Used Engine Lathes in Vermont, USA

1969 LeBlond SERVO SHIFT

• Manufacturer: Leblond
• Spindle bore: 50.8 millimeter

Manual Engine Lathe -EQUIPPED WITH- Newall C80 DRO Inch Threading Steady Rest Chip Trays

1961 Monarch 18 X 30

• Manufacturer: Monarch
• Spindle bore: 38.099999999999994 millimeter

Engine Lathe Swing over ways: 18.5" | Swing over cross slide: 11" | Distance between centers: 30" | Spindle hole: 1.5" | Spindle speeds: 24 - 1,028 RPM | Threading range: 2 - 120 TPI

1986 Clausing COLCHESTER 21

• Manufacturer: Clausing/Colchester

Manual Engine Lathe -EQUIPPED WITH- Inch/Metric Threading 3 Jaw Chuck & 4 Jaw Chuck 7" Steady Rest Coolant System

Axelson 25 x 144

Engine Lathe SOLD-----------------SOLD-----------------------SOLD

1999 Tos SU 150 H

• Manufacturer: TOS
• Spindle bore: 115 millimeter

Manual Engine Lathe -EQUIPPED WITH- 4 Jaw 31" Chuck Steady Rest Metric & Inch Threading Safety Guards Rapid Feeds Low Hours

2007 Ryazan RT983-3

• Manufacturer: Ryazan

Manual Engine Lathe -EQUIPPED WITH- 2 x 4 Jaw Power Chuck & TTA Large Steady Rest Taper Attachment 4 Way Tool Post

1950 VDF Wolenberg 42X216

• Manufacturer: VDF - Boehringer

Engine Lathe -EQUIPPED WITH- Inch/Metric Threading Cuts Threads in Metric, English, American & Acme Taper Attachment Conversion Gears Books & Manuals(In English)

1991 Ryazan 1H65-3

• Manufacturer: Ryazan

Manual Engine Lathe -EQUIPPED WITH- 39" 4-Jaw Chuck 19-1/2" 3-Jaw Chuck Hard Ground Bed Dorian Tool Post Newall 2-Axis DRO In/Met Treading Inch Dials (2) Steady Rests Follow Rest Thread Dial Coolant

1997 Toolmex TUJ50M-157

• Manufacturer: Toolmex
• Spindle bore: 76.19999999999999 millimeter

Manual Engine Lathe -EQUIPPED WITH- 16” 4-jaw chuck (3.5” bore) 1-1/2” to 9-3/4” capacity steady rest taper attachment chuck guard work light thread dial coolant pump system full length splash guards parts catalo...

2007 Sunfirm SET 28120

• Spindle bore: 152.39999999999998 millimeter

Manual Engine Lathe Swing over bed: 28" | Swing over cross slide: 20" | Swing in gap: 40" | Distance between centers: 120" | Spindle bore: 6" | Spindle speed: 1,000 RPM | Inch & metric threading: Yes

1962 Harrison-Clearing 12X40

• Manufacturer: Harrison
• Spindle bore: 31.75 millimeter

Manual Engine Lathe Swing over ways: 12" | Swing in gap: 22" | Distance between centers: 40" | Spindle bore: 1.25" | Spindle speed: 2,000 RPM

Dimco PV45

• Spindle bore: 88.89999999999999 millimeter

Manual Engine Lathe Machine type: A-61 | Model number: 297-44 | Swing over bed: 36" | Swing in gap: 60" | Distance between centers: 96" | Spindle hole: 3.5" | Over all length of machine: 180"

Betts-Bridgeford 42X288

• Manufacturer: Betts Bridgeford

Manual Engine Lathe Swing over ways: 42" | Distance between centers: 288" | Jaw size: 28" (4-Jaw) | Spindle motor: 10 HP | Taper attachment: Yes | Threading: Yes

1980 Yamazaki MAZAK REX 30

• Manufacturer: Mazak

Manual Engine Lathe -EQUIPPED WITH- 40-1/2" Swing Gap x 13-3/8" Inch, Metric, Witworth, & D.P. Threading Taper Attachment(Detatchee) Thread Dial Hardened & Ground Ways 18" 3-Jaw Chuck 24" 4-Jaw Independent Chuck ...

Tos SN 50 C

• Manufacturer: TOS

Manual Engine Lathe -Equipped With- Digital Read Out Tail Stock