Used Dryers in New Jersey, USA

Hankinson 801600 Dryer-Air - IPP# 208891

• Manufacturer: Hankinson

compressed air dryer 200 PSIG maximum With 7.5HP compressor 30 Lb charge

70 Cu Ft DeDietrich Glass Lined Vacuum Dryer, Model SR3030

• Manufacturer: De Dietrich

70 Cu Ft DeDietrich Glass Lined Vacuum Dryer, Model SR3030 Used 70 cu ft DeDietrich glass lined double cone vacuum dryer, model SR3030, 107 cu ft total capacity, 70 cu ft working capacity, rated 40 PSI and full v...

Dryer-Drum 456 mm (18 in) Stainless Steel 316 - IPP# 704610

• Manufacturer: Simon Dryers

single drum dip feed dryer M/C #4586 Drum cored for steam heating (2-50mm openings) Speed 1 to 6 rpm Drum totally enclosed in 316 stainless steel chamber Motor: non-flameproof motor Drum with monel adjustable sta...

Multivac Dryer Te 115 #17504

• Manufacturer: Multivac

All stainless steel food grade air drying tunnel by multivac, type te 115, serial # 172198. Features all stainless steel food grade construction, stainless steel mesh conveyor with discharge apron is 24" wide (23...

Dryer-Rotary Vacuum Paddle - IPP# 247251

Dryer-Air Carbon Steel - IPP# 245818

• Manufacturer: Atlas Copco

8.5kW, 3/50/400 volt, air pressure max 13 bar @ 55 degrees C, built in an acoustic cabinet

Dryer-Flash Stainless Steel - IPP# 207113

• Manufacturer: APV Anhydro

APV spin flash dryer system 1450 Kg/Hr air flow , 685 Kg/Hr feed volume 70% DS in the feed, 485 Kg/Hr powder production @ 1% humidity. Direct heated, 22 NCuM/Hr gas conusmption, 15 Kw power consumption, 7 NCuM/Hr...

Dryer-Rotary Vacuum Paddle - IPP# 247250

Dryer-Air Carbon Steel - IPP# 245817

• Manufacturer: M.T.A spa

3/50/400 volt, IP22, refrigerant max pressure 22.6 bar LP side, 26 bar HP side,

Dryer-Drum 508 mm (20 in) - IPP# 102227

• Manufacturer: Blaw Knox

chrome plated single drum dryer Has jkt feed pan Belt driven by US varidrive Motor: 3 phase 3/60/230/460 volt, 5.4 rpm min 54 rpm max Has hood 12" x 30" side access panel Has 8" x 8" discharge w/chute and manual ...

Dryer-Rotary Vacuum Paddle - IPP# 247266

Dryer-Flaker Drum and Belt - IPP# 703637

• Manufacturer: Correa

chrome plate drum only For use with Gouda drum flaker

Dryer-Flaker Drum and Belt 300 mm (11.8 in) - IPP# 704614

• Manufacturer: R.Simon Dryers

face chrome plated single drum flaker/dryer Drum working pressure 5.5 bar, speed 3 to 21 rpm, cored for steam/hot oil heating

Littleford Dryer Fkm 2000 E #17382

• Manufacturer: Littleford

Littleford dryer model fkm 2000 e, 71 cubic foot total capacity, 42 cubic foot working capacity, 22 to 52 cf working capacity, 304 stainless steel construction, fully jacketed body rated for 75 psi @ 500 f, three...

Carbon Steel Dryer-Holoflite & Screw - IPP# 222019

• Manufacturer: Joy Denver

Dryer or Cooler Trough rated 80 psi @ 650 F. Double Screw design with 3" Johnson joints on shafts. Total heat transfer area is 571 Sq.Ft., screws are 445 Square foot surface area, jacket is 126 Sq.ft. surface are...