Design stork shaker table
- Manufacturer: Stork
-Table is 40" wide and 138" long -The down spout is 12" in diameter
$4,971 USDBrant, Canada- Trusted Seller
STORK TEXWRAP MODEL T1322/2 HEAT TUNNEL
- Manufacturer: Stork
903463 One (1) Used Texwrap Heat Tunnel Model: T1322/2 Serial: 01029 1-(pre-owned) TEXWRAP # T-1322/2 SHRINK TUNNEL HIGH SPEED DUAL CHAMBER FORCED AIR TUNNEL W/ SS WIRE MESHED BELT CONVEYOR. ADJUSTABLE CONVEYOR S...
Pennsylvania, USA - Trusted Seller
70" WIDE STORK COATER & THERMO ELECTRIC DRYING LINE FOR NONWOVENS
- Manufacturer: Stork
70" Wide Stork Coating & Thermo Electric Drying Line for Nonwovens Still running Max web width: 70" Max web weight: 2 oz. per Yd square Dry coat weight: 625 oz. per Yd square Maximum speed: 150mpm Percent s...
Connecticut, USA Texwrap “Stork” T1322-01 Automatic L-Bar Sealer with T-10 Heat Tunnel | 50 Packages/Min | Shrink Wrapping System | 3/60/240V
- Manufacturer: Stork
73561001 Used Texwrap Automatic L-Bar Sealer, Model "Stork" T1322-01. Shrink system is rated for speeds up to 100 feet of film (or roughly 50 packages) per minute (depending on product and application). Has a pac...
Belvidere, IL- Trusted Seller
CIP, 1-Tank, 125 Gallon, S/st, Stork, Pump, #S742968
- Manufacturer: Stork
Stork Stainless steel CIP system, including approximatley 125 gallon stainless steel tank, stainless steel Fristam centrifugal pump driven by approximately 10 HP motor, stainless steel piping, valve clusters, etc...
New Jersey, USA 
DELAVAL STORK PV52 68608
- Manufacturer: Stork
UNUSED; CYCLE GAS COMPRESSOR;CCW ROTATION;26.88 MOL. WT.;13,150 M3/ HR CAPACITY; W/30" SIDE SUCTION & TOP DISCHARGE NOZZLES;730 K.W. MOTOR; 313 PSI ABS SUCTION @ 212 DEG F; 341 PSI @ ABS DISCH.@ 105.5 DEG C; 258...
Cleveland, TX
2000 STORK SXN 9000-8600 / 900 T
- Manufacturer: Stork
STORK 900 T injection moulding machine Clamping force : 900 T Reference : SXN 9000-8600 Year : 2000 Screw diameter : 115 mm Pressure on the material : 1600 bars Injectable volume : 5349 cm3 Injection capac...
Oyonnax, France- Trusted Seller
29,084kg per hour (29,956 LPH) Stork 4-Effect MVR Evaporator Concentrator Plant
- Manufacturer: Stork
This pre-owned Stork 4-Effect MVR Evaporator Concentrator Plant is a highly efficient system designed specifically for concentrating skim milk in dairy production. It works by using a method called Mechanical Vap...
Wolvey, United Kingdom - Trusted Seller
STORK TEXWRAP MODEL T1322/2 HEAT TUNNEL
- Manufacturer: Stork
- Trusted SellerAuction
Stork Homogeniser
- Manufacturer: Stork
Stork Homogeniser. Homogeniser(A4) Lot type: Online Auction | Inventory id: EU573384
Herne, BelgiumVisit Auction Website - Trusted SellerAuction
1981 Stork Homogeniser
- Manufacturer: Stork
Stork Homogeniser with Mixing Tank(B1) Lot type: Online Auction | Inventory id: EU573325
Herne, BelgiumVisit Auction Website - Trusted SellerAuction
Spiral Heat Exchanger
- Manufacturer: Stork
Spiral Heat Exchanger(B1) Lot type: Online Auction | Inventory id: EU573333
Herne, BelgiumVisit Auction Website - Trusted Seller
Stork SXS 2500-1450 I Injection Molding
- Manufacturer: Stork
We hereby offer this used Stork SXS 2500-1450 injection molding from 2010, located in The Netherlands. This robust machine boasts a formidable clamping force of 2500 kN, ensuring optimal performance across a wide...
- Trusted Seller
Stork 630mm Wire transfer Belt
- Manufacturer: Stork
Transfer Conveyor 630mm belt Wire mesh belt Last used for transfer in a coating line
Grimsby, United Kingdom 
2001 STORK SXN 14000-12500 - 1400 T
- Manufacturer: Stork
STORK 1400 T injection molding machine Clamping force : 1400 T Reference : SXN 14000-12500 Year : 2001 Screw diameter : 133 mm Injection pressure : 1600 bars Injectable volume : 8336 cm3 Weight of the inje...
Oyonnax, France
Tip: Enter manufacturer, model or keyword
