New Construction in Mexico

KFD 14

Displacement up to 236" x 166" x 60" (6000 x 4200 x 1500 mm). Table size up to 236" x 134" (6000 x 3400 mm). Cast iron box-in-box frame. Extended Y travel for 5F auto machining. All linear guides for increased ri...

JY VH550

10 HP motor, infinitely variable speeds. NT-50 spindle taper. 19.7″ x 75″ hardened and ground table. Base and apron with hardened and ground square guides. Precision ACME screws on the X, Y, and Z axes. X, Y, and...

KTM 3VS

• Horsepower: 3 hp
• Gross weight: 1,270.06 kg

Motor power: 3 HP, 60–500–4200 rpm, variable speed. 9″ x 49″ hardened and ground table. T-slots. Precision hardened and ground spindles with double nuts for wear compensation. Meehanite casting with built-in cool...

WFi 50

The machine structure is designed and analyzed by CAE system for high structural rigidity. U", "V" & "Z" axes are strategically located on the upper column to improve spindle rigidity and accuracy. Panasonic AC s...

JY VH780

• Horsepower: 10 hp

10 HP motor, infinitely variable speeds. NT-50 spindle taper. 27.6″ x 102.4″ hardened and ground table. Base and apron with hardened and ground square guides. Precision ACME screws on the X, Y, and Z axes. X, Y, ...

KTM 3VSF

• Horsepower: 3 hp
• Gross weight: 1,179.34 kg

Motor power 3 HP, 50 - 4500 rpm variable speed with frequency inverter. 9″ x 49″ hardened and ground table. T-slots. Precision hardened and ground precision spindles with double nuts for wear compensation. Precis...

KLS 2280C

• Horsepower: 10 hp
• Gross weight: 3,519.87 kg

10 HP motor, 12 speeds. D1-8 Camlock, 4.1" spindle bore. Hardened and ground gears and guides. Speed change button. Mechanical clutch on the headstock. Inch dials. Centralized lubrication on the headstock. Foot b...

KLS 1440

• Horsepower: 3 hp
• Gross weight: 1,954.98 kg

Motor power: 3 HP. Gearbox (16) speeds. Push button for easy gear changes. Hardened and ground guides. Cast iron base and bed. Tray for quick chip clearance. Foot brake. Dials in inches and millimeters. 6" 3-jaw ...

W 1832SR

• Gross weight: 2,489.99 kg

Double cutting angle left 60° / right 45°. Hydraulic blade tension. Height adjusted by touch device. Variable blade speed by motor inverter. Two stroke hydraulic press. Manual screw movement. Press pressure regul...

JY VH650B

• Horsepower: 10 hp

10 HP motor, infinitely variable speeds. NT-50 spindle taper. 24″ x 87″ hardened and ground table. Base and apron with hardened and ground square guides. Precision ACME screws on the X, Y, and Z axes. X, Y, and Z...

KTM 3VK

• Horsepower: 3 hp
• Gross weight: 1,406.14 kg

Motor power 3HP, variable speed 60 - 500 - 4200 RPM on spindle. 10″ x 50″ hardened and ground table. T-slots. Precision hardened and ground precision spindles with double nut for wear compensation. Meehanite cast...

SGS-816M/MR

• Horsepower: 2 hp
• Gross weight: 798.32 kg

Working capacity: 8″ x 16″ Longitudinal movement is achieved through a linear table with guides and ball bearings. 18″ distance from the center of the spindle to the table. 8″ travel on the Y axis; ideal for mold...