Used Processing in Hungary

Roller track counter sorting feeder BOSCH (2739)

• Manufacturer: Bosch

Manufacturer. BOSCH The track is equipped with two counters, it counts up to the set value and then changes the route of the product in the direction of the other counter,

Industrial roller, 315x50mm conveyor roller, conveyor roller /ct429p

Conveyor belt roller, 310x50mm h/w, conveyor roller Industrial PVC roller, conveyor belt roller, conveyor roller width: 315 mm /length: 325mm diameter: 50 mm bearing stub axle

driven drum motor JOKI 300X130mm 0.24kw 30m/min motorized roller

4-way air conditioner ceiling indoor unit 2.8kW 930m3/h Sanyo SPW-XDR94GXH56B /ct709a

• Manufacturer: Sanyo

Productivity when cold (kW): 2.80 Heat production (kW): 3.20 Noise level (dB): 40 Minimum noise level, dB: 38.00 Maximum noise level, dB: 42.00 Power supply (in Hz / F): 220/50 / 1 Air delivery max.: 930 m3/h Coo...

Legrand perforated cable tray 200x60x3000 mm /ct1032

• Manufacturer: Legrand

Dimensions: -Length 3030 mm -Width 200 mm -Height 60 mm Useful cross-section: 11689.44mm2 Side perforation and mounting perforation at the bottom Material thickness: 0.60 mm Surface protection: Galvanized steel tape

Protective net, anti-fall net for conveyor belt, roller track mag.40cm /ct933

• Manufacturer: Correa

height: 400mm, several 100m long. twisted, reinforced mesh with threaded steel tension wire. can be purchased as an option, can be installed on the side of the track, accompanying powder-coated steel holder, pric...

EBM Papst 4600 N axial fan 115 V/AC 148 m3/hour, 119x119x38 mm/ct1504

Manufacturer: EBM Papst Type: 4600 N Material: Metal Bearing type: Sliding bearing Speed: 2650 rpm Temperature (max.): 55 °C Temperature (min.): -10 °C Air flow: 148 m3/hour Size, length: 119 mm Size, height: 38 ...

Roller line, curved roller track 15° curved track /ct1175a

Curved roller line for sale. roller width: 300 mm total width: 395 mm outer arch length 900 mm inner arch length: 630 mm drive: chain or gravity.

flange shut-off valve ARI EURO-WEDI DN80 PN16 JL1040

Demag, Sumitomo Ergotech 3300-840 #6936

• Manufacturer: Demag
• Model: Ergotech
• Noise level: 74 dB

Demag Ergotech 330-840, Demag injection molding machine, used machine Overall dimensions : Length x Width x Height: 6.5 x 2.0 x 2.2 meters TECHNICAL DATA (BY SCREW DIAMETER) --------------------------------------...

2012 Tool-Temp TT 134 #6904

• Manufacturer: Tool Temp

Tempering Unit, Liquid Tempering Unit, Industrial Tempering Unit, Thermolator, Tool-Temp TT134, Used machine Properties: Self-control system (microprocessor) Automatic drain system Temperature monitoring and indi...

Tool-Temp TT 168 E #6906

• Manufacturer: Tool Temp

Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Properties: Self-optimizing electr...

Tool-Temp TT 168 E #6908

• Manufacturer: Tool Temp

Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Properties: Self-optimizing electr...

Tool-Temp TT 168 E #6910

• Manufacturer: Tool Temp

Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Properties: Self-optimizing electr...

RNA --- #6883

• Manufacturer: RNA

Step Conveyor, Feeding Conveyor, Used Machine Overall Dimensions: In the condition shown in the pictures!