- Trusted Seller
Kvaerner SP45SL Screw Press #43446
- Manufacturer: KVAERNER
Kvaerner Sp45sl Screw Press, With Brook Hansen Rdh31-an-50 Gear Drive, 49.899/1 Ratio, With General Electric AC Motor, 125 Hp, 1785 Rpm, 444t Frame
Fitchburg, MA - Trusted Seller
Andritz/Dupps 3620 Dewatering Screw Press, 15.18" Outer Diameter, 10.87" Inner Diameter #29034
- Manufacturer: Andritz
- Model: 3620
Andritz/dupps Dewatering Screw Press Model 3620 Seal Spacer, Unused Storeroom Spare, 15.18" Outer Diameter, 10.87" Inner Diameter
Fitchburg, MA - Trusted Seller
Lot of Beloit Jones Pressmaster 18 Dewatering Screw Press Plates #31252
- Manufacturer: Beloit
Lot Beloit Jones Pressmaster 18 Dewatering Screw Press Plates, Stainless Steel, Holes 0.067", (2) Section 45" Length, 18" Inner Diameter, (2) Section 27" Length, 18" Inner Diameter, Unused Storeroom Spare, Job# 8...
Fitchburg, MA - Trusted Seller
G40 Electric Press Brakes (150 Ton, 13.4 ft. Bed)
- Manufacturer: Unknown
The G40 features an “O-frame” and is a 150ton 13.4ft. machine. It deflects less than a conventional C-frame while still remaining light weight. The G40 has five servo driven ball screws which crown and bend simul...
Waltham, MA 
Flagler Model H-2 1/2-7
- Manufacturer: Flagler
This Machine is standard equipped with no tooling in the center position. There are (2) sets of extended shafts to form any of the Auxiliary Rolls shown below.
Sutton, MA
Manual Rotary
- Manufacturer: Tennsmith
Versatile forming tools for the manual performance of numerous sheet metal operations. Tennsmith’s rotary machine, Model R22, with interchangeable rolls, is a versatile forming tool for the manual performance of ...
Sutton, MA- Trusted Seller
G20 Electric Press Brakes (60 Ton, 6.9ft. Bed)
- Manufacturer: Unknown
The G20 features an “O-frame” and is a 60 ton machine with a 6.9ft. bed length. It deflects less than a conventional C-frame while still remaining lightweight. The G20 electric press brake has three servo driven ...
Waltham, MA - Trusted Seller
G25 Electric Press Brakes (80 Ton, 8.5 ft. bed)
- Manufacturer: Unknown
The G25 features an “O-frame” and is an 80ton 8.5ft. machine. It deflects less than conventional C-frame while still remaining light weight. The G25 electric Press Brake has four servo driven ball screws which cr...
Waltham, MA - Trusted Seller
G30 Electric Press Brakes (100 Ton, 10ft. Bed)
- Manufacturer: Unknown
The G30 features an “O-frame” and is a 100ton 10ft. machine. It deflects less than a conventional C-frame while still remaining light weight. The G30 Electric Press Brake has five servo driven ball screws which c...
Waltham, MA 
Prima Power eP Genius
- Manufacturer: Prima Industrie
PRESS BRAKES Efficient servo-electric bending solution with a fast and automatic tools change storage READY TO PRODUCE Thanks to the automatic tools change, the machine is always ready to produce. ACCURATE Red...
Shrewsbury, MA
Prima Power Combi Genius
- Manufacturer: Prima Industrie
PUNCHING AND LASER CUTTING COMBINED MACHINES Punching + Laser cutting = Superior manufacturing economy 1+1>2 HIGH TOOLING CAPACITY Customized turret design allows up to 384 standard or 128 index tools for activ...
Shrewsbury, MA- Trusted Seller
Branson Ultrasonic Vibration Welder
- Manufacturer: Branson
- Amperage: 800 ampere
Model: Mini II | Maximum clamp force (lbs): 800 | Amplitude range :: 0.040" to 0.070" (1.02 to 1.8 mm) | Lift table speed:: 10 inches/second (254 mm/second) | Total dry cycle time (without welding):: 5.0 secon...
Worcester, MA - Trusted SellerAuction
Devens, MAVisit Auction Website - Trusted SellerAuction
Devens, MAVisit Auction Website - Trusted SellerAuction
Devens, MAVisit Auction Website 
Pacific 150PF-OBS Crank Press
- Manufacturer: Pacific
- Model: 150PF-OBS
Good condition Pacific 150PF-OBS Crank Presses manufactured in 1980. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword