Machine Tools » Presses » C-Frame Presses » Michigan

Building Filters

21

Used C Frame Presses in Michigan, USA

S1095 Hydraulic C-Frame Press
The Lomar S1095 Hydraulic C-Frame Press is a versatile machine designed for industrial applications where durability and dependability are essential. Designed for production applications such as; die set crimpin...
Horton, MI
Servo C- Frame Presses
The Lomar S1210 Servo C-Frame Press is a versatile utility press designed for a variety industrial applications where durability, flexibility and dependability are essential.Servo designed for production applicat...
Horton, MI
C-FRAME HYDRAULIC UP ACTING PRESS 13" DLO
- Manufacturer: FISHER DYNAMICS
PRELIMINARY SPECIFICATIONS FISHER DYNAMICS C-FRAME PRESS UP ACTING TABLE 13" DAYLIGHT OPENING 16" THROAT 11" X 9" BASE PLATE 2 HP MOTOR AVAILABLE FOR INSPECTION
Detroit, MI
20 TON RA HYDRAULIC C-FRAME PRESS 18" LR x 16" FB BA
PRELIMINARY SPECIFICATIONS RA MACHINES HYDRAULICS PRESS (NEW CONTROLS IN 2011) 20 TON CAPACITY 18" LR X 16" FB BED AREA 16" THROAT OPERATOR PALM CONTROLS VIT VEUGEN INTEGRATED TECHNOLOGIES CONTROLS NEW 2011 15 HP...
Detroit, MI
DENISON NA50C96D03 SPECIAL
- Manufacturer: Denison
- Model: NA50C96D03 SPECIAL
PRELIMINARY SPECIFICATIONS DENISON HYDRAULIC C-FRAME PRESS MODEL NA50C96D03 SPECIAL 50 TON CAPACITY 15" STROKE 32" OPEN DAYLIGHT 12" THROAT DEPTH 31.50" LR X 21" FB BED AREA OPERATOR PALM BUTTONS T-SLOTTED BOLSTE...
Detroit, MI
FISHER DYNAMICS AJF-7
- Manufacturer: FISHER DYNAMICS
PRELIMINARY SPECIFICATIONS FISHER DYNAMICS Lot of Estimated 40 TON 4 POST UP ACTING HYDRAULIC PRESSES (10) 4 POST HYDRAULIC PRESSES (1) C-Frame Press Up Acting MOTOR HYDRAULIC TANK OVERALL DIMENSIONS APPROX. 40" ...
Detroit, MI
1988 NEFF C FRAME OPEN BACK
- Manufacturer: Neff
PRELIMINARY SPECIFICATIONS NEFF C-FRAME HYDRAULIC DOWN ACTING PRESS OPEN BACK FRAME S/N P8839 25 TON CAPACITY 6" STROKE 12" DAYLIGHT 8" THROAT 22.5" LR X 12.5" FB BED AREA 4.40" X 6" CUT OUT BOTTOM BOLSTER MOTOR,...
Detroit, MI
1994 NEFF C-FRAME OPEN BACK
- Manufacturer: Neff
PRELIMINARY SPECIFICATIONS NEFF C-FRAME HYDRAULIC DOWN ACTING PRESS OPEN BACK FRAME S/N P9800 25 TON CAPACITY 6" STROKE 12" DAYLIGHT 8" THROAT 23.5" LR X 12.5" FB BED AREA 4.40" X 6" CUT OUT BOTTOM BOLSTER 19.5" ...
Detroit, MI
1997 NEFF D12-5M
- Manufacturer: Neff
- Model: D12-5M
PRELIMINARY SPECIFICATIONS; NEFF HYDRAULIC C-FRAME PRESS MODEL D12-5M Year 1997 12 TON CAPACITY 0-7" STROKE 18" DAYLIGHT OPENING 7" THROAT 3.25" RAM DIAMETER 30" FROM FLOOR TO BED 10" X 21" RAM 30" DIAMETER ROTAR...
Detroit, MI
1987 NEFF C-FRAME
- Manufacturer: Neff
- Model: C-FRAME
PRELIMINARY SPECIFICATIONS NEFF C-FRAME HYDRAULIC DOWN ACTING PRESS OPEN BACK FRAME S/N P8764 40 TON CAPACITY 6" STROKE 12" DAYLIGHT 8" THROAT 22.5" LR X 12.5" FB BED AREA 4.40" X 6" CUT OUT BOTTOM BOLSTER MOTOR,...
Detroit, MI
50T 25″X24, 30″ DAYLIGHT, 18″ STROKE, WABASH, C-FRAME
- Manufacturer: Wabash
MODEL C50-2424-2TMACX. SERIAL #7994-12. 4” CLEARANCE BEHIND BED AND SLIDE. 12” BORE CLAMP CYLINDER WITH 8” ROD AND 18” STROKE. APPROX 30” MAX DAYLIGHT. APPROX 37” OPERATOR HEIGHT. GUIDED WITH CLAMP CYLINDER AND A...
Grand Rapids, MI
90T 108”X48”, 72” DL.,36” STR.,C-FRAME, BOOKING
CINCINNATI. NEW APPROX 1980. BED AND SLIDE BOTH BOOK/TILT APPROX 45 DEGREES. THREE DOUBLE-ACTING CLAMP CYLINDERS: 6” BORE; 2.5” ROD; 1.25” PORTS. APPROX 72” DAYLIGHT; 36” STROKE AND 36” OPERATOR HEIGHT. FULLY GUI...
Grand Rapids, MI
125T 108”X48”,90”DL., 54”STR., C-FRAME
CINCINNATI. NEW APPROX 1987. BED AND SLIDE BOTH BOOK/TILT APPROX 45 DEGREES. THREE DOUBLE- ACTING CLAMP CYLINDERS: 7” BORE; 4” ROD; 2” FOUR BOLT FLANGE. APPROX. 90” DAYLIGHT; 54” STROKE AND 36” OPERATOR HEIGHT. F...
Grand Rapids, MI
125T 108”X48”,90”DL., 54”STR., C-FRAME
CINCINNATI. NEW APPROX 1987. BED AND SLIDE BOTH BOOK/TILT APPROX 45 DEGREES. THREE DOUBLE- ACTING CLAMP CYLINDERS: 7” BORE; 4” ROD; 2” FOUR BOLT FLANGE. APPROX. 90” DAYLIGHT; 54” STROKE AND 36” OPERATOR HEIGHT. F...
Grand Rapids, MI
18T 17.5’X16″. 12.5″ DL, 6″ STR, 35 G TANK, C-FRAME, BENCH-TOP
MOVING BOLSTER IS APPROX 17.5” X 16”. BED AREA IS APPROX 18” X 14”. PARKER 4” BORE DOUBLE-ACTING CYLINDER WITH A 2” DIAMETER ROD; 6” MAX STROKE AND RATED TO 3000 PSI (J2HKUS14C). MAX DAYLIGHT IS APPROX 12.5”. FUL...
Grand Rapids, MI

12

Overview

C-Frame presses, also known as gap frame presses, are versatile and robust machines used in various manufacturing processes such as stamping, bending, and forming. Their unique C-shaped frame allows for easy access to the working area, making them ideal for tasks requiring frequent die changes and adjustments. These presses are commonly used in automotive, aerospace, and metalworking industries.

FAQ

What should I consider when buying a used C-Frame press?

Check the press's overall condition, age, and capacity. Look for any signs of wear, especially on the frame and moving parts. Verify the machine's maintenance history and ensure it meets your specific requirements.

How can I safely ship a C-Frame press?

Use a reputable heavy machinery transport service. Ensure the machine is properly secured and protected during transit. Disassemble any removable parts if necessary to prevent damage.

What maintenance does a C-Frame press require?

Regular maintenance includes lubricating moving parts, checking hydraulic fluid levels, and inspecting for wear and tear. Follow the manufacturer's guidelines for detailed maintenance procedures and intervals.