Used Granulators & Pelletizers in Illinois, USA

Pallmann IPA400/40 Agglomerator – 250 kW | LDPE HDPE PP | With Zerma 700/1000 Granulator & Cyclone Separator

• Manufacturer: Pallmann

42275062 Used Pallmann Agglomerator, Model IPA400/40. For LDPE HDPE LLDPE PP, etc. 250 kw (335hp) drive on agglomerator 18,5 kw (24.8hp) drive on vent 55 kw drive on granulator The supply includes : ZERMA GRANULA...

SWEED 5110 SCRAP CHOPPER 18592

• Manufacturer: Sweed

Sweed model 5110 scrap chopper. S/N 11684. Powered by a 5 HP 208-230/460-volt 1725 RPM motor thru a gear reducer. Mounted on a homemade leg stand. Includes starter and controls.

CMS10 MILLING/PULVERIZING SYSTEM 18043

One (1) used CMS10 classified milling system. Package includes Micro #10 stainless steel pulverizer with 10 HP motor, air pulse type dust collector with five (5) port manifold and rotary valve, two (2) Azo classi...

Collette Gral 600 High Shear Mixer – 600L | 50 HP | Stainless Steel | Pneumatic Discharge | Built 1990

• Manufacturer: Collette
• Model: Gral-600

11453482 Used 600 liter Collette High Shear Mixer, Model Gral 600, stainless steel product contact surfaces, 600 liter capacity, non jacketed mixing bowl with pneumatic plug valve discharge, approximately 50 hp m...

GEA Collette Gral 75 High Shear Mixer – 75L Capacity, Stainless Steel, Dual Agitation

• Manufacturer: Collette
• Model: Gral-75

43753003 Used GEA Collette High Shear Mixer, Model Gral 75. Stainless Steel construction, 75 liter capacity (missing bowl). Dual agitation. serial# 00GRL00750102

Rietz Disintegrator for Sale - 12” Diameter, 4” Outlet, Stainless Steel

• Manufacturer: Rietz

51974002 Used Rietz 12" Diameter 45 Degree Angle Disintegrator. 21" ID reduction chamber. (4) rows of 12" diameter, (5) hammers stacked on top with each other. (3) 12" diameter stainless steel 360 degrees reducti...

Niro Fielder PMA 300 High Shear Mixer – 300L, Stainless Steel, 10 HP Chopper

• Manufacturer: Niro Fielder
• Model: PMA-300

44298019 Used Niro Fielder High Shear Mixer, 300 liter, Model PMA 300, Stainless Steel construction, on stainless steel base with 10 hp chopper.

CUMBERLAND 2050B GRANULATOR 17689

• Manufacturer: Cumberland

Cumberland model 2050B granulator, S/N 651420-88001, 20″ x 50″ feed throat, new 5 knife 160mm high shear rotor, 2 bed knives (1 raised & 1 standard on upstroke), 200 HP 460-volt motor, solid chamber with swing ou...

CUMBERLAND 1012 GRANULATOR 7698

• Manufacturer: Cumberland

Cumberland model 1012 granulator, S/N 25086-6356. 10HP 230/460V motor, 10″ x 12″ feed throat, 2 knife fly, solid rotor, 2 bed knife, bin discharge, mounted on casters, complete with starter and controls.

CUMBERLAND 684 GRANULATOR 10469

• Manufacturer: Cumberland

Cumberland model 684 granulator. S/N 291650-7935. 14″ x 26″ feed throat, 3 knife twin shear rotor, 2 bed knife, 30HP 230/460V motor. Tray feed hopper, 5″ left hand airveyor discharge. Mounted on casters, complete...

IMS GAU-46 AUGER GRANULATOR 8712

IMS model GAU-46 auger granulator, S/N AL-620860199 10″ x 10″ cutting chamber, 7.5HP motor. 10″ x 42″ auger area 1.5HP auger motor.

CUMBERLAND 14″ PELLETIZER ROTOR 12 8427

• Manufacturer: Cumberland

Cumberland 14″ pelletizer rotor. 12-knife bolt-on. CECO part no. 54063.

CONAIR CL1018 GRANULATOR 17381

• Manufacturer: Conair

Conair model CL1018 granulator, S/N 300.1556, 10″ x 18″ feed throat, 3 knife open rotor, 2 bed knife, 7.5 HP 230/460V 870 RPM (slow speed) motor. Can be changed out to a normal rate of 1,800 RPM. Tray feed hopper...

NELMOR 812 AUGER GRANULATOR 1032

• Manufacturer: Nelmor

Nelmor 812 auger granulator, S/N none. 8 x 12 feed throat 8 x 29 auger area, 2 knife fly solid rotor, 2 bed cutting chamber 7.5HP granulator motor 2.0HP auger motor, complete with starter and controls. Mounted on...