Machine Tools » Stamping Presses

Building Filters

123

Used frames

  • Trusted Seller
    50 TON AMADA “TP45EX” OPEN

    50 TON AMADA “TP45EX” OPEN BACK GAP FRAME PRESS

    • Manufacturer: Amada
    • Model: TP-45EX

    50 TON AMADA “TP45EX” OPEN BACK GAP FRAME PRESS - 50 to 100 spm variable speed - 2.75" stroke - 14.5" shut height - overload protection - Fujishoko "NC600" NC roll feeder Imperial Metric 50 TON AMADA “TP45EX” OPE...

    $24,500 USD

    Get financing

    Est. $461/mo

    Cincinnati, OH
  • Trusted Seller
    2000 Amada TPL 80SI Single

    2000 Amada TPL 80SI Single Crank Gap Frame Press - LMC #51544

    • Manufacturer: Amada
    • Model: TPL-80

    Year Built - 2000 SPECIFICATIONS: EQUIPPED WITH: Link Drive Operator T-Stand w/Palm Buttons Air Counterbalance Wet Type Clutch & Brake Motorzied Shut Height Adjustment T-Slotted Bolster & Slide Leveling Pads *Pre...

    Lincolnshire, IL
  • 1985 Niagara E-90 OBI Single

    1985 Niagara E-90 OBI Single Point Gap Frame Press #17944

    • Manufacturer: Niagara
    • Model: E-90

    Niagara E-90 OBI Single Point Gap Frame Press MODEL E90 CAPACITY | 90 TONS STROKE | 9″ SHUT HEIGHT | 18″ SDAU ADJUSTMENT | 4.5″ BED AREA | 39″ L-R X 25″ F-B RAM AREA | 27.5″ L-R X 20″ F-B X 2″ H SPM | 45 BOLSTER ...

    Nashville, TN
  • 1984 Niagara E-150 OBI Single

    1984 Niagara E-150 OBI Single Point Gap Frame Press #17946

    • Manufacturer: Niagara
    • Model: E-150

    Niagara E-150 OBI Single Point Gap Frame Press MODEL E-150 CAPACITY | 150 TONS STROKE | 10″ SHUT HEIGHT | 26″ SDAU ADJUSTMENT | 6″ BED AREA | 50″ L-R X 30″ F-B RAM AREA | 34″ L-R X 24″ F-B X 2.5″ H SPM | 27 BOLST...

    Nashville, TN
  • 1985 Niagara E-90-S OBS Single

    1985 Niagara E-90-S OBS Single Point Gap Frame Press #17945

    • Manufacturer: Niagara

    Niagara E-90 OBS Single Point Gap Frame Press MODEL E90 CAPACITY | 90 TONS STROKE | 9″ SHUT HEIGHT | 18″ SDAU ADJUSTMENT | 4.5″ BED AREA | 39″ L-R X 25″ F-B RAM AREA | 27.5″ L-R X 20″ F-B X 2″ H SPM | 46 BOLSTER ...

    Nashville, TN
  • Komatsu H2W Solid Frame Servo

    Komatsu H2W Solid Frame Servo Press

    • Manufacturer: Komatsu

    H2W Solid Frame Servo-Driven Press The H2W Solid Frame Servo-driven Press Designed for Superior Flexibility and Accuracy Ideal for progressive, transfer or manual die operations Incorporates modern, state of t...

    United States
  • Komatsu OBS Gap Frame Small

    Komatsu OBS Gap Frame Small Single Point Press

    • Manufacturer: Komatsu

    OBS Gap Frame Small Single Point Mechanical Press Komatsu OBS60 With capacities from 39 to 220 tons, each Komatsu gap press comes with all the standard features you expect in a world-class press. Plunger guided ...

    United States
  • Komatsu OBS Gap Frame Large

    Komatsu OBS Gap Frame Large Single Point Press

    • Manufacturer: Komatsu

    OBS Gap Frame Large Single Point Mechanical Press With capacities from 35 to 220 tons, each Komatsu gap press comes with all the standard features you expect in a world-class press. Plunger guided slide guarante...

    United States
  • Trusted Seller
    100 ton Niagara 36"x30" Used

    100 ton Niagara 36"x30" Used Stamping Press

    • Manufacturer: Niagara

    Bed area: 36"x30" | Capacity: 100 ton | Equipped with: Helm PLC based operator interface, Helm four point Tonnage Monitoring, Air Clutch And Brake, Air Counterbalances, Tie Rod Frame, Light Curtains, T-slotted B...

    Detroit, MI
  • Trusted Seller
    275 ton Stamtec 2pt. Gap

    275 ton Stamtec 2pt. Gap Frame Stamping Press

    • Manufacturer: Stamtec

    Tonnage: 275 US ton | Bed area: 106.38"x35.46" | Side area: 82.74"x27.58" | Stroke: 11.08" | Shut height (over bolster): 21.67" | Adjustment: 4.73" | Strokes per minute: 20-35

    North America
  • Trusted Seller
    88T Amada TPL 80SI #51544

    88T Amada TPL 80SI #51544

    • Manufacturer: Amada
    • Model: TPL-80

    Year Built – 2000 SPECIFICATIONS: EQUIPPED WITH: Link Drive Operator T-Stand w/Palm Buttons Air Counterbalance Wet Type Clutch & Brake Motorzied Shut Height Adjustment T-Slotted Bolster & Slide Leveling Pads *Pre...

    Lincolnshire, IL
  • Trusted Seller
    2000 AMADA TPL80SI

    2000 AMADA TPL80SI

    • Manufacturer: Amada
    • Model: TPL-80

    Amada TPL80SI Single Point, Link Drive, Gap Frame Press 80 Ton Amada TPL80SI, 5.1" Stroke, 17.9" Shut Height, 50-95 SPM, 40.5" x 23.6" Bolster Area, 21.7” x 17.7” Slide Area, 3.2” Slide Adjustment, Wet Type Clutc...

    Elk Grove Village, IL
  • Auction
    Dake 7-105

    Dake 7-105

    • Manufacturer: Dake

    Lot 115 Dake 7-105 75 Ton Hand Operated Hydraulic H-Frame Press Equipped With 44-1/4" Between Uprights, 3000 PSI

    Blaine, MN
    Visit Auction Website
  • Pacific 750 Ton Hydraulic Press

    Pacific 750 Ton Hydraulic Press #87363

    • Manufacturer: Pacific

    Used Pacific 750 Ton Hydraulic Press Capacity Maximum Capacity 750 tons Punching Capacity 500 tons Bed, Stroke & Daylight Bed Size 48″ × 102″ Distance Between Side Frames 108″ Stroke 12″ Shut Height (Open) 20...

    Nashville, TN
  • Trusted Seller
    Good Brands C-Frame Stamping Presses

    Good Brands C-Frame Stamping Presses

    • Manufacturer: Good Brands

    In stock Balconi Benelli Cavenaghi e Ridolfi Colombo Copress Cotelli Galdabini Galato Gigant Ims IMV Manzoni Mios Mossini Omet Oti Pressix Radaelli Ross Sangiacomo Zani ......... -

    Thiene, Italy
12345

Overview

Stamping presses are essential for manufacturing operations, designed to shape or cut metal and other materials using a die. They are widely used in various industries, including automotive, aerospace, and appliance manufacturing, to produce components with high precision and efficiency. Stamping presses come in different types, such as mechanical, hydraulic, and servo-driven, each offering unique advantages depending on the production needs.

FAQ

What factors should I consider when buying a used stamping press?

Consider the press's tonnage capacity, die space, stroke length, and overall condition. Check for any signs of wear or damage and review the maintenance history.

How can I ensure safe shipping of a stamping press?

Hire a professional machinery mover with experience in transporting heavy equipment. Ensure the press is properly secured and protected during transit to prevent any damage.

What are the maintenance requirements for a stamping press?

Regular maintenance includes checking and lubricating moving parts, inspecting dies and tooling, and ensuring electrical and hydraulic systems are functioning correctly. Follow the manufacturer's maintenance schedule for specific guidelines.