Semiconductors » Surface Treatment / Cleaning » Spin Rinse Dryers (SRD) » California

Building Filters

29

Used Spin Rinse Dryers (Srd) in California, USA

Trusted Seller
Process Chamber for ST-240 Semitool SRD
- Manufacturer: Semitool
- Model: ST-240
This Process Chamber has a 200mm / 8″ Bowl opening and is designed to run substrates up to 100mm / 4″. This Chamber size fits the Semitool & Rhetech ST-240 Spin Rinse Dryer. The Bowl (also called the Process Cham...
Rocklin, CA
Trusted Seller
Umbilical Cord for the PSC-101 Controller on SITEK & Semitool SRDs
- Manufacturer: Semitool
- Model: PSC-101
Umbilical Cord for the PSC-101 on S/F-Model Spin Rinse Dryer Controllers. This Cable connects the back of the Controller to the top of the SRD Head Assembly. SITEK Part Numbers: 06-00544 06-00545
Rocklin, CA
Trusted Seller
Umbilical Cord for the PSC-102 Controller on SITEK & Semitool SRDs
- Manufacturer: Semitool
- Model: PSC-102
Umbilical Cord for the PSC-102 Spin Rinse Dryer Controllers. This Cable connects the back of the Controller to the top of the SRD Head Assembly. 4.5ft length SITEK Part Numbers: 06-01865 06-01866
Rocklin, CA
Trusted Seller
PSC-102 Controller for F-Model Semitool SRDs
- Manufacturer: Semitool
- Model: PSC-102
PSC-102 SRD Controller designed for F-Model Semitool & Rhetech Spin Rinse Dryers. Programmable Settings Displays Resistivity and Spin Speed Compatibility: Exclusively for F-Model Semitool & Rhetech SRDs, not inte...
Rocklin, CA
Trusted Seller
PSC-101 Controller for F-Model Semitool SRDs
- Manufacturer: Semitool
- Model: PSC-101
PSC-101 SRD Controller designed for F-Model Semitool & Rhetech Spin Rinse Dryers. Programmable Settings Displays Resistivity and Spin Speed Compatibility: Exclusively for F-Model Semitool & Rhetech SRDs, not inte...
Rocklin, CA
Trusted Seller
PSC-101 Controller for S-Model Semitool SRDs
- Manufacturer: Semitool
- Model: PSC-101
PSC-101 SRD Controller designed for S-Model Semitool & Rhetech Spin Rinse Dryers. Programmable Settings Displays Resistivity and Spin Speed Compatibility: Exclusively for S-Model Semitool & Rhetech SRDs, not inte...
Rocklin, CA
Trusted Seller
Semitool 840 Spin Rinse Dryer (SRD)
- Manufacturer: Semitool
- Model: SRD-840
The Semitool 840 SRD is a Doublestack Spin Rinse Dryer (SRD) with 2 Process Chambers, fully refurbished to ‘Like New’ condition. Two redundant Head Assemblies ensure Uninterrupted Operation, allowing you to perfo...
Rocklin, CA
Trusted Seller
Semitool 870 Spin Rinse Dryer (SRD)
- Manufacturer: Semitool
- Model: SRD-870
The Semitool 870 SRD is a Doublestack Spin Rinse Dryer (SRD) with 2 Process Chambers, fully refurbished to ‘Like New’ condition. Two redundant Head Assemblies ensure Uninterrupted Operation, allowing you to perfo...
Rocklin, CA
Trusted Seller
Semitool 440 Spin Rinse Dryer (SRD)
- Manufacturer: Semitool
- Model: SRD-440
The Semitool 440 SRD is a Standalone Spin Rinse Dryer (SRD) on a Wheeled Base, fully refurbished to ‘Like New’ condition. The freestanding design allows for maximum mobility and potential storage space below the ...
Rocklin, CA
Trusted Seller
Semitool 270 Spin Rinse Dryer (SRD)
- Manufacturer: Semitool
- Model: SRD-270
The Semitool 270 SRD is a highly modular Tabletop Spin Rinse Dryer (SRD), fully refurbished to ‘Like New’ condition. Designed to rinse Semiconductor Substrates with DI water and using hot nitrogen gas and centrif...
Rocklin, CA
Trusted Seller
Semitool 240 Spin Rinse Dryer (SRD)
- Manufacturer: Semitool
- Model: SRD-240
The Semitool 240 SRD is a highly modular Tabletop Spin Rinse Dryer (SRD), fully refurbished to ‘Like New’ condition. Designed to rinse Semiconductor Substrates with DI water and using hot nitrogen gas and centrif...
Rocklin, CA
Trusted Seller
Semitool 260 Spin Rinse Dryer (SRD)
- Manufacturer: Semitool
- Model: SRD-260
The Semitool 260 SRD is a highly modular Tabletop Spin Rinse Dryer (SRD), fully refurbished to ‘Like New’ condition. Designed to rinse Semiconductor Substrates with DI water and using hot nitrogen gas and centrif...
Rocklin, CA
Trusted Seller
Power Switch for Semitool PSC-101 Controller
- Manufacturer: Semitool
- Model: PSC-101
This power on/off switch is used on Semitool PSC-101 controllers and serves as the main power breaker for the unit. SITEK Part Number: 06-00411 Alternative Part Numbers: 73170-01 13-113101
Rocklin, CA
Trusted Seller
Process Chamber for ST-270 Semitool SRD
- Manufacturer: Semitool
- Model: ST-270
This Process Chamber has a 290mm / 11.5″ Bowl opening and is designed to run substrates up to 150mm / 6″. This Chamber size fits the Semitool & Rhetech ST-270 Spin Rinse Dryer. The Bowl (also called the Process C...
Rocklin, CA
Trusted Seller
PSC-102 Controller for S-Model Semitool SRDs
- Manufacturer: Semitool
- Model: PSC-102
PSC-102 SRD Controller designed for S-Model Semitool & Rhetech Spin Rinse Dryers. Programmable Settings Displays Resistivity and Spin Speed Compatibility: Exclusively for S-Model Semitool & Rhetech SRDs, not inte...
Rocklin, CA

12

Overview

Spin Rinse Dryers (SRD) are compact, high-throughput units used to rinse and rapidly dry parts after wet cleaning. They spin parts while spraying deionized water or solvents and apply high-speed rotation plus heated or vacuum-assisted drying to remove residual fluid and particles. SRDs are common in surface treatment, semiconductor, medical, and precision manufacturing where fast, repeatable, particle-free drying is required.

FAQ

What should I inspect when buying a used SRD?

Check rotor and chuck condition, seals, bearings and motor hours. Verify control electronics, cycle recipes, rinse plumbing and drain integrity. Look for corrosion, contamination, and maintenance records. Confirm spare parts availability and compatibility with your fixtures.

How do I prepare and ship an SRD safely?

Drain all fluids, secure rotating parts, lock the rotor and protect fragile sensors. Crate the unit on a pallet, brace internal components, and mark lifting points. Use a carrier experienced with lab or industrial equipment, insure the load, and include export or hazardous-material paperwork if solvents were used.

What regular maintenance does an SRD need?

Perform routine cleaning of the chamber and nozzles, replace seals and filters, inspect bearings and motor coupling, and service vacuum or heated drying systems. Calibrate sensors and cycle controls periodically and follow the manufacturer's maintenance schedule.