- Trusted Seller
70" WIDE STORK COATER & THERMO ELECTRIC DRYING LINE FOR NONWOVENS
used
- Manufacturer: Stork
70" Wide Stork Coating & Thermo Electric Drying Line for Nonwovens Still running Max web width: 70" Max web weight: 2 oz. per Yd square Dry coat weight: 625 oz. per Yd square Maximum speed: 150mpm Percent s...
Connecticut, USA - Trusted Seller
CIP, 1-Tank, 125 Gallon, S/st, Stork, Pump, #S742968
used
- Manufacturer: Stork
- Size: 125-Gallon
Stork Stainless steel CIP system, including approximatley 125 gallon stainless steel tank, stainless steel Fristam centrifugal pump driven by approximately 10 HP motor, stainless steel piping, valve clusters, etc...
New Jersey, USA - Trusted Seller
Stork 630mm Wire transfer Belt
used
- Manufacturer: Stork
Transfer Conveyor 630mm belt Wire mesh belt Last used for transfer in a coating line
Grimsby, United Kingdom - Trusted Seller
1988 Stork Sterideal
used
- Manufacturer: Stork
- Model: STERIDEAL
Stork Sterideal. UHT line, consists of Stork UHT, Tubular indirect heating, 4 sections of triple tube (tube in tube in tube), Stork holding tube and Skid with infeed tank. new Tubular heatexchanger in 2012 only u...
Lopik, Netherlands - Trusted Seller
1959 Stork DS
used
- Manufacturer: Stork
- Capacity: 2000 liters per hour
Stork DS Pre-sterilizer no: 13384 Capacity: 2000 liters per hour
Lopik, Netherlands - Trusted Seller
Stork DS 1525
used
- Manufacturer: Stork
- Capacity: 2000 liters per hour
Tubular flow sterilizer, Temperature cycles: 10-90-130/145-30-60 degrees Celcius. Including: pump, balance tank, temperature indicators. With indirect heating with steam and manual temperature control.
Lopik, Netherlands 
STORK stainless steel vibrating dryer
used
- Manufacturer: Stork
Stainless steel vibrating dryer with ventilation system. Currently used in the manufacture of sugar.
Coruche, Portugal- Trusted Seller
Stork SXS 2500-1450 I Injection Molding
used
- Manufacturer: Stork
We hereby offer this used Stork SXS 2500-1450 injection molding from 2010, located in The Netherlands. This robust machine boasts a formidable clamping force of 2500 kN, ensuring optimal performance across a wide...
- Trusted Seller
1990 Stork TPM 630 #1984
used
- Manufacturer: Stork
- Model: TPM 630
Function check without remark New wheels and welded new wheel plates Painted blower motor Directed lattice band New electric glove Belt width: 630mm
Enköping, Sweden - Trusted Seller
2010 STORK S+9000-8650
used
- Manufacturer: Stork
STORK S+9000-8650 (Yr 2010) Used Plastic Injection Molding Machine
Europe 
2000 STORK SXN 9000-8600 / 900 T
used
- Manufacturer: Stork
STORK 900 T injection moulding machine Clamping force : 900 T Reference : SXN 9000-8600 Year : 2000 Screw diameter : 115 mm Pressure on the material : 1600 bars Injectable volume : 5349 cm3 Injection capac...
Oyonnax, France
2001 STORK SXN 14000-12500 - 1400 T
used
- Manufacturer: Stork
STORK 1400 T injection molding machine Clamping force : 1400 T Reference : SXN 14000-12500 Year : 2001 Screw diameter : 133 mm Injection pressure : 1600 bars Injectable volume : 8336 cm3 Weight of the inje...
Oyonnax, France- Trusted Seller
2011 Stork S+ 6600-5650
used
- Manufacturer: Stork
Pneumatic valve - 6 pcs. Core - 1 pc. Short circuit force [kn]: 6600 | Dimensions of mounting plates (hxv) [mm]: 1370 x 1370 | Clearance between columns (hxv) [mm]: 900 x 900 | Min./ max. mold height [mm]: 300......
Wrocław, Poland - Trusted Seller
2011 Stork S+ 9000-12550
used
- Manufacturer: Stork
Pneumatic valve - 6 pcs. Core - 1 pc. Short circuit force [kn]: 9000 | Dimensions of mounting plates (hxv) [mm]: 1570 x 1560 | Clearance between columns (hxv) [mm]: 1010 x 1010 | Min./ max. mold height [mm]: 300....
Wrocław, Poland - Trusted Seller
2015 Stork S+ 6600-5650
used
- Manufacturer: Stork
Pneumatic valve - 4 pcs. Core - 1 pc. Injection system after regeneration - Cylinder, screw, screw tip new (a year ago)
Wrocław, Poland
Tip: Enter manufacturer, model or keyword