- Trusted Seller
Omga T521ST 18-20" Wood Cut Off Saw 5.6kw Upcut Pneumatic Control 230/460V 3Ph
- Manufacturer: Omga
Used, in Good Working Condition, Tested OK. This is for a 18" blade but 20" blade is optional. This unit comes with a 500mm blade which is basicly a 20" blade. Pneumatic foot pedal to activate cutting. 12-5/8" cr...
- Trusted Seller
Delta Radial Arm Saw 12" Blade 13" Travel 2 HP 230/460V 3 Ph
- Manufacturer: Delta
- Model: 33-892
Used, in Good Working Condition, Tested. Has a 12" blade. 13" max cutting travel. This saw is adjustable up to 90°. No top would use plywood top with backstop. 3Ph 2 Hp 230/460V motor. Wired for 230V Motor looks ...
$1,550 USDMillersburg, IN - Trusted Seller
Delta Radial Arm Saw 12" Blade 13" Travel 2 HP 230/460V 3 Ph
- Manufacturer: Delta
- Model: 33-892
Used, in Good Working Condition, Tested. Has a 12" blade. 13" max cutting travel. This saw is adjustable up to 90°. No top would use plywood top with backstop. 3Ph 2 Hp 230/460V motor. Wired for 230V Some stuff i...
$1,500 USDMillersburg, IN - Trusted Seller
Lincoln LAC-B2 Lincolnweld 5/32" SAW Submerged Arc Welding Wire 600lb Feed Drum
- Manufacturer: Lincoln
New Surplus. 5/32" Submerged Arc Welding Wire. Unopened Barrel. 600 Lbs. If this item ships as Flat Rate Freight please see details in Shipping tab
$1,520 USDMillersburg, IN - Trusted Seller
Lincoln LAC-B2 Lincolnweld 3/32" SAW Submerged Arc Welding Wire 600lb Feed Drum
- Manufacturer: Lincoln
New Surplus. 3/32" Submerged Arc Welding Wire. 600 Lb Barrel. If this item ships as Flat Rate Freight please see details in Shipping tab
$1,520 USDMillersburg, IN - Trusted Seller
Sampson SC Metal Cut Off Chop Saw 3500RPM 12" Blade 3Hp 230/460V Aluminum
- Manufacturer: Sampson
Used, in Good Working Condition. Removed From a Working Environment. This was used to cut aluminum. This is wired for 460V. Blade is carbide. The RPMs are close to 3500. Foot pedal operator. Air cylinder to cycle...
$1,750 USDMillersburg, IN - Trusted Seller
Lincoln LAC-B2 Lincolnweld 5/32" SAW Submerged Arc Welding Wire 630lb (2) Drums
- Manufacturer: Lincoln
New Surplus. Lot of 2 Partial Barrels. (1) 500 Lb (1) 130 Lb - 630 Lb Total 5/32" Submerged Arc Welding Wire. If this item ships as Flat Rate Freight please see details in Shipping tab
$1,440 USDMillersburg, IN - Trusted Seller
CTD F426 Straight Cut-Off Saw 16" Blade 2700 RPM 5 Hp 3Ph Air Foot Control 90°
- Manufacturer: CTD
Used, in Good Working Condition, Tested OK. 90° cut only. Has backstop set at an angle. Blade and saw head can not turn. Working height is 32-1/4" Foot pedal controls. Air powered. Auto oiler. Setup for metal cut...
$1,800 USDMillersburg, IN - Trusted Seller
Delta Rockwell Vintage Radial Arm Saw 12" Blade 5Hp Motor 20" Rip 230/460V 3Ph
- Manufacturer: Rockwell
- Model: 40-C
Used, in Working Condition, Tested OK. This saw does not come with a bench top. This saw is wired for 480V. Motor can be wired for 220/440V. 1" arbor If this item ships as Flat Rate Freight please see details in ...
$1,300 USDMillersburg, IN - Trusted Seller
Omga 600 Radial Arm Saw 14" Blade 5Hp Motor 24" 600mm Rip 230/460V 3Ph
- Manufacturer: Omga
Used, in Good Working Condition, Tested OK. 14" blade This saw is wired for 480V. This is not in new condition. Good used would better describe this unit. Was used in production. 5 hp motor. Can be wired 230 or 4...
$2,200 USDMillersburg, IN - Trusted Seller
CTD F255 Straight Cut off Chop Saw 10" Blade 3450RPM 3Hp 3Ph Aluminum Metal
- Manufacturer: CTD
Used, in Good Working Condition, Tested OK. Hand operator. Both hands have to be used to operate. Has oiler for the blades. Blade is 10". 3 hp motor. 230/460V. Wired for 480V. If this item ships as Flat Rate Frei...
$1,080 USDMillersburg, IN - Trusted Seller
CTD Machine Double End Compound Miter Pneumatic Trim Saw 3HP 460V 3PH 16' Rail
- Manufacturer: CTD Machine
Miter Saw in good working condition. CTD Machine 2DC-02. Recently upgraded to 3Hp motors and added Powerflex VFD drive. 10" Blades. 16' Rail length, 36" work height. 28" Base depth. If this item ships as Flat Rat...
$4,250 USDMillersburg, IN - Trusted Seller
CTD F426 Straight Cut-Off Saw 16" Blade 3450 RPM 5 Hp 3Ph Air Foot Control 90°
- Manufacturer: CTD
Used, in Good Working Condition, Tested OK. 90° cut only. Working height is 32-1/4" Foot pedal controls. Air powered. Auto oiler. Setup for metal cutting. Probably aluminum. 3450 RPM. 5Hp motor. 3Ph 230/460V. Man...
$1,800 USDMillersburg, IN - Trusted Seller
LeTarte EM11KA Aluminum Double Miter Saw 1.5HP Motors Dual Blades 230/460V 3Ph
- Manufacturer: LeTarte
Used, in Good Working Condition, Tested OK. 11" and 10.5" blades. Wired for 230V. If this item ships as Flat Rate Freight please see details in Shipping tab
$1,620 USDMillersburg, IN - Trusted SellerAuction
12" DAYTON MODEL 4HEW3 METAL / WOOD VERTICAL BAND SAW; 3/4 HP, 16" X 19" TABLE, BAND SPEED: 80 - 3,
- Manufacturer: Dayton
12" DAYTON MODEL 4HEW3 METAL / WOOD VERTICAL BAND SAW; 3/4 HP, 16" X 19" TABLE, BAND SPEED: 80 - 3,000 PPM
Kokomo, INVisit Auction Website
Tip: Enter manufacturer, model or keyword
