel / beam flanges Quick change punch holder, ring and adapters Swing away punch stripper with view window Punch table with sca...

Brown & Boggs Lockformer

• Manufacturer: Brown Boggs

Specifications Model 24BB 2 HP 220 V 3 Phase

Timesavers Puma 52MWT Metal Wet sander

• Manufacturer: Puma

Specifications 600 V (Transformer can by available for any voltage required) 60 A 3 Phase 3 Belts (Driven each by 30 HP Motors) Only 239 Hours

Masteel LHF-303E

• Manufacturer: Masteel

Features Rolls made of forging steel, and thru high frequency heat treatment at HRC45° Hydraulically powered lower pinch roll adjustment, with rapid gap adjustment Hydraulically powered rear bending roll adjustme...

Masteel LHF-606H

• Manufacturer: Masteel

3-Roll Plate Bending Rolls A universal machine for all plate bending jobs, and especially for the job-shop fabricator. The 3-roll, double pinch design which provides excellent pre-bending capabilities; it is ea...

STERLING 1/2 hp Beveling Machine

• Manufacturer: Sterling

Voltage: 115/230 volts | Phase: 1 | Horsepower: 1/2 hp

Masteel NCV-3000

• Manufacturer: Masteel

Request Quote on This Model Sheet size --width “y”: 1.2M/ 48 | Sheet size --length “x”: 3.2 M/ 122” | Thickness range: 0.8mm to 6mm/ 0.031 to 0.250” | Table height: 660mm/26” | Cutting speed: 10 to 20 M/ min. 400...