Used Stamco in Ohio, USA

40,000 Lb. x 60″ COMEQ STAMCO Recoiler #3608

• Manufacturer: Stamco

3608 COMEQ STAMCO 49″ to Top of Mandrel Hydraulic Strip Clamp Hydraulic Push Off Pneumatic Overarm Separator, 53″ Length Our inventory is always changing. Contact us for help finding the machinery you need. We of...

3/16" STAMCO SCRAP BALLER

• Manufacturer: Stamco

3/16" STAMCO SCRAP BALLER MANUFACTURER - STAMCO TYPE - SCRAP BALLER YEAR - 2002 MAX THICKNESS - 3/16" @ 50,000 PSI SPEED - 98 - 520 FPM ASSEMBLY - LEFT HAND ASSEMBLY

36" x .187" x 20,000# STAMCO SLITTING LINE

• Manufacturer: Stamco

Make: Stamco Material Width: 36" Gauge: .015" - .187" Weight Capacity: 20000Lbs Coil ID: 16"-20 / 16" - 24" Coil OD: 62" Direction: Left to Right Mandrel Uncoiler Powered Hold - Down Roll 4-Leaf Mandrel Design H...

Stamco Scrap Baller

• Manufacturer: Stamco

86" x 10,000# STAMCO PACKAGING LINE COMPONENTS

• Manufacturer: Stamco

MANUFACTURER - STAMCO YEAR - 1982 CAPACITY - 10,000# COILD ID - 20" COIL OD - 30" - 86" CONVEYOR SPEED - 30 FPM LINE COMPONENTS: 10,000# STATIONARY DOWNENDER APPROXIMATELY 8' STORAGE CONVEYOR W/ SCALE APPR...

60" Stamco Mandrel Uncoiler

• Manufacturer: Stamco

60" X .135" X 40,000LB STAMCO LOOP SLITTING LINE

• Manufacturer: Stamco

Make: Stamco Material Width: 12" - 60" Material Thickness: 010" - .135" (stainless), .190" (aluminum) Coil ID: 20" Coil OD: 72" Direction: Right to Left Coil Pro Entry 4-Arm Turnstile Powered Rotation C-Ho...

72" OD x 10,000 LBS STAMCO BANDING LINE

• Manufacturer: Stamco

SPECIFICATIONS: MANUFACTURER: STAMCO OD CAPACITY: 72" WEIGHT CAPACITY: 10,000 LBS. LINE INCLUDES: 4-ARM TURNSTILE PICK-N-PLACE DOWNLAYER CONVEYOR -6' SECTION, DRIVEN BANKDING STATION -MANUAL BANDING TOOL STAC...

77" x .500" STAMCO HIGH SPEED DOWNCUT SHEAR

• Manufacturer: Stamco

77" x .500" Stamco High Speed Downcut Shear (Used) Manufacturer: Stamco Width Capacity: 77" Gauge Range: .071" - .500" Line Direction: Left to Right

70" x 40,000# COMEQ STAMCO RECOILER

• Manufacturer: Stamco

1650MM (65") X 2MM STAMCO TENSION LEVELING LINE

• Manufacturer: Stamco

1650MM (65") X 2MM STAMCO TENSION LEVELING LINE (1992) 27.6" (700MM) X 65" (1650MM) MANUFACTURER: STAMCO USA 1992 REVAMPED BY SIMGE 2022 READY FOR INSTALL TECHNICAL SPECIFICATIONS: WIDTH: 700MM - 1650MM MAX/MIN ...

72" x 60,000# Stamco Pit Type Coil Car

• Manufacturer: Stamco

7" X .140" STAMCO SCRAP CHOPPER SET OF 2

• Manufacturer: Stamco
• Maximum thickness: 3,556 mm

SET OF (2) 7" x .140" STAMCO SCRAP CHOPPERS Max Thickness Capacity: .140" Equipped with incoming entry guides Require drive motors

72" x .126" STAMCO ROTARY DRAG BOARD TENSION STAND

• Manufacturer: Stamco

Width: 72 inches EQUIPPED WITH Rotary Drag Board Tension Stand with Exit Crop Shear Wichita Water Cooled Brake 75" Face on Rolls Quick Change Roll Design Separator Shafts for Strip

60" X .187" X 40,000# BRANER TURRET SLITTING LINE w/ 72" X 10K STAMCO PACKAGING

• Manufacturer: Stamco
• Maximum thickness: 0.3 mm

Manufacturer - Braner Type - Turret Head Slitting Line Year of Manufacture - 1993 Material - Low Carbon, HRPO, Cold Rolled Bare, Galvanized, Coated Max Coil Weight - 40,000# Coil Width - 62" Strip Thickness ...