Used Processing in New Jersey, USA

Bagger Packaging - IPP# 220746

• Manufacturer: Packaging Systems International, Inc

Single spout with adjustable seat. Controls by Flexweigh Corp. Model DWM-4.

Mixer-Twin Shell & Double Cone 2.8 m3 (100 ft3) Stainless Steel 304 - IPP# 108282

• Manufacturer: Patterson Kelly

blender Maximum density 55 lbs/cubic feet. Shell 48" outer diameter Blender rotation 11 rpm, liquid/solids intensifier bar rotation 1174 rpm 1750 rpm output spped, with belt and drive with protective guard. Inten...

Mixer-Twin Shell & Double Cone 0.57 m3 (20 ft3) Stainless Steel 304 - IPP# 205898

• Manufacturer: Patterson Kelly

shell "V" blender with Intensifier Bar rated 75 Lbs/CuFt Designed for dry blending (2) 18" charge ports with covers, 8" discharge port with manual butterfly valve.

Stainless Steel 304 Paul O Abbe RVB 36 Mixer-Twin Shell & Double Cone - IPP# 216377

• Manufacturer: Paul O. Abbe

twin shell blender 36" shell diameter with 18" manway diameter with air operated butterfly valve Electrical requirements are 230/460, 3 ph, 60 hz

Stainless Steel 304 Patterson Kelly Mixer-Twin Shell & Double Cone - IPP# 216387

• Manufacturer: Kelly

twin shell blender 90 lbs. cu.ft. maximum density shell diameter is 24", manway diameter is 17 & 3/4" with a air operated butterfly valve Electrical requirement is 208/230/460 volts, 3 ph, 60 hz. With brake

Mixer-Ribbon & Paddle 0.99 m3 (35 ft3) Stainless Steel 316 - IPP# 39335

• Manufacturer: Babcock & Wilcox

ribbon mixer Ends of trough unbolt for ribbon removal. Packing glands on shaft. w/Holroyd gear reducer btm discharge with gate valve.

Mixer-Ribbon & Paddle 8.5 m3 (300 ft3) Carbon Steel - IPP# 203129

Jacketed, Carbon steel body and Jacket, 316 SS Clad internal(contact) Single Ribbon Mixer. with CS jacket. Packing glands on shaft, Chain drive with by approximately 30 HP motor and reducer.

Mixer-Ribbon & Paddle 0.42 m3 (15 ft3) Stainless Steel 316 - IPP# 107553

• Manufacturer: Koppers

Unit has twin 2 1/2" diameter shafts with adjustable paddles. Packing glands on shafts. Has 2-section bolt on cover with 10" x 10" feed port, 12" x 16" with loose cover. 26" x 18" bottom discharge. 5 HP, 3/60/230...

Mixer-Ribbon & Paddle 0.1 m3 (3.5 ft3) Stainless Steel 316 - IPP# 704157

• Manufacturer: Babcock & Wilcox

"L" Series ribbon blender Features: hinged lid, removable endplate, interrupted ribbon, external bearings, packing glands 220/250/380/440 volt 69.3 rpm Unit with a built-in on/off switch. Openings: inlet 18" x 9"...

Mixer-Ribbon & Paddle 0.5 m3 (17.7 ft3) Stainless Steel 316 - IPP# 701967

• Manufacturer: Babcock & Wilcox

paddle mixer 36 rpm. paddle speed.Packed glands. Unit has bottom discharge with manual valve.

Stainless Steel 304 Loedige Littleford Ploughshare KM8000 Mixer-Ribbon & Paddle - IPP# 213607

• Manufacturer: Littleford

continuous mixing 25,000 kg/hr 8000 liter(2113 gallon) total capacity with (2) side hatches with hinged covers and hand wheel swing bolts, (1) 16" x 24" ID top drive end charge port, (1) 16" ID vent port top cent...

Stainless Steel 321 SCHICHAU-GRIEP DS 160 Mixer-Ribbon & Paddle - IPP# 208406

• Manufacturer: SCHICHAU-GRIEP

ribbon mixers with cylindircal housing, ribbon agitator stuffing box weight motor 660 kg, inlet and outlet filters

Stainless Steel 304 Vrieco Nauta 150RB-5 Mixer-Nauta - IPP# 205955

• Manufacturer: Nauta

Vrieco Nauta orbital screw mixer 15 PSIG @ 275 degrees F internal ASME Code stamped Internals have a 180 grit polished finish. All Welds ground smooth, and screw is also polished with a 180 grit finish With 30HP ...

Mixer-Nauta 8,000 L (2,113 gallons) Stainless Steel 316 - IPP# 211836

• Manufacturer: Nauta

order #M-16668, bolt flat top, screw and orbital arm both driven from the top, orbital arm driven by 2.2 kw, 3/50/220/380 volt, 1450 rpm motor 316 s/steel (1.4401) screw 350mm diameter x 4526mm long, 270mm screw ...

Mixer-Nauta 10,000 L (2,642 gallons) Stainless Steel 316 - IPP# 705252

• Manufacturer: Nauta

truncated cone mixer 3080mm top diameter x 2440mm high cone section with 1800mm diameter truncated cone bottom Max speed 20 rpm 316 stainless steel twin helical agitator on single shaft. serial #21084086/1 20-710...