Used Stamping Presses in Rhode Island, USA

Screw Fly Press Stamping Forging Press Metal Smith Knife Making

This is a Screw Fly Press, manual operation... great for metal smithing, jewelry or knife makers... working perfectly! PTWS # LR-000000-09132022-LR-03 Picture# 09062022 * All information deemed accurate but ma...

Perkins 20 Ton Punch Press with Enclosure High Speed Stamping Press

• Manufacturer: Perkins

This is a Perkins 20 Ton Air Clutch Air Brake Punch Press... Tested and in Excellent Condition! We have two available!! Serial #305721 Bed area 11 x 21 1-1/2" Stroke 1-1/2" Shank 20 Ton Palm Tree # LR-000000-0...

Hugold Air Press Stamping Assembly Press Pneumatic in perfect condition

• Manufacturer: Hugold

This is a used Hugold Air Press in excellent condition! RUNS ON 80 TO 100 PSI OF AIR (can connect to a normal compressor) 6 INCHES OF DIE HEIGHT (fully adjustable stroke) Palm Tree # LR-0000-101121-A Bid with ...

Hugold Automated Stamping Crimping Air Press with Rotary Table and Tooling

• Manufacturer: Hugold

This is a Hugold Automated Stamping Crimping Air Press with Rotary Table and Tooling - Dayton A.C. Induction Motor: - 1/2 Hp - 60 Hz - Single Phase - 1725 RPM PTWS - 04302023-LR-02 Picture# 04282023 * All inf...

Perkins 9 Ton Punch Press Crimping Stamping Steel Brass

• Manufacturer: Perkins
• Model: 200B

This is a Perkins Punch Press in excellent condition. - Model # 200 B - Serial #25053 - 9 Tons - 3 Phase - 3/4 Hp - 60 Cycle - 1140 RPM - 208/220/440 Volts - 3.5/1.7 Amps - Ram Adj. 1 1/2" - Shut Height 6 1/2 " ...

Perkins Transfer Stamping Punch Press Machine with Feed 15 Ton Pristine!

• Manufacturer: Perkins

WE HAVE 3 AVAILABLE! TRANSFER PRESSES...These presses have a double individual stroke timed for progressive tools... great for piercing and blanking after pierced. Also, to dome then blank.... fast and can be do...

Baird 15 Ton Stamping Punch Press Made in USA Bridgeport CT

• Manufacturer: U.S. Baird

Baird Mfg. Co. Bridgeport, CT. USA 15 Ton Double Palm Buttons Induction Motor: 1 HP 3 Phase 50/60 Cycle 220/440 Volts 1755 RPM Palm Tree # LR-0000-03302020LR-47 R042924 Pic# 12192019 Bid with Confidence on thi...

Die Cutting Stamping Press with Rapid Servo Stock Feed Automatic Diecut

Standard H Frame Stamping Press with Variable Frequency Drive Rapid Air Pro Servo Feed: Model # 112C Serial #110344 Servomotor: Serial # 366110 7.5 Amps 2009 SK: 22-90 L/4 S/N: 199911021056 Ratio: 14.69 S.F Max T...

Perkins 20 Ton Stamping Press Air Clutch Air Brake Automatic Punch Pristine!

• Manufacturer: Perkins

Perkins Punch Press Air Clutch Air Brake 20 Ton 220V 3 Phase Perfect Running Condition Stroke 1-1/2" Shank 1-1/2" Bed Area 11" x 21" Palm Tree # TC-000000-051119-D Bid with Confidence on this item, check our fe...

Danly Precision Die Set for stamping press with Tool in it Punching Piercing

• Manufacturer: Danly

Cat No. 0604 B 4 Lenkeit Industries: Job No.: 16874 Part No.: Frame.Die 3 Ton Req. Top Shoe Weight: 18 Lbs Shut Height: 5 1/2 Total weight: 47 Lbs Palm Tree # LR-0000-12072019LR-33 Pic# 11192019 Bid with Confi...

Steel Precision Ground Bolster Plates Spacers for Stamping Press Tooling

Various Sizes... Please contact us on which size you need! Price is per Spacer, discounts on multiple purchases! Palm Tree Cat# LR-0000-09012020LR-47 Pic# 07062020 Bid with Confidence on this item, check our ...

Bliss 20 Ton No. 62 Stamping Punch Press Metal Stamper 220V 3PH

• Manufacturer: Bliss

This is a Bliss 20 Ton Stamping Punch Press Metal Stamper - Model # 62 - Serial #479698 - Three Phase - 2 Hp - 900 RPM - 220/440 Volts - 7/3.5 Amps PTWS - 05292023-CHRONO-1 R102224 Picture# 05242023 * All in...

Bruderer Stock Feed for Stamping Press Rebuilt

• Manufacturer: Bruderer

This is a Bruderer Stock Roll Feed for Stamping Press ....this unit was Rebuilt and in pristine condition! To feed metal flat stock to a high speed Bruderer Press. PTWS - 12012022-LR-9 R070925 Picture# 112920...

Cooper Weymouth 8" Stock Leveler / Straightener with dancer arm to stop and start automatically Feed Metal Strip to Stamping Press

• Manufacturer: CWP

This is a Cooper Weymouth 8" Stock Leveler / Straightener with dancer arm to stop and start automatically. It also has forward and reverse. Straighten Brass, Light Mild Steel, Copper, Gold & Silver... Can be used...

Kenco 10 Ton Punch Press 460 Volts Crimping Stamping Steel Brass

• Manufacturer: Kenco

This is a 10 Ton Kenco Punch Press ...in excellent condition! - Model # 102-335-200 - Serial # 87-275 - 10 Tons - 460 Volts - 60 Hz - Three Phase - 90 SPM PTWS - 05072023-LR-3 Picture# 05062023 * All informat...