Used Heat Exchangers in New Jersey, USA

Stainless Steel Austenitic K.Ley Shell and Tube Heat Exchanger - IPP# 219810

• Manufacturer: K.Ley

Heads: Without heads Pressure tubeside: -1/6 bar @ 300 deg C (203 liter) Pressure shell: -1/6 bar @ 300 deg C (310 liter) with expansion joint

Shell and Tube Heat Exchanger 25 m² (269 ft²) Graphite - IPP# 211553

• Manufacturer: VICARB

Tubeside: -1/5 bar @ 200 degrees C (204 liter) Shell: -1/10 bar @ 200 degrees C (350 liter) Tube dimensions: (118) 22/32mm diameter x 2733 long

Plate and Frame Heat Exchanger 9.3 m² (100 ft²) - IPP# 216324

Chilled water service Size unknown, insulated

Kapp stainless steel 316 studded welded plate Heat Exchanger - IPP# 246426

• Manufacturer: Kapp

Additional Info:

Block Heat Exchanger 1.86 m² (20 ft²) Graphite - IPP# 94491

cylindrical block

Block Heat Exchanger 3 m² (32.3 ft²) Graphite - IPP# 89733

• Manufacturer: Carbone

Additional Info:

Graphite Ralph Coidan CBD-400/20 Block Heat Exchanger - IPP# 706205

• Manufacturer: Ralph Coidan

Additional Info:

Block Heat Exchanger 8 m² (86.1 ft²) Graphite - IPP# 706430

• Manufacturer: Vicarb

cylindrical design pressure process side 2.1 bar @ 15 to 120 deg C service 5.3 bar @ 155 deg C 7-pass on process side, 6-pass service side (2- pass per block, 3-blocks)

Hastelloy C22 Calorifier Shell and Tube Heat Exchanger - IPP# 247267

Stainless Steel 316L Shell and Tube Heat Exchanger - IPP# 229451

Duty: 1.41 MW

Stainless Steel 316L Shell and Tube Heat Exchanger - IPP# 246071

• Manufacturer: Ward Tank Co

Note: the NB Papers report this unit to be vertical, however it is set to be in the horizontal position. (AS)

Stainless Steel 316L Shell and Tube Heat Exchanger - IPP# 241133

• Manufacturer: Enerquip LLC

Stainless Steel 316L Shell and Tube Heat Exchanger - IPP# 245568

• Manufacturer: RAS Process Equipment

Hastelloy - Clad Albach Cembell Shell and Tube Heat Exchanger - IPP# 206106

• Manufacturer: Albach

w/ haastelloy C22 clad "U" stamped baffle spacing 2'0", four baffles

Inconel LJE Brunner Corp. Shell and Tube Heat Exchanger - IPP# 201615

• Manufacturer: Brunner

steel shell and heads tube : 0.65"BWG