Used in Overijssel, Netherlands

Mould cart

• Manufacturer: Dupatech

Dupatech has developed a tool cart that enables you to easily place and remove moulds from our thermoforming machines. The cart has an hydraulic lift and is fitted with a mechanical locking systems for safety. Us...

Moulds

Extended conveyor and elevator

• Manufacturer: Dupatech

Especially designed for companies that want to install an in-line granulator. Our fully automatic elevator and extended conveyor transport the finished products to the packing staff. The elevator is fully synchro...

Pre-heater

• Manufacturer: Dupatech

When forming polypropylene (PP), we recommend using a pre-heater as this will lead to higher quality end products and higher outputs. Our pre-heater is a four roller model that has been designed for uniform heati...

Robot

• Manufacturer: Dupatech

Our three-axis, servo-driven gantry robot is designed for high precision and high speed (A-B) stacking. The controls of the robot are integrated into the machine control panel. Using this robot will increase flex...

Grinders

• Manufacturer: DUPATECH

The DUPATECH waste material Grinder is the perfect machine to handle all of your regrind material. No manufacturing process is perfect. You will always have scrap, over-runs or products that are just not up to yo...

Grundfos Circulation pumps

• Manufacturer: Grundfos

2 Grundfos circulation pumps, type: (2x) CRIE10-6 A-CA-A-E-HQQE, model: A99071463P31911, 50/60 Hz, 4 kW, capacity: 12.1 m³ per hour, dimensions: 1000 mm x 800 mm x 950 mm. Lot location: D...

Dupatech DP90-4

• Manufacturer: Dupatech

Maximum mold size: 920 x 720 mm | Maximum forming area: 870 x 670 mm | Forming height above material: 150 mm | Forming height below material: 160 mm | Maximum sheet width: 970 mm | Sheet thickness: 0.1 - 1.8 mm ...

Dupatech DP90-3

• Manufacturer: Dupatech

Maximum mold size: 920 x 720 mm | Maximum forming area: 870 x 670 mm | Forming height above material: 150 mm | Forming height below material: 160 mm | Maximum sheet width: 970 mm | Sheet thickness: 0.1 - 1.8 mm ...

Dupatech DP70-3 XL

• Manufacturer: Dupatech

Maximum mold size: 700 x 585 mm | Maximum forming area: 650 x 535 mm | Forming height above sheet: 100 mm | Forming height below sheet: 130 mm | Maximum sheet width: 760 mm | Forming station closing force: 40000...

Dupatech DP70-4

• Manufacturer: Dupatech

Maximum mold size: 700 x 500 mm | Maximum forming area: 650 x 450 mm | Forming height above material: 100 mm | Forming height below material: 130 mm | Maximum sheet width: 760 mm | Sheet thickness: 0.1 - 1.5 mm ...

Dupatech DP70-3

• Manufacturer: Dupatech

Maximum mold size: 700 x 500 mm | Maximum forming area: 650 x 450 mm | Forming height above material: 100 mm max. | Forming height below material: 130 mm max. | Maximum sheet width: 760 mm | Sheet thickness: 0.1...

1999 Polytype BDM 350

• Manufacturer: Polytype

Colours: 6 | Maximum output/hour: 21000 | Minimum cup diameter: 55mm | Maximum cup diameter: 130 mm | Minimum cup height: 35 mm | Maximum cup height: 115 mm

2007 Kase K908

• Manufacturer: Kase

Colours: 9 | Maximum output/hour: 30000 | Maximum cup/pail diameter: 203 mm | Maximum cup/pail height: 355 mm | Maximum print height: 235 mm

2006 Desco DSP6

• Manufacturer: Desco

Colours: 6 | Maximum diameter: 350 mm | Maximum pail height: 460 mm | Maximum print height: 350 mm