Used Heat Exchangers in Canada

Used Paul Mueller Heat Exchanger, Tube & Shell, Full Vacuum

• Manufacturer: Paul Mueller

-manufacturer: paul mueller (2007) -serial no. 357150-17 -national board no. 42994 -shell side mawp: 125 psi @ 600 deg.f -tube side mawp: 150 psi @ 400 deg.f -rated full vacuum -u tube design, stainless ste...

Used Meco Heat Exchanger, Tube & Shell, Stainless Steel

• Manufacturer: Meco

-manufacturer: meco -number of tubes : 56, 85.75'' long, 0.25'' diameter -tube inlet & outlet: 1'' -shell inlet & outlet: 1.25''

Used Alfa Laval Contherm Scraped Surface Heat Exchanger

• Manufacturer: Alfa-Laval
• Model: CONTHERM 6X6

-manufacturer: alfa laval -model: contherm 6x6 -serial no. hc7446ncc -shell interior dimensions: 6'' diameter x 72'' long -product chamber mawp: 300 psi @ 300 degf. -media chamber mawp: 250 psi @ 300 deg.f ...

Used Tranter Plate Heat Exchanger, 161.5 Sq. Ft.

• Manufacturer: Tranter

-manufacturer: tranter, superchanger -model: ux 226 uj 42 -inlet & outlet: 4" -working pressure:125 psi @ 212 deg.f. -national board no. 36693 -crn no. d3827.6 -serial no. sb 773 -stainless steel plates -...

THERMAL TRANSFER PRODUCTS A0-35

• Manufacturer: THERMAL TRANSFER PRODUCTS

THERMAL TRANSFER PRODUCTS, A0-35, HEAT EXCHANGER, 575 VAC, 300 PSI WITH (2) BROOK, 30 HP, MOTORS AND (2) BRUENINGHAUS HYDROMATIK, 1,800 RPM PUMP, S/N 02400347

SAHARA SAH200 / Ground Heater HX200 Fan Coil Heat Exchanger

SAHARA commercial radiator Model SAH200 / Ground Heater HX200. Usually used to heat the fluid (glycol) circulating in the hoses for example to thaw the ground, cure the concrete... Works on standard 120V. Integra...

2005 HATEBUR AMP20S

• Manufacturer: HATEBUR

Equipped With * Induction Heater ( w Inverter) Mitsubishi Electrics Type HW-13 * Bar Feeding System with 32' Rack * Air Chiller for Heater ( RUA-SP3322) Toshiba Electrics * Plate Heat Exchanger (LX-195A-TNP-37) N...

Heating Tunnel With Two Leister Hotwind S, 3700W Heating System

• Manufacturer: Leister

Heat tunnel with 2x Leister heating system ideal for shrink neck banding and sleeving. 34in long tunnel, 9in wide x 4in high tunnel clearance, each Leister model Hotwind S with 230V 50/60hz 3700W, and 550L/min. I...

Microfluidics M-210B-EH

• Manufacturer: Microfluidics

This microfluidizer is all stainless steel. The heat exchanger is 500 psi shell, 150 psi tubes, 250°F temperature. It has a hydraulic fluid pump and reservoir, pressure control and gauge, prime / relief valve. Un...

Enerquip sanitary shell and tube heat exchanger #65744

• Manufacturer: Enerquip

Enerquip sanitary shell and tube heat exchanger Year 2016. Certified by Enerquip LLC. Connection Types: Connection TypesSanitary Tri-Clamp (Standard), NPT Threaded, ANSI Flanged. Finished : Sanitary Food-Grade, ...