Used Machine Tools in Pennsylvania, USA

2010 ROMP NCNT-31

• Manufacturer: ROMP

Wire diameter range: 2.1mm - 3.5mm | Nail length: Max 90mm | Production: 800-1500 NPM | Electrics: 480 V | Equipped with: With Vibe BowlVery Little Production Use

Powered Turntable

• Manufacturer: fh machinery

Equipped with: 110VTurntable diameter: 42"

SYNTRON FEEDERS 17" CCW

• Manufacturer: SYNTRON

Equipped with: Built in Feeder Cube220 Volts Single Phase

Roll Pointer

Equipped with: Size Range: 0.112" - 0.158"Number of Grooves: 111/2 HP115V

VAUGHN 25"

• Manufacturer: VAUGHN

Capstan diameter: 25" | Main motor: HH4 Ho 240 Volt DC | Equipped with: Siemens Motor Drive (Disconnected, on floor)

NEW HOLLAND K-23

• Manufacturer: New Holland
• Model: K-23

Basket size: 12" x 12" | Operating speed: 825 RPM | Load capacity: 75 lbs | Electrics: 220V | Approx. floor size: 24" x 37" x 36-1/2" H | Approx. weight: 400 lbs

WATERBURY #1

• Manufacturer: Waterbury Farrel

Maximum cutoff diameter: 3/16" | Maximum cutoff length: 1-1/2" | Maximum shank length: 1-3/16" | Maximum production: 100 PPM | Electrics: 220V | Approx. floor size: 32" x 40" | Approx. weight: 1500 lbs

WATERBURY NO. 1

• Manufacturer: Waterbury Farrel

Production: 150 PPM | Maximum shank diameter: .290" | Minimum shank length: 1/4" | Maximum shank length: Modified to run Parts 8" Long | Electrics: 440V | Approx. weight: 3500 pounds | Equipped with: Full Enclos...

TORIT 64

• Manufacturer: Donaldson / Torit / DCE
• Model: 64

36" CW Vibratory Bowl

Split Belt Conveyor

• Manufacturer: Correa

Equipped with: 8' OVERALL LENGTH6' INFEED4' DISCHARGE HEIGHT4" WIDE HINGED METAL BELT, SPLIT BELT

NATIONAL MACHINERY 3/16 DSSD

• Manufacturer: NATIONAL MACHINERY

Maximum cutoff diameter: 3/16" | Maximum cutoff length: 1-3/16" | Maximum shank length: 3/4" | Maximum production: 300 PPM | Electrics: 220V

SPEEDAIRE 5Z760

• Manufacturer: Speedaire

NILSON 1B

• Manufacturer: Nilson
• Model: 1B

Wire diameter range: ,020" - .050" | Maximum oscillation: 4" | Number of blocks: 10 | Motor: 1 HP | Equipped with: Single Oscillating Arbor

NATIONAL MACHINERY 3/16 DSSD

• Manufacturer: NATIONAL MACHINERY

Maximum cutoff diameter: 3/16" | Maximum cutoff length: 1-3/16" | Maximum shank length: 3/4" | Maximum production: 300 | Electrics: 208V/60Hz/3 Phase | Equipped with: Bushing Cut Off, Stripper