Used Machine Tools in Bremen, Germany

votech T2 vertical form fill and seal machine, good condition, year of construction 2005, for pellets, salt, soil, granulate, gravel, sand, grit, ...

• used

We offer a vertical form fill and seal machine in good condition from current production. Manufacturer votech, machine type T2, year of construction 2005 Machine produces PE bags continuously (throughput) and fil...

BATES :: REVITEC (FANUC) Universal robot for attaching, removing and palletizing valve bags

• used

• Manufacturer: Fanuc

We offer a quasi-new, low-maintenance and efficient robot setup for attaching, removing and palletizing valve bags; if required, including a suitable empty bag magazine and empty pallet magazine. The installation...

mondi 28.000 pieces valve bags, paper, valve 135mm, bag length 530mm, bag width 480mm, bottom height 170mm, brown, 2 layers, new

• used

• Manufacturer: Braun

From an over-order we offer 28.000 paper valve bags, availability IMMEDIATELY Manufacturer mondi valve opening 135 mm, clear width bag length 530 mm bag width 480 mm valve bottom height 165 mm stand bottom height...

Notebook EVEA

• used

2001 Perndorfer WSS4020

• used

• Manufacturer: Perndorfer

2001 Perndorfer WSS4020 waterjet cutting machine Technical data: - 4000x2000mm table - 2 frames positioned inside to hold flat iron as a cutting base, which must be replaced depending on use. - 2 high-pressure ...

2011 Tracto-Technik Tubobend 80

• used

• Manufacturer: Tracto-Technik

Model: Tubobend 80 Year of Manufacture: 2011 Type of Machine: Tube Bending Machine Condition: Used Max. Bending Length: 6,000 mm Feed System: GST - synchronized with L-guide Power Supply: 400 V / 50 Hz / 3...

Unused 150 liter pressure vessel, AISI316

• used

max. allowable working temperature: 150 °C Volume: 150 liter | Vacuum: 1,0 bar | Max. excess pressure: 6,0 bar | Specific weight of the medium: 1.4 (to/m³) | Lower bottom: torispherical bottom | Upper bottom: fla...

1813 liter pressure vessel, Aisi 316 with agitator flange

• used

• Manufacturer: Heinrich Nowak

max. allowable working temperature: 100 °C Volume: 1.813 liter | Vacuum: 1,0 bar | Max. excess pressure: 1,0 bar | Stand type: legs | Quantity legs: 4 Piece | Diameter inside: 1.195 mm | Cylindrical height: 1.260...

19000 liter storage tank, Aisi 316 with lateral agitator flange

• used

• Manufacturer: Metkon AG

notice: some residues of previous content, manhole cover plated

930 liter mobile heat-/coolable pharma processing vessel, Aisi 316

• used

• Manufacturer: Diessel

max. allowable working temperature: 130 °C max. allowable working overpressure (dj): 3.0 bar max. allowable working underpressure (dj): 1,0 bar max. allowable working temperature (dj): 130 °C Temperature control ...

247 Liter heat-/coolable pharma processing vessel, Aisi 316

• used

• Manufacturer: Seitz

max. allowable working temperature: 133 °C max. allowable working overpressure (dj): 2.0 bar max. allowable working temperature (dj): 133 °C Temperature control cylinder (dj): double jacket temperature control bo...

2245 liter heatable pressure vessel, Aisi 316 with electric plug-in heater

• used

max. allowable working temperature: 145 °C Technical documentation: drawing,German Technical Supervisory Association TÜV documents remarks: 1 electric plug-in heater (4 kW) inside the tank; height-adjustable scre...

8380 liter heatable presssure tank, Aisi 316

• used

• Manufacturer: Metkon AG

max. allowable working temperature: 200 °C Temperature control cylinder (dj): heating wire temperature control bottom (dj): heating wire remarks: External heating cables without controls; 3 support brackets, Aisi...

11100 liter tank, Aisi 316 (according to DIN 6618)

• used

• Manufacturer: Gross Apparatebau

technical equipment: level indicator (without guarantee), ball valve, crane eyes remarks: Manufactured according to DIN 6618; manhole diameter 600 mm; 2 pipes each inside the tanks

2420 liter heat-/coolable pressure vessel, Aisi 316 with inclined blade stirrer

• used

• Manufacturer: HANAG

max. allowable working temperature: 200 °C max. allowable working overpressure (dj): 16.0 bar max. allowable working underpressure (dj): 1,0 bar max. allowable working temperature (dj): 200 °C Temperature control...