Used Edgebanders

Trusted Seller
Holz-her Edgebander
- used
- Manufacturer: Holz-Her
26a, 78", Made In Austria Name: Edgebander | Arrival date: 09-05-2025 | Dimensions l x w x h (inches): 126 x 51 x 70 | Capacity: 1.1 KW | Electrical: 3/60/230 | Weight (lb.): 1490 | Available quantity: 1 | Make y...
$1,299 USD
Euclid, OH
Trusted Seller
2006 Fravol "A16/S" Contour Edgebander
- used
- Manufacturer: Fravol
- Model: A16S
Fravol "A16/S" Contour Edgebander 38" x 44" table Front-mounted support arm with rollers 32" diameter edgebanding feed table Overhead hold down and powered roller Glue pot with application roller Foot pedal opera...
Tiffin, OH
Trusted Seller
1998 IMA "Combia" Double Sided Edgebander
- used
- Manufacturer: IMA
IMA "Combia" Double Sided Edgebander Top and bottom milling prior to edgebanding Glue applicator with pressure roller End trim Top and bottom tilting trimmers Top & bottom buffing
Tiffin, OH
Trusted Seller
1998 IMA "Combia" Double Sided Edgebander
- used
- Manufacturer: IMA
IMA "Combia" Double Sided Edgebander Top and bottom milling prior to edgebanding Glue applicator with pressure roller End trim Top and bottom tilting trimmers Top & bottom buffing
Tiffin, OH
Trusted Seller
2005 Fravol "A16/S" Contour Edgebander
- used
- Manufacturer: Fravol
- Model: A16S
Fravol "A16/S" Contour Edgebander 38" x 44" table Front-mounted support arm with rollers 32" diameter edgebanding feed table Overhead hold down and powered roller Glue pot with application roller Foot pedal opera...
Tiffin, OH
Trusted Seller
2006 Fravol "A16/S" Contour Edgebander
- used
- Manufacturer: Fravol
- Model: A16S
Fravol "A16/S" Contour Edgebander 38" x 44" table Front-mounted support arm with rollers 32" diameter edgebanding feed table Overhead hold down and powered roller Glue pot with application roller Foot pedal opera...
Tiffin, OH
Trusted Seller
2004 Homag "Optimal KL 79/E2" Edgebander
- used
- Manufacturer: Homag
- Model: KL
Homag "Optimal KL 79/E2" Edgebander 2 motor pre milling Glue station with pressure roller 2 motor end trim Top & Bottom trimming Corner rounding Top & Bottom buffing Multi roll edgebanding cart
Tiffin, OH
Trusted Seller
2005 Homag "KAL/5/A20/S2" Edgebander
- used
- Manufacturer: Homag
- Model: KAL
Homag "KAL/5 /A20/S2" Edgebander Equipment spec's: 0.4 - 20 mm Edge thickness cap., min. panel width 55 mm for panel thickness 12 - 22 mm & under; 100 mm for panel thickness over 22 - 60 mm.
Tiffin, OH
Trusted Seller
1999 Homag "Optimat KL 73/A3" Edgebander
- used
- Manufacturer: Homag
- Model: Optimat
Homag "Optimat KL 73/A3" Edgebander 0.3 - 3 mm Edge thickness cap., min. panel width 55 mm; max. panel thickness 55 mm; Feed speed variable up to 18 to 24 MPM (59' to 78' FPM). Hot Melt Glue System with reversibl...
Tiffin, OH
Trusted Seller
1999 Homag "Optimat KL 73/A3" Edgebander
- used
- Manufacturer: Homag
- Model: Optimat
Homag "Optimat KL 73/A3" Edgebander 0.3 - 3 mm Edge thickness cap., min. panel width 55 mm; max. panel thickness 55 mm; Feed speed variable up to 18 to 24 MPM (59' to 78' FPM). Hot Melt Glue System with reversibl...
Tiffin, OH
Trusted Seller
1999 Homag "Optimat KL 73/A3" Edgebander
- used
- Manufacturer: Homag
- Model: Optimat
Homag "Optimat KL 73/A3" Edgebander 0.3 - 3 mm Edge thickness cap., min. panel width 55 mm; max. panel thickness 55 mm; Feed speed variable up to 18 to 24 MPM (59' to 78' FPM). Hot Melt Glue System with reversibl...
Tiffin, OH
Trusted Seller
1999 Homag "Optimat KL 73/A3" Edgebander
- used
- Manufacturer: Homag
- Model: Optimat
Homag "Optimat KL 73/A3" Edgebander 0.3 - 3 mm Edge thickness cap., min. panel width 55 mm; max. panel thickness 55 mm; Feed speed variable up to 18 to 24 MPM (59' to 78' FPM). Hot Melt Glue System with reversibl...
Tiffin, OH
Trusted Seller
1993 IMA "AVM/K/I/G80/582/R" Edgebander
- used
- Manufacturer: IMA
IMA "AVM/K/I/G80/582/R" Edgebander 2 motor pre milling Glue station with pressure roller 2 motor end trim Top & Bottom trimming Top & Bottom buffing Multi roll edgebanding cart
Tiffin, OH
Trusted Seller
2004 Homag "KAL 310/11/E12" Edgebander/Softformer
- used
- Manufacturer: Homag
- Model: KAL
Homag "KAL 310/11/E12" Edgebander/Softformer Edgebanding thickness 0.3 - 12 mm; min. workpiece width 125 mm, panel thickness 7 - 60 mm, 50 mm panel overhang, profile depth top 20 mm and 15 mm for bottom; adjustab...
Tiffin, OH
Trusted Seller
1993 IMA "AVM/K/I/G80/582/R" Edgebander
- used
- Manufacturer: IMA
IMA "AVM/K/I/G80/582/R" Edgebander 2 motor pre milling Glue station with pressure roller 2 motor end trim Top & Bottom trimming Top & Bottom buffing Multi roll edgebanding cart
Tiffin, OH
Brandt KD56 Edgebander
- used
- Manufacturer: Brandt
- Model: KD56
Good condition Brandt KD56 Edgebanders available between 1998 and 2002 years. Located in Canada and other countries. Click request price for more information.
Canada