Used Punch Presses in Texas, USA

ROUSSELLE 4W 40 TON INDUSTRIAL PUNCH PRESS 45 S/MIN

• Manufacturer: Rousselle

Control panel checked out OK, will require debugging. Unit in good overall condition. Stroke: 2 In, Strokes/min: 45 Video of unit is available. Extra Information Brand: Rousselle MPN: 4W Capacity: 40 Ton Stroke: ...

PERKINS MACHINE COMPANY 200-B PUNCH PRESS 9 TON M4308

• Manufacturer: Perkins

UNIT IN GOOD CONDITION. RAM, MOTOR, CLUTCH IN GOOD CONDITION. CONTROL IS COMPLETE. MOTOR STARTS AND STOPS CORRECTLY, BUT START BUTTONS ARE NOT INITIATING A RAM CYCLE (PROBABLY A SENSOR ISSUE). STROKE 1-1/4" SHUT ...

PNEUMATIC INDUSTRIAL PUNCH PRESS 40 MM STROKE M0495

Stroke: 40mm. Throat Depth: 3.25 in. Cylinder shaft diameter: 35 mm. Base to shaft height: 9in. Excellent condition. Extra Information Brand: Unbranded MPN: Does Not Apply Stroke: 40 MM Shipping Weight: 85 LBS Sh...

PNEUTRONICS COMPRESSION RIVETER PNEUMATIC PUNCH PRESS 1 TON M1771

• Manufacturer: Pneutronics

Unit checked out OK, used as a Riveter. For Shipping: Table can be removed. Stroke: 1.25 In, Press Shot Height: 6 In Extra Information Brand: Pneutronics MPN: Does Not Apply Shipping Weight: 750 LBS Shipping Dime...

JT&M A-1019-0T-A PNEUMATIC PUNCH PRESS 120VAC

• Manufacturer: JT&M

Unit is missing components. Cylinder was tested and in good working condition. Sold as pictured, no returns. Extra Information Brand: JT&M MPN: A-1019-0T-A Shipping Weight: 100 LBS Shipping Dimensions: 24 ...

TOGGLE-AIRE JORACO 530BEM AIR PRESS

• Manufacturer: Toggle-Aire Joraco

Sold as pictured, see images for reference. 5" bore cylinder so it will be roughly 1/2 ton Extra Information Brand: Toggle-Aire Joraco MPN: 530BEM Shipping Weight: 80 LBS Shipping Dimensions: 12 (...

TABLE TOP PNEUMATIC PUNCH PRESS 1 1/2 STROKE T117495

Raw stroke 1 1/2 ", 3-3/4" back and forward stroke No manual No Part Number Extra Information Brand: Unbranded MPN: Does Not Apply Shipping Weight: 48 LBS Shipping Dimensions: 24 (in) ...

TOGGLE-AIRE JORACO 530BEM BENCHTOP AIR PRESS

• Manufacturer: Toggle-Aire Joraco

Sold as pictured, see images for reference. 5" bore cylinder so it will be roughly 1/2 ton Extra Information Brand: Toggle-Aire Joraco MPN: 530BEM Shipping Weight: 80 LBS Shipping Dimensions: 12 (...

PNEUMATIC PUNCH PRESS 6 INCH BORE 6X6 T95356

Unit tested and working. Front door with a pneumatic safety switch. Two front pneumatic start switches. Unit pictured is just a sample. Cylinder dimensions: 7 in x 7 in x 9 1/2 in. 1 1/2 inch Maximum stroke. 6 in...

JENZANO TABLE TOP PNEUMATIC PUNCH PRESS 3'' BORE 1 1/2'' STROKE

• Manufacturer: Jenzano

3¨ Bore 1 5/8¨ Shaft Diameter 1 1/2¨ Stroke Extra Information Brand: Jenzano MPN: Does Not Apply Shipping Weight: 120 LBS Shipping Dimensions: 22 (in) × 18 (in) ...

JANESVILLE TOOL & MFG 10034926 TWO POST DIE PRESS M0505

• Manufacturer: Janesville Tool & MFG

Removed from working equipment. Good working condition. Extra Information Brand: Janesville Tool & Mfg MPN: 10034926 Shipping Weight: 25 LBS Shipping Dimensions: 10 (in) × 10 ...

JT&M PILLAR A-1019 D-24DENC PNEUMATIC PUNCH PRESS 152 LB@80PSI T18239

• Manufacturer: JT&M Pillar

Unit is in fair condition. unable to test, sold as picture., 0570-014 SL3 RA3 RD3 A-1019 Extra Information Brand: JT&M Pillar MPN: A-1019 D-24DENC Shipping Weight: 58 LBS Shipping Dimensions: 23 (...