Used Machine Tools in Kansas, USA

3-JAW SELF CENTERING DIRECT MOUNTING LATHE N MAX = 3000

• Manufacturer: Martin

“MAY HAVE SHELF WARE” SELF CENTERING DIRECT MOUNTING LATHE 3 JAW N MAX = 3000 3285-6-1/4"-1-1/2"-8 APPROXIMATLEY 30LBS DT-3683-SK499-1-BH

YUASA LATHE CHUCK 4 JAW 1A789 OAL 12" H 7" OAL OF JAW 4"

• Manufacturer: Yuasa

“MAY HAVE SHELF WARE” YUASA LATHE CHUCK 1A789 4 JAW OAL OF JAW 4" OAL 12" H 7" APPROXIMATLEY 76LBS DT-3950-SK154-1-BH

PRATT BURNERD LATHE CHUCK 9210-02515, 3 JAWS, 10" DIAMETER, 3" ID, STEEL

• Manufacturer: Pratt Burnerd

“SOME RUST, SOME WEAR” PRATT BURNERD LATHE CHUCK 9210-02515 JAWS: 3 OVERALL DIAMETER: 10" INSIDE DIAMETER: 3" THICKNESS: 3-1/2" OAD: 10" X 10" X 5" WEIGHT: 51 LBS JLH/#11801/SKID#380/ (1) E

DILLION MANUFACTURING KW12B-6H SOFT LATHE CHUCK JAWS LOT OF 2

• Manufacturer: DILLIO MANUFACTURING INC.

“BOX MAY HAVE SHELF WEAR , BOX OPENED FOR PICTURES” DILLION MANUFACTURING KW12B-6H SOFT LATHE CHUCK JAWS LOT OF 2 OAD 5" X 2" X 8" BOX OAD 14-3/8" X 7" X 7-1/2" WEIGHT 18LBS TYPE - SQUARE JAW INTERFACE 1.5MM X 60...

HURON LATHE CHUCK 10PBAHJ0DDIA6, 3 JAWS, 10" DIAMETER, 3" ID, STEEL

• Manufacturer: Huron

“SOME RUST, SOME WEAR” HURON LATHE CHUCK 10PBAHJ0DDIA6 JAWS: 3 OVERALL DIAMETER: 10" INSIDE DIAMETER: 3" THICKNESS: 3-1/2" OAD: 10" X 10" X 5" WEIGHT: 64 LBS JLH/#11802/SKID#132/ (2) E

HUA PAI SELF-CENTERING MANUAL LATHE CHUCK 4 JAW 400MM DIAMETER 1600 RPM MAX

• Manufacturer: Tornos

“SOME RUST” SELF-CENTERING MANUAL LATHE CHUCK 4 JAW 400MM DIAMETER 1600 RPM MAX 16" CHUCK SIZE 5.354" BORE 0.4"- 15.4" RANGE 16" X 16" X 8" OAL WEIGHT: 141 LBS CS/#161/P8-1/(1)/BE B...

YUASA 8 A8054 3 JAW MANUAL LATHE CHUCK 8-1/4" DIA. SELF-CENTERING PLAIN BACK

• Manufacturer: Yuasa

“OLD STOCK , MAY HAVE SHELF-WEAR.” YUASA MANUAL LATHE CHUCK CHUCK TYPE - SELF-CENTERING MOUNT TYPE - PLAIN BACK CONTENTS - TOP REVERSIBLE JAWS CHUCK DIA. - 8-1/4" NO. OF JAWS - 3 MAX. JAW CAPACITY - 7.2835" AXIAL...

15" 2 JAW MANUAL SELF CENTERING LATHE CHUCK W BASE 304 D7 BORE ID 1-1/8"

“OLDSTOCK, AREAS OF SURFACE RUST” 2-JAW LATHE CHUCK SELF CENTERING W/BASE MANUAL CHUCK SIZE 15" BORE ID 1-1/8" JAW LENGTH 5-5/8" JAW WIDTH 3-1/2" JAW HEIGHT 3-5/16" JAW BORE ID 1-9/16" JAW BORE OD 3-1/8" TRAVEL L...

LEBLOND SKIVE LATHE, TL-20, 12" SWING, W/ TRUE-TRACE HYDRAULIC UNIT, A023042

• Manufacturer: Leblond

“NOT TESTED” LEBLOND SKIVE LATHE TL-20 12" SWING TRUE-TRACE HYDRAULIC UNIT A023042 30 GAL TANK LINCOLN MOTOR 3 HP 230/460 V 1750 RPM 8.4/4.2 AMP 118" X 56" X 66" OAL DIM. OF ALL 6000 LBS ESTIMATED WEIGHT CS/272/S...

TOS TRENCIN SN 45A GAP BED LATHE SERIAL NO. 045108319 3 JAW CHUCK 18" SWING

• Manufacturer: TOS

“COSMETIC WEAR, NOT TESTED” TOS TRENCIN GAP BED LATHE MODEL- SN 45A SERIAL NO. 045108319 MADE IN CZECHOSLOVAKIA YEAR MADE 1967 3 JAW CHUCK 12" CHUCK DIA THROUGH HOLE 1-3/8" SPLIT BED-16-19" 42" BED LENGTH 18" SWI...

HARDINGE SECOND OPERATION LATHE, DV 59, 2 HP, 440 VOLTS, 3PH, 3500 RPM, 9" SWING

• Manufacturer: Hardinge
• Model: DV 59
• Phase type: Three-phase

“NOT TESTED, SURFACE RUST.” HARDINGE SECOND OPERATION LATHE MODEL: DV 59 SERIAL #: OOB3279 2 HP 440 VOLTS 3 PHASE 60 CYCLES 3500 RPM MAX SWING: 9" 930 LBS, 56" X 27" X 50" GF-414-WB BASEMENT-(1)-SIG

HARDINGE BENCH MODEL LATHE, SPEED PRECISION, MODEL: HSL-59, 3 PH, 1/2 HP, 230 V

• Manufacturer: Hardinge
• Model: HSL 59
• Phase type: Three-phase

“NOT TESTED” HARDINGE BENCH MODEL LATHE, SPEED PRECISION, MODEL: HSL-59, 3 PH, 1/2 HP, 230 V HARDINGESUPER PRECISIONBENCH MODEL LATHEMODEL: HSL-59YEAR: 1982SERIAL NO: HSL-5C-4241TPHASE: 3SUPPLY VOLTS: 230HORSEPOW...

SKINNER-HORTON 10" THREE JAW LATHE CHUCK 10 102 10 L0A BORE ID 2-1/2" OD 2-5/8

SKINNER-HORTON THREE JAW LATHE CHUCK 10" 10 102 10 L0A JAW LENGTH 3-3/4" JAW HEIGHT 3-3/8" JAW WIDTH 1-1/2' BORE ID 2-1/8" BORE OD-2-5/8" BORE DEPTH 4-7/8" OPPOSITE SIDE OF BORE 4-1/2" CHUCK HEIGHT 5" OAD- 10" X ...

BUCHANAN CRIMPING KIT, 11437-7, MS3191-A CRIMPER, W/ 30 POSITIONERS, 3 REMOVERS

• Manufacturer: BUHCANAN

“MAY BE MISSING A FEW POSITIONERS” BUCHANAN CRIMPING KIT, 11437-7, MS3191-A CRIMPER, W/ 30 POSITIONERS, 3 REMOVERS BUCHANAN CRIMPING KIT11437-7MS3191-A CRIMPERW/ 30 POSITIONERS(1) CET-FRF12 TOOL REMOVER(1) MS242...

BUCHANAN CRIMPING KIT,10345 CRIMPER, W/ 40 POSITIONERS, 3 REMOVERS

• Manufacturer: BUHCANAN

“ITEM IS USED” BUCHANAN CRIMPING KIT,10345 CRIMPER, W/ 40 POSITIONERS, 3 REMOVERS BUCHANAN CRIMPING KIT11437-7MS3191-A CRIMPERW/ 40 POSITIONERS(1) CET-FRF12 TOOL REMOVER(1) MS24256R16 DANIALS MFG TOOL REMOVER(1)...