Used Machine Tools in Saxony, Germany

BARRY air spring

• Manufacturer: BARRY CONTROLS GmbH

Air spring, machine base BARRY CONTROLS GmbH SLM-48 Internal thread: M14 x 2.0, depth: 20 mm used, checked!

WMW service unit

• Manufacturer: WMW

Service device, machine control WMW SERVICE DEVICE III AUERBACH Fkr SRS 250/1 (AUERBACHFkrSRS250 /1) approx. 6 m connecting cable Similar to illustration! Used!

PAGUS mechanical clutch

• Manufacturer: Pagus

mechanical clutch PAGUS Hollow shaft 1: Diameter: Ø 24 mm 1 groove Hollow shaft 2: Diameter: Ø 21/25 mm 4 grooves Spare part and others. for milling machine FRITZ WERNER FV1! Used!

POREBA upper slide

• Manufacturer: Poreba

Top slide with 4-fold tool holder POREBA 4-fold steel holder, 2 pieces used !

BO323

Catch hole drilling and pinning machine WESSEL FSM 220 V 50 Hz 0.1 kVA used

Gang drilling

Row drilling machine, 4-fold BKR 20x4 AI thread cutting possible ! used, tested !

FIXATOR leveling range

• Manufacturer: Pagus

Bench leveling range for machine feet e FIXATOR 7 pieces Ø 100 mm x 1 mm, with slot 24 mm 8 pieces Ø 100 mm x 2 mm, with 24 mm slot 1 piece Ø 100 mm x 4 mm, with 24 mm slot 1 piece Ø 100 mm x 5 mm, with 24 mm slo...

angle table nicht bekannt

• Manufacturer: nicht bekannt

Angle extension table - machine table - machine clamping table with 33 x clamping holes M24 vertical mounting side: W x H: 800 x 450mm with 4 clamping grooves Ø 30 x 75mm

1989 SCHNUPP HYDRAULIK 11-38-D-31496

• Manufacturer: SCHNUPP HYDRAULIK

TRANSFER TABLE - TRANSFER TROLLEY - TOOL CHANGING SYSTEM Possible application: for press tools/devices as interchangeable trolleys in press lines

GESAU drill

• Manufacturer: Pagus

Stepped drill with internal cooling GETTING (Ø14,5x23,5 /120 ° x25x110) with internal cooling! unused!

FEIN tin snips

• Manufacturer: Fein

Sheet metal shears, high-frequency sheet metal shears, high-frequency tool, high-frequency machines FEIN QSz 838 0.24 kW 1850 strokes/min 265 V 3AC 200 Hz approx. 3.5 m connection cable used, tested!

IND-SPHINX® micro drill

• Manufacturer: Pagus

Micro drills, drills, 45 pieces IND-SPHINX® PRECISION LIMITED D5463 D5463008000850000 Ã0.80x8.50mm Other quantities on request! New!

PAGUS drill

• Manufacturer: Pagus

Twist drill RECA HSS Twist drills 29.75 - 50 mm MK Shank 29.75 /32/35/37/38/39 /39.75 /42/44/44/46/50mm 14 pieces Used!

WMW SP 5040x2230x460

• Manufacturer: WMW

Machine table can be used as clamping plate. - material - cast steel - clamping surface 4100 x 2230mm - outlet part lateral (at the side) = W: 2110 x L: 1040mm T-slots according to DIN 650 - b=54.0; c=21.0; h=55....

bolster plate AP 2500x1250x100 (Nr.1-2)

Cast steel The plates are machined before the T-slot with 75mmx60mm(recessed) Table surface 2530mm X 1245 mm Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered 8 th...