Suhner LPB 4 Low Profile Angle Polisher 4000 rpm 0.34 hp 1/4-20 Spindle
- Manufacturer: Suhner
Powerful, low speed angle grinder with 1/4 " working spindle. Unusually flat angle head for extraordinary maneuverability. Equipment: 1 ea. open end wrench SW 11 and SW 14, supply and exhaust hose.
$1,182 USDLebanon, NJ
Dynabrade .4 hp Angle-Head Die Grinder 49420 Planetary-Geared, Rear Exhaust
- Manufacturer: Dynabrade
Includes 50055 Collet Assembly and extended rear exhaust muffler to reduce noise levels. Governor-controlled motor maintains speed under load. Optional 54585 Side Handle Assembly is available. Lightweight thermal...
$1,156 USDLebanon, NJ
Dynabrade 12202 Stockade Reciprocating Filer Versatility Kit
- Manufacturer: Dynabrade
Kit includes 12201 Stockade Filer (with 12197 File Adapter), three files (90980, 90982, 90984) and 90977 Grit-File Abrasive Kit. 40 abrasive strips (1/4" and 1/2" wide) which mount to spring-steel extenders, to r...
$1,269 USDLebanon, NJ
Dynabrade 49402 - ANGLE-HEAD MINI-DYNORBITAL RANDOM ORBITAL SANDER VERSATILITY KIT (REPLACES 53402)
- Manufacturer: Dynabrade
Dynabrade 49402 - Angle-Head Mini-Dynorbital Random Orbital Sander Versatility Kit
$1,430 USDLebanon, NJ
Suhner WI 7-45 degree Angle Toolholder with Collet, G 22 Connection, 1.42" Width, 6.81" Length
- Manufacturer: Suhner
Angle toolholder 45 degree with collet and locking spanners, wearresistant housing, ball bearings, bevel gear, grease lubrication. Equipment: Collet 6mm, spanner set.
$1,024 USDLebanon, NJ
Suhner WI 10-S Special Toolholder With Mounting and Internal Thread, G 28 Connection, 1.54' Width
- Manufacturer: Suhner
Special toolholder with mounting and internal thread. With mounting flange for support plate type FSS with 115 mm
$1,058 USDLebanon, NJ
Palmgren 20" Disc Sander 220V 3Ph
- Manufacturer: Palmgren
Palmgren's 20" high performance disc finishing machines are built to handle general purpose to precision finishing applications. Medium to large parts are finished fast and effecively. The increased area of conta...
$3,561 USDLebanon, NJ
Palmgren 20-Inch Disc Sander 440v
- Manufacturer: Palmgren
Palmgren's 20" high performance disc finishing machines are built to handle general purpose to precision finishing applications. Medium to large parts are finished fast and effecively. The increased area of conta...
$2,671 USDLebanon, NJ
Steelmax TruBlue Cutting Fluid - 55 Gallon Drum
- Manufacturer: Steelmax
Steelmax TruBlue high performance cutting fluid is a fully-synthetic nitrite-free, water soluble cutting fluid engineered for used with both HSS and TCT annular cutters to improve cutting performance and extend c...
$1,892 USDLebanon, NJ
Burr King Model 15 Vibra KING Medium Bowls Combi PAKS, 1.3 Cubic Feet: 15220
- Manufacturer: Burr King
50-60 1/2 120/1 Yes Included No Yes No USA 1/2 HP / 120 volt / Single Phase Variable Speed FilterPak 4001
$4,899 USDLebanon, NJ
Stand Pak 5000 for Burr King Benchtop Vibratory Bowls
- Manufacturer: Burr King
The perfect mate for Burr King 150 and 200 Vibratory Bowls. Includes timer and power distribution. Stand Timer Power cord and outlet box
$1,015 USDLebanon, NJ
Dynabrade 68000 Coolant Filtration System
- Manufacturer: Dynabrade
Superfinishing requires very clean coolant. If the coolant is not filtered, the grinding residue will act as an abrasive slurry, which can affect the final finish. Dynabrade?s Coolant Filtration System filters th...
$3,860 USDLebanon, NJ
Burr King 10 quart Benchtop Vibratory Bowl
- Manufacturer: Burr King
Burr King 10 quart vibratory tumbler bowls are ideal for bench top polishing, descaling, deburring, and surface conditioning. These units are fast, quiet, and effective. Their heavy duty construction, small size ...
$1,155 USDLebanon, NJ- Trusted Seller
1999 Mazak VTC-30C with (2) Tool Probes, Chip Conveyor, Dual Tool Changers
- Manufacturer: Mazak
- Model: VTC 30C
2 x Automatic Tool Length Measurement Probe Mazak Monitoring System B Part Probing with Probes (both need new stylus) Chip Conveyor Dual 24 Station Servo Driven Tool Carousels - Total of 48 Tool Stations Remov...
Burr King Model 15 Vibra KING Medium Bowls, 1.3 Cubic Feet: 15110
- Manufacturer: Burr King
60 1/2 120/1 15 No 40 quart/1.3cf Included USA Easy Media Discharge Chute 2-3/4″ Discharge Chute 40 Qt / 10 Gal / 1.3 cu ft Capacity Maximum Load Capacity 150 pounds 75 lbs Ceramic / 50 lbs Plastic / 35 lbs Cob 1...
$3,399 USDLebanon, NJ
Baileigh IGBB-436 Grinding machine
- Manufacturer: Baileigh
- Model: IGBB-436
Good condition Baileigh IGBB-436 Grinding machines. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword