Used Granulators & Pelletizers in Illinois, USA

Coperion 58mm Mega Compounder Extrusion System | 500 HP | 5,000 LB/HR | Gala Underwater Pelletizer

• Manufacturer: Coperion Waeschle

54066001 Used Coperion 58mm Mega Compounder Extrusion System | 500 HP | 5,000 LB/HR | Gala Underwater Pelletizer. 900 RPM Screw Speed, 34:1 Approx. L/D Ratio, 11 Barrel Section Additional Images Flender Gearbox D...

PALLMAN PKM450 PULVERIZER 19038

• Manufacturer: Pallmann

Pallman model PKM450 pulverizer. S/N 1055.00.045. 2001 model year. 75 HP 230/460-volt 1785 RPM main drive motor. Rated at 550-770 lbs. per hour. Includes Eriez 4″ x 20″ vibratory feeder and 10 HP blower type AMXE...

REDUCTION ENGINEERING PULVERIZER 18836

• Manufacturer: Reduction Engineering

One (1) used Reduction Engineering model 75 single mill Pulverizer. S/N 235. Driven by a 30 HP 230/460-VOLT 3530 RPM motor. Includes Eriez vibratory feed, cyclone with 6″ inlet, and 2.5 HP 36″ Midwestern model MR...

ORENDA LAB PULVERIZER 18622

• Manufacturer: Orenda

One (1) used Orenda laboratory pulverizer having two (2) 10″ diameter double faced discs. S/N 10273. Single mill design. Eriez model 15A vibratory feeder. S/N 203560. 110/1/60. 7.5 HP belt drive on mill.. Base me...

SWEED 5110 SCRAP CHOPPER 18592

• Manufacturer: Sweed

Sweed model 5110 scrap chopper. S/N 11684. Powered by a 5 HP 208-230/460-volt 1725 RPM motor thru a gear reducer. Mounted on a homemade leg stand. Includes starter and controls.

CMS10 MILLING/PULVERIZING SYSTEM 18043

One (1) used CMS10 classified milling system. Package includes Micro #10 stainless steel pulverizer with 10 HP motor, air pulse type dust collector with five (5) port manifold and rotary valve, two (2) Azo classi...

Vecoplan/Cumberland Shredding Package – RG62/150UXL Shredder, 1462 Granulator, 48” Infeed Conveyor, Controls

• Manufacturer: Cumberland

10755169 Used Vecoplan/Cumberland Shredding Package. Includes Vecoplan model RG62/150UXL single shaft shredder. Serial# 10118010, built 2007. 20? diameter rotor with seventy-four (74) 40mm cutters. Single counter...

Pallmann IPA400/40 Agglomerator – 250 kW | LDPE HDPE PP | With Zerma 700/1000 Granulator & Cyclone Separator

• Manufacturer: Pallmann

42275062 Used Pallmann Agglomerator, Model IPA400/40. For LDPE HDPE LLDPE PP, etc. 250 kw (335hp) drive on agglomerator 18,5 kw (24.8hp) drive on vent 55 kw drive on granulator The supply includes : ZERMA GRANULA...

Collette Gral 600 High Shear Mixer – 600L | 50 HP | Stainless Steel | Pneumatic Discharge | Built 1990

• Manufacturer: Collette
• Model: Gral-600

11453482 Used 600 liter Collette High Shear Mixer, Model Gral 600, stainless steel product contact surfaces, 600 liter capacity, non jacketed mixing bowl with pneumatic plug valve discharge, approximately 50 hp m...

GEA Collette Gral 75 High Shear Mixer – 75L Capacity, Stainless Steel, Dual Agitation

• Manufacturer: Collette
• Model: Gral-75

43753003 Used GEA Collette High Shear Mixer, Model Gral 75. Stainless Steel construction, 75 liter capacity (missing bowl). Dual agitation. serial# 00GRL00750102

Rietz Disintegrator for Sale - 12” Diameter, 4” Outlet, Stainless Steel

• Manufacturer: Rietz

51974002 Used Rietz 12" Diameter 45 Degree Angle Disintegrator. 21" ID reduction chamber. (4) rows of 12" diameter, (5) hammers stacked on top with each other. (3) 12" diameter stainless steel 360 degrees reducti...

Niro Fielder PMA 300 High Shear Mixer – 300L, Stainless Steel, 10 HP Chopper

• Manufacturer: Niro Fielder
• Model: PMA-300

44298019 Used Niro Fielder High Shear Mixer, 300 liter, Model PMA 300, Stainless Steel construction, on stainless steel base with 10 hp chopper.

CUMBERLAND 2050B GRANULATOR 17689

• Manufacturer: Cumberland

Cumberland model 2050B granulator, S/N 651420-88001, 20″ x 50″ feed throat, new 5 knife 160mm high shear rotor, 2 bed knives (1 raised & 1 standard on upstroke), 200 HP 460-volt motor, solid chamber with swing ou...

CUMBERLAND 1628X GRANULATOR 18748

• Manufacturer: Cumberland

Cumberland model 1628X granulator. 16″ x 28″ feed throat. 3 knife open rotor with 2 bed knives. 20 HP 460-volt motor. Insulated combination style hopper. 6″ OD airveyor discharge, complete with starter and controls.