Used Processing in Germany

Water deaeration plant

• Manufacturer: Ortmann+Herbst

Three-stage water degassing system for water degassing and CO2 impregnation. The raw water enters the first degassing tank through an injector nozzle. The high flow velocity causes oxygen and nitrogen to be torn...

Laying machine with circulating belt Krauss und Reichert Kuris

• Manufacturer: Reichert

Pionier Super PC Electronic laying machine with revolving belt and unwinding device Length: 13,000 mm Belt width: 1,800 mm Total width: 2,150 mm The machine is currently still assembled and must be dismantled and...

Roller paternoster/ storage lift Eska

• Manufacturer: Eska

Height approx.: 4,300 mm Roller width: 1,600 mm Max. load: 2,800 kg dismantled/ ready for loading

Servo cutter Gerber

• Manufacturer: Gerber

Loading dimensions approx.: 3,005 x 4,900 x 1,000 mm with circulating belt (approx.: 2,550 mm belt width), OMRON Varispeed E7 vacuum system

premix plant

• Manufacturer: Falterbaum

Additional title: two component mixing plant with deareation and carbonisation | Capacity: 9600 l/h | Maximum co2 content (operating value): 8 to 8,5 g/l | Residual oxygen content (operating value): 1 to 1,5 mg/l

Velcorin dosing system

• Manufacturer: DMT

Velcorin dosing system for cold sterilization. Manufactured by DMT Service, reliable dosing to ensure microbiological safety in beverages. Ideal for integration into existing filling lines. Our team at VBW Asset...

carbonisation plant

• Manufacturer: APV

The CO2 target value is entered on the digital controller, causing the CO2 metering valve to open accordingly. The CO2 is introduced into the product stream via an injector and then dissolved and bound in the sat...

Dealcoholisation plant

• Manufacturer: APV

The dealcoholisation is carried out by a dialysis membrane module consisting of up to 8 modules connected in parallel. The mass transfer is driven by the concentration gradient between beer and dialysate (water o...

1994 Thorwesten SAM 90 NC corner cleaning machine 95609

• Manufacturer: Thorwesten

Control: Program | Single-head cleaning machine: Yes | Cnc axes: X and Y axes | Number of tools: 3 | Sash profile heights min-max mm: 100 | Turnaround station: Yes

VEN794

PFEIFFER power supply unit

• Manufacturer: Pfeiffer

Power supply unit, power supply, power supply unit PFEIFFER VACUUM OPS 070 PM 051 974 X 50 / 60 Hz used, tested !

PFEIFFER VACUUM adapter for TC 110/120

• Manufacturer: Pfeiffer

Adapter for TC 110/120 PFEIFFER VACUUM TCS 12 PM 061 638-U 4 accessory ports Fitting set New, with documentation !

VAT drive flange

Drive flange VAT, PICHLER & STROBL VAT378861 2x feed-through: Ø 54 / 40 mm, depth: 12 / 8 mm used drive flange - see S2380 ! New !