Processing » Heat Exchangers » Plate Heat Exchangers » Texas

Building Filters

145

Used Plate Heat Exchangers in Texas, USA

  • EXCHANGERS 102700

    EXCHANGERS 102700

    • Manufacturer: APV

    UNUSED; MFG. BY APV IN 2008; 1119.45 SQ. FT.; MODEL #TR9GN-M11; PLATES 0.6MM THICK; PARAFLOW TYPE;

    Cleveland, TX
  • EXCHANGERS 102618

    EXCHANGERS 102618

    • Manufacturer: APV

    MFG. BY APV IN 1998; 1.5" PLATE PACK THICKNESS; 8" WIDE X 22" LONG PLATES;

    Cleveland, TX
  • EXCHANGERS 102567

    EXCHANGERS 102567

    • Manufacturer: APV

    MFG. BY APV IN 1994; 1.5" PLATE PACK THICKNESS; 8" WIDE X 22" LONG PLATES;

    Cleveland, TX
  • EXCHANGERS 113100

    EXCHANGERS 113100

      "As Is, Where Is" Used Plate and Frame Heat Exchanger.

      Cleveland, TX
    • EXCHANGERS 107883

      EXCHANGERS 107883

        APV HEAT EXCHANGER; BUILT IN 1998; TYPE R5MGS16; Qty: 1 | Alloy: S | Sq.ft.: 464.8 | Material (s): CS FRAME | Material (t): 316SS PLATES | Psi (s): 200 | Psi (t): 200 | Temp. deg. f (s): 250 | Temp. deg. f (t): 2...

        Cleveland, TX
      • EXCHANGERS 107242

        EXCHANGERS 107242

        • Manufacturer: SUPERCHANGER

        FINISHED PRODUCT HEAT EXCHANGER; MFG. BY SUPERCHANGER IN 1998; MODEL #UX-296-HP-45;;

        Cleveland, TX
      • EXCHANGERS 112942

        EXCHANGERS 112942

          Used 18,294 Sq. Ft. vertical Plate Exchanger. Mfg. by APV in 2012. With (2)20" inlets & (2)20" outlets. Model #S280M14 Paraflow. Previous Service: GI Closed Loop CW heat Exchanger 2;

          Cleveland, TX
        • EXCHANGERS 112941

          EXCHANGERS 112941

            Used 18,294 Sq. Ft. vertical Plate Exchanger. Mfg. by APV in 2012. With (2)20" inlets & (2)20" outlets. Model #S280M14 Paraflow. Previous Service: GI Closed Loop CW heat Exchanger 1;

            Cleveland, TX
          • EXCHANGERS 113092

            EXCHANGERS 113092

              "As Is, Where Is" Used Karbate Poly Bloc Heat Exchanger Phenolic Impregnated. Model #PBC24-20PU-1-2. Built in 2016.

              Cleveland, TX
            • EXCHANGERS 113316

              EXCHANGERS 113316

                Used Approximately 400 Sq. Ft. Plate Heat Exchanger. Mfg. by APV in 2009. Model N34 M-11. .5mm Thick Plates.

                Cleveland, TX
              • EXCHANGERS 108628

                EXCHANGERS 108628

                  PREP TANK COOLER; 11.1 SQ. FT. PLATE HEAT EXCHANGER; MFG. BY ALFA LAVAL IN 2011; MODEL #TL3-PFG; NBRP GASKETS; PLATE THICKNESS .50MM;

                  Cleveland, TX
                • EXCHANGERS 114150

                  EXCHANGERS 114150

                    596 sq. ft. Plate Heat Exchanger, Mfg. by Kelvion in 2022. With 316L Stainless Steel Plates. Rated 145 psig @ 230 deg. F. Model #NF150LBA150, Plate type NF150L, 73 plates. 1mm plate thickness. NBR gasket material.

                    Cleveland, TX
                  • EXCHANGERS 114149

                    EXCHANGERS 114149

                      596 sq. ft. Plate Heat Exchanger, Mfg. by Kelvion in 2022. With 316L Stainless Steel Plates. Rated 145 psig @ 230 deg. F. Model #NF150L BYF-150, Plate type NF150L, 73 plates. 1mm plate thickness. NBR gasket mater...

                      Cleveland, TX
                    • EXCHANGERS 102476

                      EXCHANGERS 102476

                      • Manufacturer: VICARB

                      MFG. BY VICARB IN 1990; 36.6 SQM 316SS PLATE HEAT EXCHANGER; TYPE V60; DESIGN PRESSURE PROCESS SIDE 10 BAR @ 130 DEG. C.; SERVICE 4 BAR @ 130 DEG. C.; (34) 316SS PLATES; CS FRAME; 1850MM LENGTH; 700MM WIDTH; 150...

                      Cleveland, TX
                    • EXCHANGERS 113368

                      EXCHANGERS 113368

                        Used 5 sq. ft. Vertical Plate Exchanger, Mfg by Alfa Laval in 2015. .50 MM Plate Thickness, Model #TL3-PFG. EPDMP Clip On Plate Exchanger Gaskets. Previous Service: SSMB Feed Heater.

                        Cleveland, TX
                      45678

                      Overview

                      Plate heat exchangers are compact, high-efficiency units built from thin, corrugated metal plates pressed together to form parallel flow channels. They transfer heat between two fluids with tight temperature approaches, commonly used in HVAC, refrigeration, food processing and chemical plants. Available as gasketed, welded or brazed designs, they offer easy capacity changes, high turbulence for efficient transfer, and straightforward disassembly for inspection and cleaning.

                      FAQ

                      What should I check when buying a used plate heat exchanger?

                      Confirm plate material and condition, gasket integrity, design pressure/temperature, heat duty and flow rates, serial documentation, and availability of spare plates or gaskets.

                      How do I ensure safe shipping of a plate heat exchanger?

                      Drain and clean fluids, secure or brace the plate pack, protect flanges and gaskets, crate to prevent movement, label for hazardous residues and insure for transport.

                      What maintenance is required after purchase?

                      Regularly inspect gaskets and plates for leaks or corrosion, monitor pressure drop and temperatures, perform scheduled cleaning (CIP or manual), and replace worn gaskets or damaged plates.

                      How can I verify the exchanger is the right size for my system?

                      Compare required heat duty, inlet/outlet temperatures, flow rates and allowable pressure drop with the exchanger’s rated performance or request a thermal calculation from the seller.