Used Heat Exchangers in New Jersey, USA

Stainless Steel 316 Shell and Tube Heat Exchanger - IPP# 222554

• Manufacturer: Manning & Lewis

Job number: 261880 Bolted dished top head, bolted cone bottom head Expansion joint in shell

Stainless Steel 304 Shell and Tube Heat Exchanger - IPP# 109022

condenser 1' NPT vent/drain

Hastelloy - C276 Shell and Tube Heat Exchanger - IPP# 245521

• Manufacturer: Cosmos Metalurgical (Camarillo CA)

Carbon Steel Alfa Laval Spiral Heat Exchanger - IPP# 201674

• Manufacturer: Alfa-Laval

Additional Info:

Stainless Steel Oostndorp Shell and Tube Heat Exchanger - IPP# 221545

• Manufacturer: Oostndorp

design pressure tube side 7 bar @ -15/+235 deg C, shell side -1/5.3 bar @ -15/+135 deg C, (2) c/steel dished head Duplex (SAF-2205) tubes

Stainless Steel 316 Shell and Tube Heat Exchanger - IPP# 207019

• Manufacturer: Yula

MDMT is 40 psi @ 190 Degrees F for the shell and 40 @ 150 Degrees F.

Stainless Steel 304 Shell and Tube Heat Exchanger - IPP# 216127

• Manufacturer: Graham

Flash condenser for a column condenser (IPP # 216020) Duty: 2,957,440 BTU/hr.

Heat Exchanger Shell and Tube Stainless Steel 304 - IPP# 216085

• Manufacturer: Graham

Cooling water lines: two 8" lines. 2 pass design

Stainless Steel 304 Plate and Frame Heat Exchanger - IPP# 245829

• Manufacturer: Alfa Laval

carbon steel pressure plates and frame,

Hastelloy - C276 Plate and Frame Heat Exchanger - IPP# 201585

• Manufacturer: VICARB

Process sidde rated 45 PSI @ -30/+122 degrees F. Service side rated 30 PSI @ -30/+122 degrees F.

Stainless Steel 304 Plate and Frame Heat Exchanger - IPP# 81090

• Manufacturer: Paterson Kelly

304SS plates Max working pressure 100 psi @ 200 deg F

Stainless Steel 316 Plate and Frame Heat Exchanger - IPP# 233721

• Manufacturer: APV

316 SS plates with CS frame, rated for 199585 lbs./hr. water and 210539 lbs./hr. glycol.

Stainless Steel 316 Plate and Frame Heat Exchanger - IPP# 232711

• Manufacturer: APV /Hebeler

Minimal design metal temp.=-20 degrees F at 200 psi.

Stainless Steel Austenitic Air Fin Heat Exchanger - IPP# 222358

• Manufacturer: Balke Durr

fin fan overhead cooler design pressure 3.2 bar @ 135 degrees C working pressure 1 bar @ 60 degrees C fins are 54mm diameter (2) appox 46.5 m3/second type LPVT 4 ventilator fans mounted underneath 2500mm diameter

Stainless Steel 304 Shell and Tube Heat Exchanger - IPP# 246073

• Manufacturer: Atlas Industrial

Tema Type BEM size 48-240 Vacuum Condenser