Used Machine Tools in Saxony, Germany

JFA clamping box

• Manufacturer: JOHANN FISCHER ASCHAFFENBURG

Clamping box, clamping cube, clamping angle, box angle JFA, JOHANN FISCHER ASCHAFFENBURG PRECISION TOOLS 501 x 250 x 250 mm goodness 2 all slots Ø 31 x 71 mm 2 chambers 225 x 220 x 235 mm Used!

JFA clamping box

• Manufacturer: JOHANN FISCHER ASCHAFFENBURG

Clamping box, clamping cube, clamping angle, box angle JFA, JOHANN FISCHER ASCHAFFENBURG PRECISION TOOLS 1005 x 250 x 250 mm goodness 2 all slots Ø 42 x 80 mm 3 chambers 310 x 220 x 235 mm Used!

PST 1,3

• Manufacturer: PST

3 chip containers (blue) type PST; capacity = 0.6 m³ Tipping angle approx. 45° for emptying Base frame size 1000mm x 1000mm x 180mm Sheet metal construction 8 mm thick 4 eyebolts for crane lifting

SANDVIK drill

• Manufacturer: Sandvik

Delta drills with internal cooling SANDVIK TM411.5-207632 Diameter: Ø 20.25 mm 420279019 K20 Used!

Vertical pusher Marav VFS300

Vertical shaping machine Marav (Maschinenfabrik Ravensburg AG) VFS300 used, tested !

WMW DU 250 AS

• Manufacturer: WMW

Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck

IMA Norte VS 800 470x340x120

• Manufacturer: Norte

from a BAZ IMA NORTE VS 800 - clamping plates, without eyelets T-slots to DIN 650 - a = 14mm; h = 26mm; b = 24mm; c = 11mm T-slot centerstand = 125mm - side-slot left and right = width: 20mm

1970 WMW AP 865x780x40

• Manufacturer: WMW

surface plate with 3 base stands Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 3 | Table length: 865 mm | Table width: 780 mm | Table height: 40 mm | Height over ...

1987 TOS - KURIM DU 250 AS

• Manufacturer: TOS Kuřim

Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck Ø 125 in 360° pitch circle -clamping takes place via grid with index -pitch circle 24 -chuck: Ø 125mm, with revolving ...

1985 WMW 3880x1390

• Manufacturer: WMW

distance of t-slots=250mm T-slot size: a=28mm b=50mm c=24mm h=52mm

TOS dividing head

• Manufacturer: TOS

Dividing head, dividing head, dividing table, with tailstock TOS KURIM Type DU200AN Dividing head: Holder: Inner diameter: Ø 48 mm, depth: 50 mm -10° - +100° tiltable Tailstock with quill and fixed center point u...

WMW SP 4750x1850x200

• Manufacturer: WMW

steel plate are available for sale. T-slots according to DIN 650 a=42mm; b=74mm; h=65mm distance edge to 1st T-slot = 150mm distance T-slot to T-slot=310mm

1988 Krups AP 4000x2000x460

• Manufacturer: Krups

2 pieces cast steel plates for sale free. T-slots according to DIN 650 a=40; h=56; b=74; c=28mm; center distance of T-slots = 250 mm The plates are equipped for lateral fixing.

WMW AP 510x270x65

• Manufacturer: WMW

very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 10...

WMW ALU 4200x2000

• Manufacturer: WMW

Aluminum plate with 800 clamping holes, M8; countersunk Ø 11,5 x 15mm with 4 clamping holes, M24 The plate is placed on a wooden support frame.