Used Lathes in New York, USA

LeBLOND Engine Lathe : Regal 1963 15×40 cc

• Manufacturer: Leblond

15” Swing Over Bedways 9” Swing Over Cross Slide Hardways Inch Threading Taper Attachment Spindle Speeds from 45 to 1800 RPM 1.5” Spindle Bore 3-Jaw Chuck Toolpost Chip Pan 5 HP 220/440 Volt Electrics S/N: 4C874 ...

Flatback Lathe Chucks

Flatback Lathe Chucks Good Condition

LeBlond Heavy Duty Engine Lathe 1610 20″ x 60″

• Manufacturer: Leblond

Capacity: Swing Over Bed and Carriage Wings: 20-1/2″ Swing Over Compound Rest: 12-7/8″ Distance Between Centers: ...

TOS SN55B-71B

• Manufacturer: TOS

Country: Canada | Tos sn55b-71b 28'' x 130'' gap bed engine lathe with 15'' 4-jaw chuck, threading, speeds to 1,000 rpm, steady rest & follow rest, newall dp700 dro, sn: 071375314

TOOLMEX TUR 630A

• Manufacturer: Toolmex
• Spindle bore: 139.7 millimeter

Imperial Metric Country: Canada | Tur 630a hollow spindle lathe: Spindle 5.78", Front Chuck 5.5", Rear Chuck 4.9", 24.8" Swing Over Bed, 14.9" Over Cross Slide, 118.1" Distance Between Centers, Spindle Speeds to ...

Several DV-59’s & HLV’s Hardinges

STANKO-RYAZAN 1M63H-3

• Manufacturer: Ryazan

Imperial Metric Ryazan 1M63H Gap Bed Lathe 27.5" Swing Over Bed, 118" Between Centers, 13.78" Swing Over Carriage, 10 -- 1250 RPM, Taper Attachment, 4.13" Spindle Bore, Inch/Metric Threading, 20 HP

AFM TUG 40X2000

• Manufacturer: AFM
• Spindle bore: 52 millimeter

Imperial Metric AFM lathe TUG 40 x 80" Swing: 450 mm | Centers: 2,000 mm | Spindle bore: 52 mm | Power: 5.5 kW

TOS SN 71C

• Manufacturer: TOS
• Model: SN 71C
• Spindle bore: 76.19999999999999 millimeter
• Power requirement: 7.06 kilowatt

Imperial Metric TOS SN 71 C 3000MM ENGINE LATHE, NEWALL NMS300 DRO SPECIFICATIONS: TAILSTOCK QUILL ADJUSTMENT:: 290 MM

1997 WASINO LEO 200A

• Manufacturer: Amada - Wasino
• Spindle bore: 66.675 millimeter

Imperial Metric Wasino Model LEO200A, 20" x 60" Geared Head Lathe, s/n 5921, New 1997, Sony 2-Axis D.R.O., 2" Thru Hole, 12" 4-Jaw Chuck, Quick Change Tool Post, Steady Rest, Tail Stock, Inch/Metric, with Taper A...

Davenport Wide Size Tool Holder #2898

• Manufacturer: Davenport

Asset Description Notes: Davenport Part Number 2726-29-SA Oversize Size tool holder. Made by Davenport

LeBlond Production Lathe

• Manufacturer: Leblond

Equipped With : Turret Carriage Stop Aloris Tool Holder 8 ½” 3 Jaw Chuck Jacobs Flex collet holder with many collets Steady rest Drive and Face Plates SN: CHEV 308151C 18RR1515Good Condition

Pratt & Whitney 10“ x 15” Engine Lathe

• Manufacturer: Pratt & Whitney

with 5” 3-jaw chuck with Key Aloris-type tool holder X-Y Compound slide On fabricated stand 120 volts single phase Weight is about 350# Tailstock drill chuck Good Condition

Hardinge HLV-EM Lathe

• Manufacturer: Hardinge
• Model: HLV-EM

Good condition Hardinge HLV-EM Lathes manufactured in 2000. Located in USA and other countries. Click request price for more information.