Used Granulators & Pelletizers in Illinois, USA

CUMBERLAND 484 GRANULATOR W/BLOWER 18878

• Manufacturer: Cumberland

Used Cumberland model 484 granulator. 14″ x 16″ feed throat. 3 knife open rotor with two bed knives. 15 HP motor. Insulated tray feed hopper with modified (removable) 2″ x 16″ slot entry. Insulated body panels. 4...

CONAIR CG1424 (RAPID R24) GRANULATOR 12486

• Manufacturer: Conair

Conair model CG1424 granulator (Rapid R24), S/N 410.105. 14″ x 24″ feed throat, 3 knife open rotor, 2 bed knife, tangential cutting chamber. 25HP 230/460V motor. Dual fly-wheel insulated tray feed hopper with 17″...

CUMBERLAND 1628X 30 HP GRANULATOR 19046

• Manufacturer: Cumberland

Used Cumberland model 1628X granulator system. S/N CA083050A-13019. 16″ x 28″ feed throat. 3 knife dual flywheel open rotor with two bed knives. 6″ OD airveyor discharge. Belt driven by a 30 HP 230/460-volt 1780 ...

IRWIN CHESAW CH-LH 28.7-04 GRANULATOR 12597

• Manufacturer: Irwin

Irwin Chesaw type CH-LH 28.7-04 granulator, S/N 7915, 5″ x 33″ rotor cutter, 15HP 208-230/460V 1,760 RPM through a fan cooled 10:1 gearbox. Lincoln auto-lube system, evacuated by a 5HP 208-230/460V 3,460 RPM blow...

NEW CUMBERLAND 1837B GRANULATOR 50510-23002

• Manufacturer: Cumberland

New Cumberland 1837B granulator, S/N 50510-23002, 2024 model year, 18″ x 37″ feed throat, 3 knife high shear rotor, 2 bed knife, 100 HP 230/460-Volt 1800 RPM motor, conveyor in-feed hopper, belt drive, 6″ right h...

2025 YEAR RAPID 600-90 GRANULATOR 18979

Rapid model 600-90 granulator. S/N 505035-10-1. Lightly used 2025 model year. 24″ x 36″ feed throat. Double scissor 5 knife rotor with 3 bed knives. 3rd bed knife is in position 5. Tangential cutting chamber. Dua...

LR-SYSTEMS UNDER THE PRESS GRANULATOR 5470

LR-Systems under the press granulator, no S/N. 8″ x 8″ magnetic infeed, 2 knife hook fly knife rotor, 2 bed knife cutting chamber. Approximately 3HP motor, 2″ OD vacuum take off. Complete with starter and controls.

CUMBERLAND 684 TWIN SHEAR GRANULATOR 18179

• Manufacturer: Cumberland

Cumberland model 684 granulator. S/N 91000-94037. 14″ x 26″ feed throat. 3 knife chevron cut open rotor, 2 bed knife. 30 HP 460-volt motor. Insulated tray feed hopper and body panels. Hopper has additional rear 1...

GRANUTEC TFG810-10 FEED ROLL GRANULATOR 17391

Granutec model TFG810-10 granulator, S/N 0109.4765, 8″ x 10″ feed throat, 3 knife rotor, 2 bed knife, 10 HP 460-volt motor, rear 10″ wide smooth steel feed roll in-feed powered by a 1/2 HP 90-volt D/C motor and v...

GRANULATOR FEED ROLLS 6929

Used granulator feed rolls. 41.5″ wide x 4.5″ knurled steel feed rolls powered by a 2HP 1,750 RPM 230V/460V motor into a 15:1 gearbox. Rolls are chain and sprocket driven.

NISSUI SA-35 LOW SPEED GRANULATOR 16230

• Manufacturer: Nissui

Nissui model SA-35 low speed granulator, S/N SA3500514. 24″ x 24″ feed throat, s-cutter rotor, 2 bed knife 2.2HP 460V gear motor top robot, hand infeed hopper. 1.5″ OD vacuum take off discharge. Mounted on caster...

NELMOR RF1215M1 GRANULATOR W/SIDE MOUNTED 17472

• Manufacturer: Nelmor

Nelmor model RG1215M1 granulator, S/N 8001-14279, 12″ x 15″ feed throat, 3 knife solid rotor, 2 bed knife, 20 HP 230/460-volt motor, insulated tray feed hopper and body panels, hydraulic jack back assisted hopper...

CUMBERLAND 584 TWIN SHEAR GRANULATOR 18483

• Manufacturer: Cumberland

Cumberland model 584 granulator. S/N 435600-797. 14″ x 20″ feed throat. 3 knife twin shear rotor, 2 bed knife. 20 HP 460-volt motor. Insulated tray feed hopper with additional rear 10″ x 21″ in-feed. Insulated bo...

ACCRAPAK SYSTEMS LAB PELLETIZER 18126

One (1) used Accrapak Systems model 750/1B laboratory strand pelletizer. 1″ entrance. 24 knife solid helical rotor. 1 HP drive motor. Includes 4″ air knife. S/N 5288-9-95