Used Processing in Hamburg, Germany

2020 Matec 10-
- Manufacturer: Matec
Complete water treatment system with 10 filter plates Was not used after installation, in mint condition Filter plate size 800 x 800 mm Siemens control system Thickener Various pumps Dimensions +/- 3000 x 1650 mm...
Hamburg, Germany
2003 BAVELLONI Egar 315-4 Ts-
- Manufacturer: Bavelloni
- Model: Egar
CNC machining center Interpolated axis 4 KW 9.6 X-axis mm. 2,730 Y-axis mm. 1,620 Software Cad Cam Easycad Steep taper ISO 40 Tool magazine positions 19 Voltage V.400 Hz 50 More used machines at: www.janssen-used...
Hamburg, Germany
2006 PELLEGRINI POLYWIRE 5.9 - Nr.1
- Manufacturer: Pellegrini
- Model: Polywire
Multiwire with 9 diamond wires Rated power: 37/50 kW Voltage: 380 V – 50 Hz Cutting dimensions: 2,100 mm (height) x 3,500 mm (length) Wire length: 24,500/25,400 mm Wire thickness: max. 8.3 mm Water consumption: 7...
Hamburg, Germany
2019 PTM Pieropan Telaio-
- Manufacturer: Pieropan
Special gang saw Usable cutting length: 3500 mm Usable cutting height: 2200 mm Usable cutting width: 300 mm Maximum number of saw blades: No. 4 (or No. 5 with tension reduced by 20% for a total of 36 tons) Saw bl...
Hamburg, Germany
2005 Dr. Kronenberger -
- Manufacturer: Dr. Kronenberger
Complete water treatment including all pumps Pre-clarification tank Septic tank 1 new sludge container of approx. 5m³, the fine metal grid in the container works like a coffee filter, the water runs out the botto...
Hamburg, Germany
2009 Omag Blade NC 700-
- Manufacturer: Omag
CNC bridge saw with 5-axis head 1st bridge: 5-axis saw 2nd bridge: Vacuum suction cup for unloading Saw blade diameter 700 mm Y-axis approx. 15,000 mm X-axis 4,000 mm Z-axis 300 mm Underfloor saw NUM CNC control ...
Hamburg, Germany
2010 Prussiani Champion 60-
- Manufacturer: Prussiani
- Model: Champion
CNC 5-axis monoblock bridge saw with vacuum lifting system Vacuum lifter for automatic loading Tilt table X-axis 3,500 mm Y-axis 2,200 mm Z-axis 300 mm 5-axis head from 0° to 90° CAD/CAM software Wcam2k More used...
Hamburg, Germany
1997 Pedrini M 589 GR-
- Manufacturer: Pedrini
Block cutter Engine, rated power – 210 kW. 56 vertical discs (cutting thickness 12 mm) Min. disc, d: 1000 mm Max. disc, d: 1300 mm Shaft D: 180 mm; shaft length: 1000 mm Diameter of the horizontal cutting disc – ...
Hamburg, Germany
1992 Pedrini M 580 GR-
- Manufacturer: Pedrini
Block cutter - SCALETTA Motor, rated power – 190 kW. 32 vertical discs (cutting thickness 12 mm) Min. disc, d: 1000 mm Max. disc, d: 1600 mm Shaft D: 110 mm; shaft length: 600 mm Diameter of the horizontal disc –...
Hamburg, Germany
1995 Pedrini M 580 GR-
- Manufacturer: Pedrini
Block cutter - SCALETTA Motor, rated power – 190 kW. 32 vertical discs (cutting thickness 12 mm) Min. disc, d: 1000 mm Max. disc, d: 1600 mm Shaft D: 110 mm; shaft length: 600 mm Diameter of the horizontal disc –...
Hamburg, Germany
2007 GMM Litox 38-
- Manufacturer: GMM
- Model: Litox 38
CNC bridge saw with 5-axis head Saw blade diameter ø 825 mm Tilt table Main motor power 30 HP Variable speed drive (inverter) Tilt head (5 axes) from 0° to 90° Complete with automatic programs such as single cuts...
Hamburg, Germany
2011 BRETON SMART-CUT S/NC 800
- Manufacturer: Breton
- Model: Smart Cut
Bridge saw with interpolating axes. Rotating head and fixed work table. Suction cup pick-and-place system. Latest generation SIEMENS NC. Rotating head with ± 190° rotation around axis "C" and 0° to 90° rotation a...
Hamburg, Germany
2002 SIMEC NT2/2M-
- Manufacturer: Simec
Block Cutter Maximum input block size: 2,300 x 3,400 x 2,100 mm Maximum number of vertical saws: 2 Maximum vertical saw blade diameter: 1,700 mm Minimum vertical saw blade diameter: 1,000 mm Maximum horizontal sa...
Hamburg, Germany
PELLEGRINI DF2500-
- Manufacturer: Pellegrini
- Model: DF2500
Wire saw - Refurbished with 6 months warranty. Installation and training can be carried out at extra cost. - Diameter of drive wheels 2500 mm - Maximum dimensions of the block 4.0 x 2.4 m - Motorized block carria...
Hamburg, Germany
2011 Montresor Lola 1000 8+6 DX-
- Manufacturer: Montresor
- Model: Lola 1000
Edge polishing machine Belt running direction: RIGHT to LEFT 8 face grinding supports 130 & 150 mm with vertical oscillation 3 upper / 3 lower chamfering supports, first chamfering support at the bottom Diamond c...
Hamburg, Germany