Used Forging in New York, USA

2014 Clansman Dynamic Model C2100 Rail-Bound Forging Manipulator

• Manufacturer: Clansman

Features: 6 Axes of Movement 270 Degree Cab Rotation Equipped With: 6 Axes of Movement 270 Degree Cab Rotation 400L Hydraulic Tank 460VAC,3PH, 60Hz, 100A Power requirements NOTE: Purchased New in 2014, Used for 2...

4" National Upset Forging Machine - Re:24376

• Manufacturer: National

Equipped with Air Clutch & Brake The machine is available for inspection at our Cleveland, Ohio warehouse on request.

6" National Automated Forging Cell Re:24889

• Manufacturer: National

Very good working condition Available for immediate inspection and delivery Still installed and under power for inspection

40,000 kg Schloemann (Beche) CounterBlow Forging

• Manufacturer: Schloemann (Beche) DGH 40

Size: 40,000 kgs | Stroke: 1,250 mm | Ram l-r: 3,200 mm | Ram f-b: 3,000 mm | Bpm: 80 | Anvil l-r: 3,000 mm | Anvil f-b: 4,800 mm | Between the guides: 1,200 mm | Total hammer weight: 235,000 kgs | Floor space l...

National #2 Forge Reduceroll Re:24617

• Manufacturer: National

This machine is available for viewing in Cleveland, Ohio.

9" National High-Duty Heavy Upset Forging Machine (Upsetter) - has never been cracked, Re:24440

• Manufacturer: National

Location: Our Cleveland, Ohio Rebuild Facility - in storage and available for inspection. Very good working condition

1,250 kg Lasco model KH-125 Forging

• Manufacturer: Lasco

Additional Info: Weight of falling ram: 1250kg Way between the slides: 500mm Motor power: 22kW Weight of anvil: 19 tons Total weight: 31.5 tons Height above floor: 5000mm Total Height: 5700mm

8,000 lb Erie Drop Forging Hammer, Re:25971

• Manufacturer: Erie Press Systems

Dismantled and moved to storage Very good working condition

6,200 kg Nittan Air Forging Hammer, Model ADH-60-I,

• Manufacturer: Nittan

Additional information: Standard dropping section weight (upper mold not included) (kg): 6200 Standard upper section weight(Nominal value) (kg): 1800 Stroke（ｍｍ）: 1300 Cylinder diameter: 580 mm Piston diameter: 21...

2-1/4" National #4 Reducer Roll (Forging Rolls) Re:25345

Available for immediate inspection and delivery Dismantled and moved to storage

1980 25 to 75mm dia HELIPEBS H65 Roll Forged Steel Grinding

Additional info: The walking beam furnance has the capacity to heat bars to 6 meters in length, making the use of material more efficient, and the line has a band saw, in case the process requires bars of shorter...

1992 2" Hatebur AMP 50 4-Die Hot Former, 800 Forge tons,

Dia: 50 mm | Tons: 800 tonnes | Builder: Hatebur | Part dia: 92 mm | Max cutoff length: 110 mm | Part wt: 2 kgs | Min initial part weight: kgs | Min cutoff length: 32 mm | Max outer dia for combination parts: 82...

1-1/8" Hasenclever WSHK-100 w/Ajax pwr spl, 80kW Toccotron

• Manufacturer: Hasenclever

Specs: 100 tons of Upsetting Force 125 tons of Gripping Force Total stroke of header slide: 180mm Effective Upsetting stroke: 112mm Stroke of top gripping jaw: 85mm Dimension of gripping jaws: height of one jaw: ...

1,000 ton Etchells model MF40/1000 S.P.H. Vertical

• Manufacturer: Etchells

Additional info: • Four (4) Tie-Rod Construction • Horizontally opposed griping dies • Multi-Directional adjustment by wedges • Flat-Base Construction • Overload protection • Adjustable front stock gauging device...

4" National High Duty Automatic Tong Feed Upsetter Re:24625

• Manufacturer: National (ATF)

Built new in the 1970's. This machine is located in Europe and may be inspected there on request. It has an Auto Tong Feed System equipped with automatically operating mechanical tongs. An ATF machine will take t...