- Trusted Seller
Victor 16" X 30" Lathe - 1630
- Manufacturer: Victor
- Model: 1630
W/digital Readout, Tailstock, 8" 3 Jaw Chuck, 2" Bore
$3,499 USDEuclid, OH - Trusted Seller
Monarch 14" X 16" Lathe - Ee
- Manufacturer: Monarch
- Model: EE
W/parts, Tailstock, Compound Rest, 8" 3 Jaw Chuck, 1 1/2" Bore, (3575#)66x35x65, (55#)24x19x30, *contains 2 Pieces
- Trusted Seller
Victor 18" X 12" Lathe - 618 Evs
- Manufacturer: Victor
- Model: 618EVS
W/tailstock, Compound Rest, 1" Bore, 3 1/4 Hp, Made In Taiwan
- Trusted SellerAuction
10" X 20" MONARCH MODEL EE GEARED HEAD TOOLROOM LATHE; S/N 44043, 12-1/2" SWING, 1-1/2" THRU HOLE (
- Manufacturer: Monarch
- Model: 10EE
10" X 20" MONARCH MODEL EE GEARED HEAD TOOLROOM LATHE; S/N 44043, 12-1/2" SWING, 1-1/2" THRU HOLE (APPROX.), SPEEDY COLLET CHUCK
Cincinnati, OHVisit Auction Website Clausing Colchester 15” Lathe Carriage Stop
- Manufacturer: Clausing/Colchester
- Model: 15"
Clausing Colchester 15” Lathe Carriage Stop The Clausing Colchester 15" Lathe Carriage Stop is a manual control device designed for metal lathes. This stop is specifically made for a 15-inch chuck size and has a...
$400 USDOregon, OH15 Inch Clausing Colchester Lathe Apron For 15 Inch Gap Bed Lathe
- Manufacturer: Clausing/Colchester
- Model: 15"
Clausing Colchester 15 Lathe Apron assembly this one is for a gap bed Lathe. The bronze gear does not look good the pinion moves in and out and the half nuts are gone. This is for a 15 inch Clausing Colchester, ...
$1,365 USDOregon, OH- Trusted Seller
MONARCH 10EE
- Manufacturer: Monarch
- Model: 10EE
- Spindle bore: 31.75 mm
12.5" x 20" Monarch "10EE" Toolroom Precision Engine Lathe - Mitutoyo DRO - Updated Dura "Plus" Drive - Taper Attachment - Tooling Including Collets - Collet Chuck - Chucks - Centers - Steady Rest - ETC Imperial ...
CLAUSING Colchester 15 inch METAL LATHE Quick Change Gearbox
- Manufacturer: Clausing/Colchester
- Model: 15"
CLAUSING Colchester 15 inch METAL LATHE Quick Change Gearbox Well, if you have a Clausing 15 that has a gear out in your quick change gear box this lathe just came in that has two bad gears and a bad shaft in the...
$1,750 USDOregon, OH- Trusted Seller
MONARCH EE
- Manufacturer: Monarch
- Model: EE
12.5" x 20" MONARCH "10EE" PRECISION TOOLROOM LATHE Imperial Metric Serial No 49601, Model 10EE EQUIPPED WITH: Electric Leadscrew Reverse Collet Chuck - Some Collets Aloris Tool Post - (5) Tool Holders Flame Hard...
CLAUSING Colchester 15 inch METAL LATHE Cast Iron Bed or Legs
- Manufacturer: Clausing/Colchester
- Model: 15"
Clausing Legs Both Headstock End and Tailstock End Well, if you have a Clausing 15 with a broken leg or end bracket we have a nice set here. This had a worn gearbox and was taken for a parts machine. We do have o...
$950 USDOregon, OHCLAUSING Colchester 15 INCH Lathe Chuck Buck Chuck
- Manufacturer: Clausing/Colchester
- Model: 15"
Clausing Colchester Lathe Buck Chuck that is from a 15 inch clausing colchester lathe. Nice shape. Thank you for your Business!!' Shipping will be 95.00!!
$765 USDOregon, OH15 Inch Clausing Colchester Lathe Crosslide Table
- Manufacturer: Clausing/Colchester
- Model: 15"
Clausing Colchester crossfeed table, the crosslide is in nice shape, basically with a little cleanup your in business again. This is for a 15 inch Clausing Colchester, that is the square head. A & L Industries ...
$365 USDOregon, OH15 Inch Clausing Colchester Lathe Compound Slide
- Manufacturer: Clausing/Colchester
- Model: 15"
Clausing Colchester Compound Rest. This is for a 15 inch Clausing Colchester, that is the square head. The pictures did not turn out well but we will get new ones. A & L Industries or Tooltimes2 has been on eBay...
$550 USDOregon, OH15 Inch Clausing Colchester Lathe Compound Slide
- Manufacturer: Clausing/Colchester
- Model: 15"
Clausing Colchester Compound Rest. This is for a 15 inch Clausing Colchester, that is the square head. The pictures did not turn out well but we will get new ones. A & L Industries or Tooltimes2 has been on eBay...
$550 USDOregon, OH- Trusted Seller
COLLIS 4MT DEAD CENTER
- Manufacturer: COLLIS
THIS COLLIS DEAD CENTER FEATURES A 4MT TAPER, MAKING IT SUITABLE FOR VARIOUS TOOLING NEEDS. THE OVERALL LENGTH IS APPROXIMATELY 6.0 INCHES. IT IS MANUFACTURED BY COLLIS UNDER THE MODEL NAME 4MT DEAD CENTER. - Ite...
$40 USDLouisville, KY 
Summit 30-9 Centre Lathe
- Manufacturer: Summit
- Model: 30-9
Good condition Summit 30-9 Centre Lathes manufactured in 2022. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword
