Used Processing in New Jersey, USA

Blower 22,118 m3/h (13,018 CFM) Carbon Steel - IPP# 206782

• Manufacturer: Fuller Co.

Sutorbilt Positive Displacement Rotary type liquid sealed vacuum pump/blower, Series 3200W. 158 BHP With splash oil lubrication system.

Blower 22,118 m3/h (13,018 CFM) Carbon Steel - IPP# 206775

• Manufacturer: Fuller Co.

Sutorbilt Positive Displacement Rotary type liquid sealed vacuum pump/blower, Series 3200W. 158 BHP With splash oil lubrication system

Blower 22,118 m3/h (13,018 CFM) Carbon Steel - IPP# 206774

• Manufacturer: Fuller Co.

Sutorbilt Positive Displacement Rotary type liquid sealed vacuum pump/blower Series 3200W 158 BHP With splash oil lubrication system.

Blower 2,520 m3/h (1,483 CFM) Stainless Steel - IPP# 212704

• Manufacturer: Hansa

Centrifugal Fan

Blower 1,359 m3/h (800 CFM) - IPP# 219236

• Manufacturer: Aerzener Maschinenfabrik GmbH-Germany

(GG20) cast steel Rotary blower only p1 1,0 bar,p2 0,5 bar openings: (2) DN200 without motor

Bin 117 m3 (4,132 ft3) Carbon Steel - IPP# 245807

fully insulated and cladd, handrail around top,

Stainless Steel 316 Hopper Bin - IPP# 706736

IBC fork liftable hopper, weld flat top, weld coned bottom (off center) openings top: 1-420mm with hinge, bottom: 1-250mm with valve

Bin 1 m3 (35.3 ft3) Stainless Steel 304 - IPP# 225279

fork liftable product tote bin

Bin 0.002 m3 (0.08 ft3) Stainless Steel 304 - IPP# 225310

• Manufacturer: K-Tron

clamped flat top, weld coned bottom agitator driven by 5 HP, 3/50/230 volt, 1750 rpm motor via SEW-Eurodrive gearbox, right angled design drive, 304 stainless steel gate type agitator, bottom outlet with a screw ...

Bin 0.011 m3 (0.39 ft3) Stainless Steel 304 - IPP# 225308

• Manufacturer: K-Tron

agitated weigh feed hopper clamped flat top, weld coned bottom agitator driven by approximately a 1 HP, 3/50/230 volt, 1715 rpm motor via 195:1 ratio SEW-Eurodrive gearbox, right angled design drive, 304 stainles...

Bin 0.4 m3 (14.2 ft3) Stainless Steel 304 - IPP# 225307

• Manufacturer: K-Tron

agitated weigh feed hopper, clamped flat top, weld coned bottom, agitator driven by 1 HP, 3/50/230 volt, 1715 rpm motor via 195:1 ratio SEW-Eurodrive gearbox, right angled design drive, 304 stainless steel gate t...

Bin 0.1 m3 (3.5 ft3) Stainless Steel 321 - IPP# 219087

• Manufacturer: Freidrich Gruber GmbH

pressure 0,9 bar @ 250 deg C, volume 100 liter weld dished top and bottom openings top: 1-210mm, 2-12mm, bottom: 1-100mm,

Bin 38 m3 (1,342 ft3) Stainless Steel - IPP# 219814

• Manufacturer: Glatt

working pressure: 0,04 bar@ 20°C, weld slight coned top, weld coned bottom, openings top: manway 500 mm, (1) DN 100, (2) DN 250, (1) DN 200, openings sidewall: (1) DN 100, openings cone section: (1)bottom outlet ...

Escher Wyss REA 1600 Steam Turbine - IPP# 600172

• Manufacturer: Escher Wyss

50 Cycle, steam turbine generator set, with extraction. Extraction 1: non controlled 2800 kg/h max, Extraction 2: controlled 27000 kg/h, pressure: 11-14 kp/cm² ( 156-199 psi) with 7.150 PS MAAG gearbox, 6614/3000...

Siemens EG-400-2 Steam Turbine - IPP# 701561

• Manufacturer: Siemens

Single cylinder extraction backpressure of Axial flow type extraction steam 205 psi (14.2 bar), Steam consumption 130 ton/hr.