Used Cnc Lathes in Nuevo León, Mexico

MD 55

30 HP swing motor. One-piece 32″ wide bed with base design for rigidity. Multi-position adjustable longitudinal feed stop device. 4-way fast traverse. Extra third rail support improves cutting force. Pin-lock sty...

MD 63

30 HP swing motor. One-piece 32″ wide bed with base design for rigidity. Multi-position adjustable longitudinal feed stop device. 4-way fast traverse. Extra third rail support improves cutting force. Pin-lock sty...

HL 37

Motor power 20 HP, 16 speeds. 5.98″ spindle pitch. One-piece base with extra thick seams. Push button to engage speeds. One stroke lubrication for apron, carriage and guides. 2-speed countershaft. Magnetic clutch...

HR 35

Motor power 20 HP, 12 speeds. Spindle pitch 4.1″ (Optional 6.1″). Hardened and ground spindles, guides and gears. One-piece solid cast base and ground guideways for rigidity. Full length pedal brake. Button to en...

HW 30

15 HP, 12-speed main motor. 4.5″ (115 mm) spindle pitch. Hardened and ground spindles, guides and gears. One-piece solid cast base and ground guideways for rigidity. Full length pedal brake. Button to engage gear...

ML 1740T

7.5 HP main motor, 12-speed. 3.125″ spindle pitch. Solid bed throughout casting length with front tray for fast chip removal. Adjustable clutches for overloaded feeds. Quick reverse lever on the apron. Full-lengt...

RML 1640T

Motor power 5 HP. 36-1800 Speed range, 12 Steps. Hardened and ground gears, guides and bedplates. Solid bed on the whole casting length. Front tray for quick chip removal. T-slot compound pedal brake. Metric and ...

SSM 1340BV

Motor power 3HP. Infinitely variable speed range with RPM display in Hi/Low speed range. 1 phase or 3 phase. Push button for easy speed control. Hardened and ground gears and bedplates. Solid bedplate on the enti...

KLS 1840G

7.3 HP, 12-speed main shaft motor. Camlock D1-8, 3.2" shaft bore. Hardened and ground gears and bed ways. One-piece solid cast base. Jog button, multi-position feed stops. Inch journals and feed screws. Centraliz...

KLS 1340A

Engine power 2 HP. Gear box (8) speeds. Button to facilitate the change of gears. Hardened and ground guides. Pedal brake. Dial in inches and millimeters. ISO 9001 certified. 6″ 3-jaw chuck 8″ 4-jaw chuck 12″ dri...

YANG ML-28A CNC LATHE

• Manufacturer: Yang
• Model: ML-28

Year 1998 3,000 RPM Chuck: 10” | Bar step: 3”

OKUMA CADET CNC LATHE - L1420

• Manufacturer: Okuma
• Model: CADET L1420

Maximum oscillation: 24,4" | Swing on a cross slide: 18,90" | Maximum turning length: 26,06" | Spindle nose: A2-11 | Hole diameter: 4,33" | Spindle speed range: 2800 RPM | Z axis travel: 26,4" | X axis travel: 9...