1993 Emmegi Sirio 2
- Manufacturer: Emmegi
Max. sawing length: 5000 mm Max. saw blade diameter: 450 mm Automatic positioning of length and angle (90° or 45°) Moving roller conveyor material support Minimum quantity spray device
2005 Pressta Eisele Primus 300
- Manufacturer: Eisele
- Model: PRIMUS 300
Maximum cutter diameter: 300 mm Manual milling feed Angle stop infinitely adjustable with locking points Max. release depth: 110 mm Max. profile height: 190 mm Max. cutter package height: 95 mm Pneumatic ma...
$4,624 USDGütersloh, Germany
2009 Pressta Eisele Sägeanlage V-Cut
- Manufacturer: Eisele
Sawing system for aluminum with 2 saw motors that independently perform a 45° cut. Material feed unit with up to 8,100 mm Cross conveyor, storage table, chip conveyor and extraction Soundproof cabin Control v...
- Trusted SellerSan Giovanni al Natisone, Italy
1996 Elumatec DG 79
- Manufacturer: Elumatec
- Model: DG79
Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Automatic positioning of the saw unit via E 255 control Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spra...
1992 Emmegi Norma VIS
- Manufacturer: Emmegi
- Model: NORMA VIS
Max. cutting length: 5,000 mm Max. saw blade diameter: 400 mm Digital length display Minimum quantity spray device Pneumatic material clamps Miter cuts possible on both sides 2-hand operation
1998 Rotox KF 347
- Manufacturer: Rotox
- Model: KF 347
Rotatable support table between 0° and 180°, allowing 3-sided processing in one clamping 12,000 revolutions per minute 4 pneumatically controllable copy pens Pneumatic material clamping Minimum quantity spray...
1999 Elumatec Ema 201 /AMS 200
- Manufacturer: Elumatec
Automatic feed via Elgo control E 255 For attachment to any Elumatec single-head saw (right) Max. feed length: 4500 mm
1997 Elumatec DG 244
- Manufacturer: Elumatec
- Model: DG244
Max. sawing length: 6,000 mm Smallest cutting length: 335 mm Max. saw blade diameter: 550 mm Automatic length positioning via E 255 control Swivel inside and outside 22.5° - 90° - 140° Tilt angles between 45...
1999 Emmegi Twin Electra Sun TU 5
- Manufacturer: Emmegi
Max. sawing length: 5,000 mm Max. saw blade diameter: 500 mm Automatic positioning of the length as well as motorized angle adjustment inwards and outwards Moving roller conveyor Material support Minimum qua...
2001 Rotox KF 347
- Manufacturer: Rotox
- Model: KF 347
Rotatable support table between 0° and 180°, allowing 3-sided processing in one clamping 12,000 revolutions per minute 4 pneumatically controllable copy pens Pneumatic material clamping Minimum quantity spray...
1993 Pressta Eisele AKF
- Manufacturer: Eisele
- Model: AKF
Cutter diameter: 300 mm Max. notching width: 350 mm Max. release depth: 110 mm Max. profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic workpiece clamps Minimum quantity spray...
$3,794 USDGütersloh, Germany
Ruchser RU-4
- Manufacturer: Ruchser
- Model: RU
Assembly table tiltable via foot switch with pneumatic cylinder Rotation can be locked with foot brake Support surface with felt Dimensions basic dimensions: 1500 x 1400 mm, 3100 mm swung out Weight: approx. ...
$2,253 USDGütersloh, Germany
1994 Elumatec MMS 200
- Manufacturer: Elumatec
- Model: MMS 200
Manual length adjustment via handwheel with digital display For attachment to any Elumatec single-head saw (right) Max. feed length: 4,500 mm Pneumatic parking brake
$2,253 USDGütersloh, Germany
1993 Wegoma KF 228
- Manufacturer: Wegoma
Milling depth: 110mm Milling spindle speed: 12000 rpm Max. milling path: 290 x 120mm Diameter of copy pin: 5mm and 8mm Compressed air connection: 6-8 bar Weight: 200kg
$2,134 USDGütersloh, Germany
Tip: Enter manufacturer, model or keyword
