Used Extruders in Illinois, USA

WELEX TWO STAGE 4.5″ EXTRUDER 12344

• Manufacturer: Welex

Welex 4.5″ extruder screw, 2 stage 36:1 L/D, S/N 180359.

4.5″ TWO STAGE EXTRUDER SCREW 12023

Two stage 4.5″ extruder screw with chrome plated mixing pins at the end of first stage. Approximately 28:1 L/D, single key shaft.

BRABENDER 3/4″ LAB EXTRUDER 18623

• Manufacturer: Brabender

Used C.W. Brabender Independent Table Top Extruder. S/N 1067/4. Type IND/EXTR/16-04-000. 3/4″ diameter 25:1 L/D ratio barrel. Four (4) zone temperature control panel. Extruder driven by a 1 HP D/C motor with SCR ...

CINCINNATI EXTRUSION 45MM EXTRUDER 18639

• Manufacturer: Cincinnati

Used Cincinnati Extrusion model Alpha 45-28G 45mm (1.77″) single screw extruder. S/N U2203. 28:1 L/D five (5) zone electrically heated, air cooled, and non-vented barrel at a 42″ centerline height. Hersteller Wat...

DELTAPLAST 5 HP PEDESTAL EXTRUDER 18675

One (1) used 30mm Deltaplast model DVH 30.125:24 pedestal extruder. S/N WO281:1.91. Having a 24:1 L/D ratio. Unit has a three (3) zone electrically heated, air cooled, and non-vented barrel. Radicon (David Brown)...

WAYNE MFG 3/4″ EXTRUDER 17885

• Manufacturer: Wayne

One used 3/4″ 20:1 L/D Wayne laboratory extruder having a two (2) zone electrically heated, air cooled barrel. Gearbox is belt driven by a 2 HP DC Motor with controls. Unitized temperature control panel with thre...

DAVIS STANDARD SINGLE STAGE EXTRUDER 12020

• Manufacturer: Davis-Standard

4.5″ Davis Standard single stage extruder screw. Approximately 28:1 L/D with mixing pins at screw end.

3.5″ TWO STAGE EXTRUDER SCREW 12026

3.5″ two stage chrome plated extruder screw, approximately 24:1 L/D, dual mixing section and dual key shaft.

3.5″ TWO STAGE EXTRUDER SCREW 12025

Two stage 3.5″ chrome plated extruder screw, approximately 24:1 L/D, dual mixing section and dual key shaft, unknown manufacturer.

DAVIS STANDARD 2.5″ EXTRUDER BARREL 7778

• Manufacturer: Davis-Standard

Davis Standard 2.5″ extruder barrel screw. 24:1 L/D.Three are available.

CINCINNATI 63mm TWIN SCREW EXTRUDER 19071

• Manufacturer: Cincinnati

Used Cincinnati conical counter rotating twin screw plastic extruder discharge. Nominal 63 mm diameter (2.5″) screws at the discharge and nominal 115 mm diameter screws at the feed. Barrel is electrically heated ...

CINCINNATI 80mm TWIN SCREW EXTRUDER 18511

• Manufacturer: Cincinnati

Used Cincinnati model CMT80L-APC 80mm conical counter rotating twin screw plastic extruder. S/N 2040985/010. Screw length approximately 1,665mm long x 80mm diameter at the discharge. Has adapter plate that reduce...

BATTENFELD CM55 TWIN SCREW EXTRUDER 18510

• Manufacturer: Battenfeld

Used Battenfeld-Cincinnati model CM55 counter rotating twin screw extruder. S/N 2804784/010. Conical screw design. Barrel is electrically heated and air cooled in three zones with air blowers with .20 kw motors. ...