Used Wire Machinery in Connecticut, USA

EVG Model LGR/52 Wire Mesh Machine

min.-max. wire dia. longitudinal & cross wire: .148″ to .250″ (3.8-6.3mm) max. welding width: 52″ long. wire of coils: cross wire pre-cut hopper fed min. line wire spacing: 1-1/2″ cross wire spacing: 3/4″ (.750″/...

Haedong 7-Block Wire Drawing Machine

Model HSD2403+2004 inlet: 5.5mm(.216″), exit .086″ approx. high carbon block dia.: 3 x 600mm – 4 x 500mm (7) seven x 40HP AC motors Blocks #1 and #2 have rotating die boxes all blocks have rotating soap boxes blo...

(4) Frigerio Wire Drawing Blocks

last used on Model S-500/9D 20″ dia. 8″ face 1″ flange 2″ bore 1-5/8″ under flange 4 available: (1) Model S-500 1208NA9 (3) Model S-500 1208A6

Nilson 3-F 4 Slide Wire Former 3/16" Wire w/ Oil Feed and Updated Motor

• Manufacturer: Nilson
• Wire diameter: 4.762499999999999 millimeter

4 Slides Newer Updated Baldor 5HP Motor and Adjustable Speed Drive (230/460v - 1160 RPM) Manual Mechanical Clutch 20 Tonnage 2" Strip Metal 15 STD Feed length

Eurodraw MTB460/7 Wire Drawing Machine

low carbon steel wire 7 blocks 460mm block dia. drawing range: inlet: 5.50mm max., outlet: 1.60-4.80mm max. pull on 1st draft: 800kg final drawing speed: 15m/sec. main D.C. motor power: 7 x 33.6kW, 1620 RPM Suppl...

Accra Model D-40 Powered Wire Payoff Turntable

4,000 lb. coil weight wire dia. size: .050″ to .500″ Marathon 7-1/2HP DC supplied with pulley units ideal for payoff to wire drawing machine

Jiangyin JinLiDa 9-Block Wire Drawing Machine

Model LZ1500.2-4-560+5+SGL1000 Block diameters 1-4: 560mm, 5-9: 500mm Block 1: 30KW AC motor, blocks 2-9: 22KW AC motors power voltage: AC380V-50Hz-3ph max. wire dia. start: 5.5mm (.216″) finish: 1.55mm (.061″) m...

(3) Zeus Techno Wire Welded Nail Collators

(2) Model M-90 and (1) Model MR-90 nail dia. range: 2.1-3.77mm (0.083″-.148″) nail length range: 19-100mm (.750″-4″) speed: 3000 NPM electric power: (1) 30kVA, 220V-3ph-50Hz nail angle range: 15-16 degree nails p...

Witechs RWCB/400-2 Steel Wire Brush Descaler

new 2015 2 pairs of motorized steel wire brushes wire quality: low – medium- high carbon wire dia. min.-max.: 5.0 to 8.0 mm wire passing speed: 4 m/sec. (4 units available.)

Witechs BSG/TF Wire Dry Coating Machine

wire dia. range: 5.5 to 16mm speed max.: 10M/sec. coating and separation chambers with screw, filter add-on

EVG Model GZS-102 Welded Wire Mesh Line

Max. working width: 108″ Max. welding width: 102″ (2590mm) Wire dia. range line and cross wires: .078”-.196” (2mm-5mm) Line and cross wire spacings: 0,5″- 8″, in steps of 0.5″ or 1″ (12.5-25mm) Speed: 100 strokes...

M+E (ITALY) MODEL NMG25 FINE WIRE WET DRAWING MACHINES

(Large Inventory) Wire drawing and drawing of brass high carbon steel wire Wire diameter entry – exit min-max.: 1.26mm to 0.220mm 1.01mm to 0.175mm 0.98mm to .160mm 0.92mm to .140mm 0.70mm to .100mm 0.58mm to .08...

Zeus Techno Model CN-90 Wire Welded Nail Collator

nail dia. range: 2.1-3.77mm (0.083″-.148″) nail length range: 19 to 100mm (.750″-4″) speed: 3000 NPM electric power: 30 kVA, 220V-3ph-60hz nail angle range: 15-16 degree nails per coil: 200 to 400 pcs. weight: kg...

Ernst Koch Model KGT16/9 +KHS1000 Intermediate Wire Drawing Line

• Manufacturer: Ernst

9 block/die x 400mm blocks x (9) 15kW motors inlet dia.: 2.5mm (.098″) outlet: 0.35mm (.013″) 9 x 400mm blocks (16″) 40M/sec. Take-up: traversing spooler 55kW, 1000mm dia. (40″) controls: Siemens S7 400 electroni...

Nilson #2-F 4 Slide Wire Former w/ Oil Feed and Updated motor

• Manufacturer: Nilson
• Model: 2-F

4 Slides New Style Baldor 3HP Motor (60hz -230/460v) 3 phase And Fuji Electric AC Drive Manual Operated Clutch 12T Please Reach out if you have any questions.

Wafios VDF80 Wire Machinery

• Manufacturer: Wafios
• Model: VDF80

Good condition Wafios VDF80 Wire Machinery available between 1974 and 1986 years. Located in USA and other countries. Click request price for more information.