Used Agitators, Blenders, Mixers in Texas, USA

BLENDERS 103306

• Manufacturer: Patterson-Kelley

60 LB PER CUBIC FOOT MATERIAL DENSITY WITH INTENSIFIER BAR; TWIN SHELL INTENSIFIER BLENDER GEAR DRIVE; MAIN DRIVE: U-L CODED 25 HP; 1770 RPM; 208-220/440 VOLTS; INTENSIFIER DRIVE: 10 HP; 1760 RPM; 220/440 VOLTS;...

BLENDERS 107280

• Manufacturer: GAULD

TWIN PADDLE MIXER/FEEDER; BUILT IN 1990; 4" DIAMETER SHAFTS; 18" X 5' LONG TROUGH; PADDLE RPM 61;

BLENDERS 107279

• Manufacturer: GAULD

TWIN PADDLE MIXER/FEEDER; BUILT IN 1990; 4" DIAMETER SHAFTS; 18" X 10' LONG TROUGH; PADDLE RPM 61;

BLENDERS 114583

• Manufacturer: Kason

Used Double Ribbon Kason Blender. 18 cubic feet capacity. Inner Ribbon: 1 5/8"w x 3/8"thk.; Outer Ribbon: 1 1/4"w x 3/8"thk. Trough Dimensions: 35"L x 32"w x 26"d. Shaft diameter 3 1/4". Motor: 4 hp, 3 phase, 60 ...

BLENDERS 114577

• Manufacturer: Kason

Used Double Ribbon Kason Blender. 18 cubic feet capacity. Inner Ribbon: 1 5/8"w x 3/8"thk.; Outer Ribbon: 1 1/4"w x 3/8"thk. Trough Dimensions: 35"L x 32"w x 26"d. Shaft diameter 3 1/4". Motor: 4 hp, 3 phase, 60 ...

BLENDERS 111007

• Manufacturer: Engelsmann

PASTEN BUNKER; MFG. BY ENGELSMANN IN 2009; 8 m3 CAPACITY; LUG SUPPORTS; 5 HP, 1800 RPM, 460 VOLTS BOTTOM DRIVEN PLOW/AGITATOR ASSEMBLY; 5 HP BOTTOM DISCHARGE TWIN SCREW FEEDER; AGITATED HOPPER MAX FILL WEIGHT 22,...

QTY. 1. CORNING LM-2 AGITATING RING STAND MIXER WITH VARIABLE SPEED CONTROL AGITATOR

• Manufacturer: Corning

QTY. 1. CORNING LM-2 AGITATING RING STAND MIXER WITH VARIABLE SPEED CONTROL AGITATOR

AGITATORS 93428A

• Manufacturer: Lightnin

Used Lightnin R.A.D. Agitator. (2) Sets of 80" diameter blade span and (1) Set of 66" diameter blade span. 6 1/2" Shaft x 17'11" Long.

BLENDERS 101191

• Manufacturer: PAUL ABBE

10 CUBIC FOOT DOUBLE CONE MIXER; 1HP; 1725 RPM; Qty: 1 | Alloy: S | Cubic feet: 10 | Material: 304SS | Dia.(ft'in"): 3'0" | Length (ft'in"): 1'4" | Hp: 1 | Driver type: MOTOR | V/h: V | Jacketed y/n: N

BLENDERS 107281

• Manufacturer: GAULD

TWIN PADDLE MIXER/FEEDER; BUILT IN 1990; 4" DIAMETER SHAFTS; 18" X 8' LONG TROUGH; PADDLE RPM 61;

BLENDERS 66202

W/BOLTED COVER; W/15 HP CHAIN DRIVEN VARI-DRIVE; W/INTERNAL REMOVABLE DIVIDER 3'6" FROM DRIVE END, W/BOTTOM DISCHARGE FOR EACH SECTION; 24" WIDE X 2'2" DEEP TROUGH; 2.5...

AGITATORS 109755

SHAFT/BLADES ONLY; (4) PITCHED BLADES WITH 18" SPAN;

AGITATORS 107028A

Previously mounted on a 6000 gallon vessel/reactor; 16" mounting flange;