Used Injection Molding in North Carolina, USA

Floor platform i-DF5000B1X

Floor platform i-DF5000B1X

LUMINA 500HE Structural Foam Injection Molding Machine

Force - 500 Tons Platen Size - 96 x 90 inches Tie Bar Spacing – 52 x 62 inches Open Daylight – 84 inches Stroke – 72 inches Closed Daylight – 12 inches Nozzle Positions – 166 Extruder – 6" diameter, 30:1 Accumula...

LUMINA 2400H Structural Foam Injection Molding Machine

Force - 500 Tons Platen Size - 70 x 80 inches Tie Bar Spacing – 52 x 62 inches Open Daylight – 84 inches Stroke – 72 inches Closed Daylight – 12 inches Nozzle Positions – 72 Extruder – 4.5" diameter, 30:1 Accumul...

Wilmington LUMINA General Purpose SeriesLUMINA Pallateer SeriesLUMINA Medium Pressure Series

• Manufacturer: Wilmington

(Shown Above: LUMINA MP800R) NEW! Designed to fill the gap between high- and low-pressure injection molding machines, LUMINA MP800 is a hybrid medium-pressure model with a hydraulic press and an electric extruder...

Wilmington LUMINA General Purpose Series

• Manufacturer: Wilmington

(Shown Above: LUMINA LP1000) Since 1972, Features and Advantages Robust construction optimized through comprehensive FEA analysis 5-cylinder clamp construction for superior force distribution Advanced accumulator...

Wilmington LUMINA General Purpose SeriesLUMINA Pallateer Series

• Manufacturer: Wilmington

(Shown Above: LUMINA Model 500HE) Since 1975, The LUMINA Pallateer is the latest of The pallets produced are of all types – one way nestable, single deck, double deck, rackable, etc. Most importantly, the pallets...

2008 Engel Insert 200H/55

• Manufacturer: Engel
• Model: Insert

- Vertical clamp - Horizontal Injection Unit - 39" rotary table

2002 Sumitomo SE50D C110

• Manufacturer: Sumitomo
• Model: SE50D

Voltage: 230V 3 phase | Shot size: 2.2 oz. | Tie bar spacing: 14.17" x 12.2" | Screw: 28m | Injection force: 25,310 psi | Min mold height: 6.29" | Max mold height: 13.77" | Daylight: 23.62" | Ejector stroke: 2.7...

2021 Haitian ZEIII 4500/3350

• Manufacturer: Haitian

Equipped with: - Core pull - Robot interface - Air blast

1999 Nissei PS40E2A

• Manufacturer: Nissei
• Model: PS40E2A

Voltage: 460V | Shot size: 0.6 oz. | Clamping force: 44 US Ton | Tie bar spacing: 12.2" x 12.2" | Controller: NC9300T | Screw diameter: 19mm | Platen size: 17.7" x 17.7" | Machine dimensions: 112" x 36" x 69" | ...

1998 Nissei PS40E5A

• Manufacturer: Nissei
• Model: PS40E5A

Voltage: 460V | Shot size: 1.9 oz. | Clamping force: 44 US Ton | Tie bar spacing: 12.2" x 12.2" | Controller: NC9300T | Screw diameter: 30 mm | Platen size: 17.7" x 17.7" | Machine dimensions: 112" x 36" x 69" |...

2007 Nissei NEX110-9E

• Manufacturer: Nissei
• Model: NEX110-9E

Voltage: 460V | Shot size: 3 oz. | Clamping force: 121 US Ton | Tie bar spacing: 16.5" x 16.5" | Controller: TACT | Screw diameter: 32 mm | Platen dimensions: 23.9" x 23.9" | Clamp stroke: 13.8" | Daylight min/m...

2006 Nissei FN280-100A

• Manufacturer: Nissei

**New Screw and Barrel will be installed prior to shipment.** 63mm / 26.6 oz 71mm / 33.8 oz 80 mm / 42.9 oz

2014 Engel e-mac 440/195

• Manufacturer: Engel
• Model: E-MAC 440195

Used for testing only. No production. Voltage: 460V | Shot size: 5.58 oz. | Clamping force: 195 US Ton | Tie bar spacing: 22.4" x 22.4" | Platen size: 31.9" x 31.9" | Min/max mold height: 7.9" / 17.7" | Ejector s...