Used Lathes in Texas, USA

23" X 79" Used Mori Seiki Engine Lathe

• Manufacturer: Mori Seiki

Machine has been cleaned, painted and cycled. Cross slide and compound will be be dismantled and cleaned and checked. Apron and gearbox and headstock will be flushed and new oil. New belts

22" X 60" Yam Engine Lathe Model 1500 HC

• Manufacturer: YAM

22" X 60" Yam Engine Lathe Model 1500 HC Specifications Swing Over Bed: 22" Swing In Gap: 29" Swing Over Cross Slide: 14 3/4" Distance Between Centers: 60" Spindle Speeds (12): 25- 1,500 RPM Spindle Nose: D1- 6 C...

21" X 100" Mazak Engine Lathe Model 21100

• Manufacturer: Mazak

17" X 100" Used Turn-Nado (South Bend) Engine Lathe

• Manufacturer: South Bend

17" X 100" Used Turn-Nado (South Bend) Engine Lathe Swing Over Bed Ways 17" Swing Over Cross Slide 10" Center Distance 100" Chuck Size 15" 4-Jaw Spindle Nose D-1-8 Spindle Speeds 30 To 1,580 Rpm's Spindle Hole 3-...

Auto Strong NT-210 10" 2-Jaw through-hole power chuck, NT-200 Series Lathe Chucks

• Manufacturer: AUTO Strong

“Nice Used Chuck Ready To Turn Again” All sliding surfaces are hardened and ground for accurate actual running and long service repeatability. Lubrication nipple in each base jaw.

30" X 120" Used Mazak Hollow Spindle Engine Lathe

• Manufacturer: Mazak
• Model: 30

30" X 120" Used Mazak Hollow Spindle Engine Lathe Swing Over Bed Ways 30" Swing Over Cross Slide 20-3/4" Bed Way Width 22" Center Distance 120" Spindle Hole 12-1/2" Spindle Speeds 5 To 300 Rpm's Spindle Nose A-20...

D1-6 Type Adapter Plate for 16" Chucks Lathe Chuck Adapter Back Plates

Application 16" Chuck Spindle Taper D1-6 Body Material Steel Through Hole Diameter 7 3/4" 7.75" 196.85mm Item is new in crate. Only removed for photos. May show signs of shelf wear

Kitagawa Ironworks JN12T 3-Jaw Scroll Chuck with 2 Chuck Wrenches Lathe Chucks

• Manufacturer: Kitagawa

“In good working condition” Understanding Range: Outer Diameter: Min: 0.4 inches (10 mm) grasp range: outer diameter max: 11.8 inches (300 mm)

BISON ADAPTER PLATE 8245-20-11 FOR D1-11 SPINDLE Lathe Chuck Adapter Back Plates

• Manufacturer: Bison

CHUCK COMPATIBILITY: SET- TRU MOUNT TYPE: D1-11 NOMINAL CHUCK SIZE: 20 BRAND: BISON CHUCK DIAMETER: 7.59 MULTIPACK: 1 SPINDLE NOSE TYPE: D SERIES Item is new in crate only removed for photos does show slight sign...

17" X 50" Mori Seiki Engine Lathe Model MS-1250 G

• Manufacturer: Mori Seiki

10" SCA 3-Jaw Lathe Chuck with A1-8 Mounting Machinery

• Manufacturer: SCA

“In great working condition” 10" SCA 3-Jaw Lathe Chuck with A1-8 Mounting

25" X 120" Used Lehmann Hollow Spindle Engine Lathe Model 2516

BISON ADAPTER PLATE ADAPTER PLATE 8245-25-8 FOR D1-8 SPINDLE Lathe Chuck Adapter Back Plates

• Manufacturer: Bison

CHUCK COMPATIBILITY: SET- TRU MOUNT TYPE: D1-8 NOMINAL CHUCK SIZE: 25 BRAND: BISON CHUCK DIAMETER: 5.35 MULTIPACK: 1 SPINDLE NOSE TYPE: D SERIES New in crate! Does show signs of shelf wear. Only removed for photos.

22" x 60" SunMaster Model CH-2260 Engine Lathe, New

• Manufacturer: Sunmaster

Note: All Specifications Subject to Verification Stock Machines Equipped with the Following Options: Taper Turning Attachment - 10 Deg., 12" Travel Newall DRO System 12" 3-Jaw Chuck Longitudinal Rapid Traverse Ca...

25" X 120" Used Lehmann Hollow Spindle Engine Lathe Model 2516