Used Material Handling in North Carolina, USA

ITEM 3054: BULK BAG LIFTING DEVICE CARBON STEEL USED

ITEM 3054: BULK BAG LIFTING DEVICE CARBON STEEL USED 47” x 47” 4 ½” LONG LOOP POCKETS 3” TUBE STEEL CARBON STEEL EXPANDED METAL AREA TO HOLD CHAIN FROM HOIST USED

ITEM 2710: CED CUSTOM EQUIPMENT DESIGN BULK BAG UNLOADER

ITEM 2710: CED CUSTOM EQUIPMENT DESIGN BULK BAG UNLOADER 18” DIAMETER BULK BAG DISCHARGE INLET 48” BULK BAG AREA WIDTH 66” BULK BAG AREA HEIGHT 51” DEEP BULK BAG CRADLE PNEUMATIC BULK BAG BOTTOM AIR CYLINDER MAS...

BULK BAG UNLOADER WITH 2 TON HARRINGTON HOIST AND TROLLEY

ITEM 2539: BULK BAG UNLOADER WITH 2 TON HARRINGTON HOIST AND TROLLEY, CODE NER020L BEAM MOUNTED WITH HOIST FOR MANEUVERING THE BULK BAG 47” x 47” BULK BAG PLATFORM 16” DIAMETER IRIS VALVE INLET FOR FLOW CONTROL ...

ITEM 2034-1: BULK BAG HOLDER STAND STAINLESS 36” L x 36” W x 60” H

ITEM 2034-1: BULK BAG HOLDER STAND STAINLESS 36” L x 36” W x 60” H BULK BAG/ SUPER SACK SUPPORT STAND 36” L x 36” W x 60” H STAINLESS CONSTRUCTION

ITEM 2780: BULK BAG OR BOX FILLER LOADER WITH SALINA KNIFE GATE MODEL S08-HT3-RS, USED

ITEM 2780: BULK BAG OR BOX FILLER LOADER WITH SALINA KNIFE GATE MODEL S08-HT3-RS, USED KNIFE GATE MODEL: S08-HT3-RS SER # 30938-001 S.V.C. CYL NO. : DAC35AL SIZE: I350x8 5397 8” DIAMETER INLET 84” x 25” SUPPOR...

U-Boat platform truck w/ contents

Drum lift

Drum lift

U-Boat platform truck w/ contents

2017 Hyster R30XM3

• Manufacturer: Hyster
• Model: R30XM3
• Hours: 5,607 hour
• Lifting capacity: 3,000 kilogram

The Hyster R30XM3 is a high-performance electric order picker designed for efficient material handling in narrow aisle environments. With a load capacity of up to 3,000 lbs and a maximum lift height of 360 inches...

2017 Hyster R30XM3

• Manufacturer: Hyster
• Model: R30XM3
• Hours: 8,179 hour
• Lifting capacity: 3,000 kilogram

The Hyster R30XM3 is a high-performance electric order picker designed for efficient material handling in narrow aisle environments. With a load capacity of up to 3,000 lbs and a maximum lift height of 360 inches...

2012 Hyster R30XM3

• Manufacturer: Hyster
• Model: R30XM3
• Hours: 2,500 hour
• Lifting capacity: 3,000 kilogram

The Hyster R30XM3 is a high-lift electric stock picker designed for fast, efficient order picking in high-density warehouse environments. With a 3,000 lb capacity, triple-stage mast reaching up to 300 inches, and...

2016 SKYTRAK 8042 Telehandler Forklifts

• Manufacturer: Skytrak
• Model: 8042
• HP: 110 horsepower
• Hours: 3,520 hour

8,000lbs Lift Cap / 42′ Lift Height 3513 HOURS Cummins Turbo Diesel Engine – “No DEF” 74HP, Solid BOSS Tires, 4WD, Crab-Steering, Frame Leveling, Auxiliary Hydraulics, Quick Tach, QC Carriage w/ Forks, Fleet Main...

2015 GEHL RS6-34

• Manufacturer: Gehl
• Model: RS6-34
• Hours: 2,420 hour
• Lifting capacity: 2,722 kilogram

Freshly serviced, work ready! Hours: 2,420

Taylor TE135S

• Manufacturer: Taylor

Taylor TE135S LP Forklift, S/N: S-BS-19496, 13500 Lb. Capacity, 216 Inch Lift Height, 6 Foot Forks and Sideshift, Powered by a Perkins LP Engine, Tires Good, Unit Runs and Operates, Condition: Good, Approx. Dimen...

Simmons-Rand Paymover T400

• Manufacturer: Simmons-Rand Paymover

1991 Simmons-Rand Paymover T400 Wide Body Push Back Tractor, S/N: 1067, with Crab and Coordinated Steer, Condition: Good - Unit Runs and Drives, Equipped with 90KVA Cumming Powered Gen Set on Rear (No Cables), Co...